How to install a wifi router, how to install a wifi router tutorial

The general installation method is to connect the network cable given by the telecom to the WAN port of the router, and then connect a network cable from any LAN port on the router to connect to the computer, open the browser on the computer, and the input may also be etc., there will be a default IP on the back of the router) Enter, enter the router according to the default username and password on the back, and then set it step by step according to the router's setup wizard.

Connect the connection between the router and the cat and turn on the power, open the computer web page, enter the enter key in the web bar to confirm, enter the default user name: admin password: admin click OK to enter the setup wizard to enter the next step, enter the Internet and password password click Next, set the password lock type and the connection router password, click Next, click Restart, and the router setting is completed.

After the power is turned on, connect the wireless router to the computer, open the browser and enter in the address bar: to enter the settings interface of the wireless router. According to the setup wizard step by step, select the Internet access method, and restart the wireless router after the setup is completed.

Next, go to the wireless settings and set the SSID name

The router is powered on, connected to the network cable, and then set up the basic connection to the Internet, find the wifi settings page to set up, and most of the routes can be used only by setting the password!

Installation steps: Get the network cable from the modem and connect it to the WAN port of the router.

Secondly, use a network cable to connect the computer to any of the LAN ports (marked on the router).

The next thing is to enter the routing interface to set the password (please refer to the routing manual for the specific setting method).

Hello, 1.Installation.

One end of the router is connected to the power port, and the other end is connected to a power outlet. This will automatically boot the router.

Then, use a network cable to connect one end to the LAN port of the optical modem, and the other end to the WAN port of the router.

If the router is the latest wireless router, you can connect to the Internet directly. If it is some of the common routers that we commonly see, you need to set it up before you can surf the Internet. If you have extra network cables, you can connect one end to the LAN port of the router and the other end to the network cable interface of the computer.

Once connected, open your computer's browser. Enter the IP address of your router in the input field at the top of your browser. Most of the IP addresses default to No, please see the manual) and press the keyboard confirmation key.

Next, enter your router's login password in the login panel that appears. If you don't know the login password, you can check it on the back of the router. After entering, click Confirm below to log in.

After logging in to the game, click on the setup wizard on the left, and an interface will pop up on the right. Click Next.

On the Select Router Internet Access Mode page, select Automatic Router Acquisition, and then click Next.

Next, the router will automatically get the Internet access. Wait patiently for 10 to 20 seconds. On the wireless settings screen, select the wireless encryption method, and then enter the wireless password. When you're done losing, go ahead and click Next.

On the page that appears, click Done at the bottom right. You can save all your settings. At this time, most routers are capable of Internet access.

If you can't access the Internet, click Network Parameters on the left to enter the Network Parameters page.

After making the changes to the end of the changes, click Save below. The router will automatically restart, and after restarting, you can surf the Internet.

2.If something goes wrong, do a factory reset and start all over again.

If something goes wrong, you can do a factory reset! First plug your router into power, then keep holding the reset button for more than 6 seconds, then release the button. At this point, the router will automatically restart, and all the lights will turn off and then flash again.

Here's how to install a wifi router:1. First prepare the router and computer.

2. The leftmost one is the power interface, which is powered by the power cord.

3. The middle is the WAN port, which is connected to the broadband interface through the network cable, so that the router has a network.

4. There are a number of LAN ports on the right, which can be connected to the computer through the network cable, so that the computer can have a network.

Introduction to WiFi routersA WiFi router actually converts a wired network signal into a wireless signal through a WiFi wireless router for receiving it by a computer, mobile phone, PDA, etc. that supports its technology. For example, ADSL at home, community broadband, etc., as long as you connect a WiFi router, you can realize wireless Internet access for WiFi devices. Commonly known as a wireless router, some people also call it a wireless signal transmitter, which needs to be used at the same time with terminal equipment such as wireless network cards.

A WiFi router has four elements, including an input port, an output port, a switch switch, a route processor, and other ports.