How to install the squatting toilet water tank and how to disassemble the squatting toilet water tan

The water tank is a container used to hold water, using which we can flush off some dirt in time, which is more common in life, and everyone should know it. However, most users may not know much about the installation of the squatting toilet water tank, because recently I have seen many netizens on the Internet asking how to install the squatting toilet water tank? The installation process of the squatting toilet tank is relatively troublesome, but the following is a detailed list of steps for the installation of the squatting toilet tank, which should help everyone.

Squatting toilet tank installation steps

Step 1: Prepare a tape measure.

Then use a tape measure to measure the size of the original squatting toilet tank, and also need to measure the installation height of the wall.

Step 2: After purchasing a suitable squatting toilet tank, first check all the accessories of the squatting toilet tank, check whether all the spare parts are available, and understand the purpose of all the accessories of the squatting toilet tank, and understand the installation location of the spare parts. The drain of the squatting toilet.

On the right, to the left of the squatting toilet is the water tank, and in the middle of the squatting urinal is a connecting cup and a conical washer.

Step 3: Officially you can install the squatting toilet tank, the first step of its installation is the assembly of the drainage pipe, first of all, the two straight pipes are connected, and then the elbow is connected, after the straight pipe and the elbow are all connected, the connected pipe is installed to the original pipe, and some of the original pipes can not be replaced.

Step 4: There are two more water valves in the squatting toilet pipe, one is the water inlet valve and the other is the drain valve. Both valves need to be installed, installed in the tank, then inspected for problems, and finally the lid of the tank closed.

Step 5: Place the hook of the hanging tank.

Hang it on the wall, put the screws on the wall, and finally place the tank on top of the hook.

Step 6: Place the tapered rubber.

Place the ring and the connecting cup, then put the connecting cup on top of the drain pipe, and finally install the drain pipe to the bottom of the water tank.

Step 7: After all the spare parts are installed, the installation of the water tank of the squatting toilet is basically completed. Finally, the hose will be added.

It is connected to the water inlet outside the tank, and after the connection is completed, it is necessary to test the water. Check whether the pipeline has a water leakage problem, once the problem is found, it must be dealt with in time, and you can check the manual for reinstallation.

The above is the installation steps of the squatting toilet water tank, after learning to install, when we have problems in the future, we can easily solve them, not only save costs, but also solve problems in time.

It's simple, get to know it

Disassemble the squatting toilet water tank, prepare the squatting toilet water tank, open the buckle on the left side of the squatting toilet water tank, and open the buckle on the right side of the squatting toilet water tank; The specific steps are as follows:

1. Prepare the squatting toilet tank.

2. Open the buckle on the left side of the squatting toilet tank. As shown below:

3. Open the buckle on the right side of the squatting toilet tank. As shown below:

4. Buckle up the upper cover on the left side of the squatting toilet tank.

5. Buckle up the upper cover on the right side of the squatting toilet tank.

6. The squatting toilet tank is disassembled.

Disassemble the squatting toilet water tank, prepare the squatting toilet water tank, open the buckle on the left side of the squatting toilet water tank, and open the buckle on the right side of the squatting toilet water tank; The specific steps are as follows:

1. Prepare the squatting toilet tank.

2. Open the buckle on the left side of the squatting toilet tank. As shown below:

3. Open the buckle on the right side of the squatting toilet tank. As shown below:

4. Buckle up the upper cover on the left side of the squatting toilet tank.

5. Buckle up the upper cover on the right side of the squatting toilet tank.

6. The squatting toilet tank is disassembled.

The squatting toilet water tank is mainly divided into the box body, box cover, water inlet valve, water outlet valve, pipe fittings, etc., if you need to disassemble the box cover, open the box cover first, and the water inlet and outlet valves are unscrewed from the bottom nut of the box, but if the factory is too tight, you need to use tools to do it.

