Can ST3160815AS be removed from the hardware in the lower right corner of the computer?

1.Boot the computer and press del to enter the BIOS, and enable the IDE mapping function. Map SATA to PATA devices. (It will affect the performance of the serial port hard disk, which is equivalent to using SATA hard disk as a PATA hard disk) Please refer to the motherboard manual for specific operations.

2 "Start --- Control Panel--- Add Removal Program - NVIDIA Drivers, click "Change Delete", just uninstall the NVIDIA SW IDE driver, and the icon will be gone after rebooting (but then your serial port hard disk will use the IDE channel, such as more IDE devices, such as: optical drive, burner will affect the performance of your hard disk).

3.This phenomenon will not occur when installing the motherboard driver without the motherboard driver, but it will definitely affect the stability, performance and compatibility of disk reads without installing the motherboard driver, so it is strongly recommended not to do so.

4.Wait for NVIDIA to release a new motherboard BIOS or driver (yes, not necessarily it).

Suggestion: Hide it (Actions: Taskbar - Right Click - Properties - Taskbar - Hide inactive icons "Tick in front of "Customize......You should know how to do it after that).

Your hard drive is a Seagate 160G serial SATA hard drive (ST3160815AS), which is plug and unpluggable, and like a USB drive, all have "safe hardware removal standards", of course, you don't need to delete your hard drive.

So what do you mean: in the bottom right corner of the taskbar you click on the "Safely Remove Hardware" icon, and then wait a minute, "Safely Delete ST3160815AS - Drive (G, F, E, D, C) drives" appears, and then you click in, and then "Unable to stop the 'ST3160815AS' device now." Please wait before stopping the device.

Is that so, and if so, I don't need to say it. (How can you delete the hard disks that are working).

In the right-click properties of the taskbar, there is a customization, find the icon to safely delete hardware, and change it to always hide.

Put the operating system that is connected to your computer system in the CD-ROM and then open the control panel, open the Add and Remove program, select Add and Remove Windows Components and check everything up, anyway, it's okay and then start the installation, after the installation is successful, restart it. If you can't install it, please reinstall the operating system, or right-click on My Computer Properties Hardware Device Manager In the dot disk drive there will be your hard drive and the USB flash drive you inserted, you can select your USB flash drive and right-click to uninstall it.

- Give it a try.

This is a feature of SATA hard drives, which you can hide by modifying the registry.

Double-click to stop on the pop-up window; Or you can simply right-click and select the hardware you want to remove.

In addition, if it cannot be deleted, this may be because there may be files saved in the clipboard with your USB flash drive, which can be ...... in C:D:EJust copy a file from your computer's hard drive and delete it.

Right-click on the flag, then click Safely remove hardware in the dialog box that appears again, click Properties, and then select below, Don't use this device (deactivate), click OK.

This doesn't seem to be easy to delete,

This is your host hard disk can not be deleted deleted Your system is not hung up, the serial port hard disk will have that, the serial port hard tong bi lifting disk can be hot-swapped, the authority Biran Huizhi can not be a system disk If you still have a hard disk connected below, it can be ejected like a USB flash drive.

It is estimated that LZ is a virus problem, and I don't even make a picture, and I can't help it.

1: Change the system It is recommended to change the XP SP3 I have been using the hardware compatibility of various brands is very good.

2: Backup important files on the grid - restore the system.

3: Kaspersky Antivirus cleans up system junk.

4: No 4 If none of the above is enough, it is recommended that you send it to the repair station to have someone test the hardware. It is estimated to be a hard drive failure.

PS: Good luck!

Yours is a brand machine, right? It should be the hardware on the card reader that he brings, whether you delete it or not, it's fine.

Try a different camera.

There should be a card reader or something on my computer, and I have that icon on my computer, and mine is a notebook with a card reader plugged into it, and I usually have it. This one doesn't matter.

The triangle icon in the lower right corner of the stand-alone machine first.

In the menu bar that pops up, select "Customize."

In the pop-up interface, find "Windows Explorer" in the picture

1. If you select "Show notifications only", the icon will only be displayed when inserted into external memory such as a USB flash drive;

2. If you select "Show Icons and Notifications", it will be displayed regardless of whether it is inserted into an external memory such as a USB flash drive;

3. If you select "Hide icons and notifications", it will not be displayed regardless of whether it is inserted into an external memory such as a USB flash drive.

Plug and unplug the USB flash drive again. And User Configuration - Administrative Templates - System - Removable Storage Access - Removable Disk Deny Write Permission and Removable Disk Deny Read Permission are both disabled. Plug it back in.