What should I do if the refrigerator can t close the door after cleaning?

<> if you find that the seal does not close after cleaning the refrigerator, it may be due to damage or deformation during cleaning, and the seal will not return to its original shape. Here are some possible solutions: self-ordering.

1.Adjust the position of the sealing strip: First, you can check that the sealing strip is properly installed in the sealing groove of the refrigerator door. If not, put it back in the sealed slot properly and try to close the refrigerator door.

2.Soften the seal with hot water: You can try softening the seal with hot water and then gently stretching it back to its original shape. Then try to close the refrigerator door.

3.Use a hair dryer: You can use a hair dryer to heat the seal so that it is soft, and then try to close the refrigerator door. Please note that a certain safety distance should be maintained when using the hair dryer to avoid damage or fire.

If none of the above methods can solve the problem, it is recommended that you contact the refrigerator manufacturer or professional maintenance personnel for inspection and repair. Do not attempt to force the refrigerator door shut with excessive force or tools to avoid further damage or safety hazards.

For the method of refrigerator seals are not tight:

Hair dryer. Shaping method: In a place with poor sealing, use hot air with a hair dryer.

Blowing, the blowing time should not be too long, the plastic door seal can be hardened, and the blowing should be stopped for about two minutes to avoid the deformation of the door seal.

Hot water washing and shaping method: You can connect the refrigerator door, cut the adhesive of the 4 corners of the door seal with a knife, and take out the magnetic strip. Remove the door seal, just place the deformed door seal at 60 degrees Celsius.

Wash in hot water on the left and right, turn it from time to time, pick it up after 7-8 minutes, put it on a flat countertop and gently straighten it with your hands. When heated, the sloping door seal will be flat and straight. After the seam of the door seal is melted, take out the hacksaw blade, pinch it for a while and then exert force, and the door seal will stick firmly.

Use white rubber to repair the door seal: if the door seal is slightly deformed and the plane is not bent, you can use the screws of the same door seal to pad the white rubber in the plane where there is a gap, and then tighten the screws again to avoid the gap.

You can also stuff some soft plastic foam into the gap of the door seal to solve the problem and tighten the door seal.

In addition to the refrigerator door seal iron filings method: the magnetic door seal conducts iron filings or metal powder, so that the door is reopened strictly.

After the refrigerator is cleaned, the sealing strip cannot be closed, and the sealing strip should be replaced with a new one, so that the door can be closed.

Is the seal already on the phone? It's aging, or it's not very good, it's not elastic. Can you change the tone of the place where you want to repair the refrigerator? If you can change the rubber strip yourself. Or is it a different one?

Soak in hot water and replace the sealing strip.

If the hot water soaking refrigerator seal is deformed, then I can remove it, and then put the deformed part into the prepared hot water to soak, soak for about 10 minutes or soak out, and at the same time place it on a flat countertop, gently straighten it. You can also use a hair dryer to blow hot air to blow up the bad seal of the refrigerator door, and it will be good after cooling. The hair dryer should not blow for too long, the distance should not be too close, and the temperature should not be too high.

Eliminate iron filingsIf you find that there are some iron filings or metal powder stuck on the refrigerator sealing strip, then it will also cause the refrigerator door to be closed loosely, at this time, just use a brush or rag to remove the iron filings. Replace the sealIf the refrigerator seal is seriously aged, it needs to be replaced with a new one, otherwise it can no longer be used. You can replace it yourself or report for repair, so that professionals can deal with it to avoid more serious damage.

If the refrigerator does not have a sealing strip, then the refrigerator door will not close tightly, which will seriously cause the refrigerator to waste electricity, and if the refrigerator does not have a sealing strip, the refrigerator will not work normally. Therefore, it can be seen that the refrigerator seal has brought great convenience and plays a very important role in life.

If the refrigerator does not close the door after cleaning, there may be the following situations:

1.Bending and deformation of the seal: During the cleaning process, the seal may be twisted or bent, resulting in a loss of fit with the refrigerator door. At this point, you can use a hair dryer to heat the sealing strip and restore it to its original shape.

2.Improper adjustment of the refrigerator: Sometimes, when the refrigerator is reinstalled after cleaning, the refrigerator is not placed horizontally, resulting in the refrigerator door not aligning with the sealing strip. By adjusting the height of the screw at the bottom of the refrigerator, the problem that the door cannot be closed can be solved.

3.Loose door hinges: Loose hinges on refrigerator doors can affect the tightness of the seal. At this point, you can tighten the screws on the door hinges or replace the damaged parts.

4.Weatherstrip old rub lithification: Seals are easy to age, harden and even crack after being used for a long time. If the seal has problems such as aging and hunger, it needs to be replaced with a new one.