The squatting toilet water tank is a container commonly used to fill water in our bathroom, we can use it to flush away some dirt in time, Bili must have seen many of us have seen it, so how is the squatting water tank installed? Next, I will introduce to you how to install the squatting water tank.

1. Squatting water tank installation - measure the size.

We first need to prepare a tape measure, and then use the tape measure to measure the size of the original squatting toilet water tank, and also need to measure the height of the wall installation.

Second, squatting water tank installation - check the accessories.

After purchasing the water tank, first check whether all the accessories of the squatting toilet tank are complete, and understand the purpose of all the accessories of the squatting toilet tank, and also understand the installation of spare parts. The drain pipe of the squatting toilet is generally on the right, and the left side of the squatting toilet is the water tank, and the middle of the squatting toilet is a connecting cup and a conical washer.

3. Squatting water tank installation - formal installation.

The installation step is the assembly of the drainage pipe, first of all, the two straight pipes should be connected, and then the elbow pipe is connected, the straight pipe and the elbow pipe are all connected to Sun Xi, and the connected pipe is installed to the original pipe part, and some of the original pipes can not be replaced.

Fourth, squatting water tank installation - water valve installation.

One of the squatting piping pipes is the inlet valve, while the other is the drain valve. We want to install it in the water tank, and then we need to check it for some problems, just close the lid of the water tank.

Fifth, squatting water tank installation - parts installation.

Hang the hook hanging the tank above the wall, place the tank on the hook after placing the screws on the wall. After placing the conical rubber ring and the connecting cup, put the connecting cup on the top of the drain pipe, and install the drain water pipe to the bottom of the water tank.

Sixth, squatting water tank installation - inspection.

It is also necessary to connect the hose to the water inlet on the outside of the tank, and after the connection is completed, it is necessary to test the water. Check whether the pipe has a water leakage problem, and once the problem is found, it should be dealt with in time, and you can check the manual to reinstall it.

1.Preparation.

Squatting water tank is a common toilet accessory at present, not only beautiful and generous, but also very convenient to use, you need to prepare some tools and materials before installation, including screwdrivers, wrenches, pliers, water pipes, etc., but also need to prepare the squatting water tank itself and the placement of the toilet water tank.

2.Dismantle the old toilet tank.

Before installing the squatting water tank, you need to disassemble the old toilet water tank, use a wrench and pliers to remove the screws of the water pipe and the old bulk water tank, and remove the old water tank from the base, and then put the old water tank aside.

3.Install a squatting water tank.

When installing the squatting water tank, you need to first fix the squatting water tank with the gaskets and screws on the base, and then tighten the water tank with the base. Next, you need to fix and install the accessories in the water tank according to the instructions on the water tank, such as the water inlet valve, water level regulator, etc., to ensure that the components inside the water tank are firmly installed to avoid leakage.

4.Connect the water pipes.

Next, you need to connect the water pipe to the water tank, using a wrench to connect the water pipe to the water inlet valve. After that, the faucet needs to be turned on to check whether the installation is correct, and if there is a problem, it needs to be repaired in time.

5.Test the tank.

After the installation is completed, the water tank needs to be tested to detect whether the water flow is normal and whether the water level adjustment is accurate to ensure the correct installation. If any problems are found, they need to be dealt with in time until the installation is completely correct.

6.Cleaning operation.

After full installation, we need to clean the newly installed squatting tank to ensure that it is clean and hygienic, and also to extend its service life.

7.Installation checks.

After the installation is completed, it is necessary to check the fixation of the squatting toilet seat and the water tank again, check whether there is water leakage at the water pipe interface, and whether the water tank has abnormal noises and other abnormal conditions. If there is a problem, it needs to be dealt with in time to ensure its normal use.

8.Conclusion.

With the above steps, the installation of the squatting tank is complete. In addition to the above steps, you also need to pay special attention to the details in the installation process, such as the fixing of screws, the connection of water pipes and so on. Only by taking care of each step can we ensure that it is used properly.