If your refrigerator does not close properly after cleaning, first check whether the seal has been bent or deteriorated. If there are no problems, you can try adjusting the height of the screw at the bottom of the refrigerator or checking the stability of the hinges. If the above methods do not work, it is recommended to contact the refrigerator after-sales service personnel for inspection and repair.

The refrigerator seal is too tight, which is usually caused by a leak in the seal. At this time, the air outlet of the hair dryer should be aligned with the leakage position of the sealing strip, and then open the hot air gear for hot air blasting. When the leak location is blown up, the hot blowing can be stopped.

When the temperature of the seal drops, the refrigerator door can be closed tightly.

It should be noted that the heat blowing time should not be too long, the distance should not be too close, and the temperature should not be too high.

Clean the box for moldy seals:

1.Vinegar. You can use a rag dipped in vinegar to clean the moldy area. Vinegar can not only remove stains and mold, but also have the effects of disinfection, sterilization, and deodorization. So vinegar can also be used to clean the inside of the refrigerator, which is safer and more effective than refrigerator deodorant.

2.Toothpaste. It can also be cleaned with toothpaste.

Apply some toothpaste to the moldy area first and wait for a while. Then, wash and wipe repeatedly with a soft rag. During the wiping process, do not pull the sealing strip too hard, otherwise it is easy to cause the sealing strip to deform and close loosely.

Finally, wash the moldy area with clean water.

Enter the area and get the decoration for free**].

Nowadays, people's lives are becoming more and more convenient, and refrigerators have become an indispensable device in our daily life. So the question is, do you know what to do if the refrigerator seal is not sealed? What are the reasons for the loose sealing of the refrigerator?

Let me give you a brief introduction.

How to deal with the refrigerator seal if it is not sealed.

1. Soak in hot water.

If the refrigerator seal is deformed, it is recommended to disassemble it, then soak the deformed part in hot water, take it out and burn it for about 10 minutes, and place it on a flat countertop at the same time, and gently straighten it.

2. Blowing and shaping.

Of course, you can also use the hot air of a hair dryer, especially in an unsealed area, until it cools. Of course, we need to remind everyone here: don't blow the hair dryer for too long, don't get too close, and don't get too hot.

3. Eliminate iron filings.

If you see dirt sticking to the sealing strip, it will definitely cause the refrigerator sealing strip to not seal. At this point, you need to wipe the iron filings clean with a brush or rag.

4. Replace the sealing strip.

In addition, if the seal is severely deteriorated, it needs to be replaced with a new one, and it is not recommended that you continue to use it. Of course, if you don't know how to replace it, it is recommended to find a professional to deal with it to avoid damage.

What are the reasons why the refrigerator seal is not tight.

1. Aging of sealing strips.

In daily life, due to the frequent use of refrigerators and the absorption of foreign objects on the box, it is inevitable that the sealing strip will be aged, deformed, and partially sunken and deformed after a long time.

2. The suction of the sealing strip becomes smaller.

Sealing strips, due to their strong suction, have a certain tightness. Nowadays, the refrigerator on the market is mainly drawer-type, and when the refrigerator is not designed with high technology, it causes the refrigerator door to loosen and other phenomena.

Summary: After reading the above introduction, I believe that Han's Shouter has a further understanding of how to deal with the refrigerator seal if it is not sealed. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.

Do the math how much it will cost you to renovate your home

The solution to the unsealed seal on the refrigerator door is to replace the seal.

If the refrigerator seal itself is not sealed due to aging, you can only choose to replace the refrigerator seal with a new one. Then it can be used normally. Poor sealing of refrigerator doors will affect the stability of indoor airflow and temperature, making the refrigerator need more power to maintain a constant temperature.

This not only wastes a lot of electricity, but also increases the electricity expenditure of the family.

Secondly, users should also know that if the refrigerator door is not tightly sealed, it will lead to unstable indoor temperature, and the perishable foods such as vegetables and fruits that we put in the refrigerator are easy to mold and deteriorate, and perishable foods such as meat and seafood will also lose their freshness due to insufficient temperature. Therefore, the question of whether the refrigerator door seal is in place is still very important.

Precautions for refrigerator sealing

A well-sealed refrigerator prevents cold air from escaping and keeps the temperature within the proper range, so the freshness and shelf life of the food can be guaranteed. Secondly, a well-sealed refrigerator can effectively prevent external odors from contaminating the food and ensure the original taste and hygiene of the food. A well-sealed refrigerator can effectively reduce the waste of energy, as the refrigerator no longer needs to be cooled frequently.

Many people use refrigerators close to the cracked surface of the wall, which is obviously incorrect. Because the wall will absorb the heat emitted by the refrigerator, the temperature at the back of the refrigerator will rise, and the cooling effect will be lost. Moreover, clinging to the wall will also make it more difficult to open and close the refrigerator door, which can easily cause the refrigerator sealing strip to deform and affect the sealing.