How to install a split squatting toilet? 10

How to install a split squatting toilet?

Check it out for yourself, quickly.

How to install a squatting toilet? How to install a squatting urinal

We have to use the squatting toilet every day, but when we buy the squatting toilet, we don't know how to install it, so how to install the squatting toilet? Let's share with you how to install the squatting toilet.

Before installing the squatting toilet, we must first prepare the tools to use, such as raw meal tape, glass glue, oil sludge, tape measure and level, etc.

Pisper installation steps:

1.According to the sewage outlet of the installed product, reserve the sewer pipe at the appropriate position from the wall, and determine the distance between the sewer pipe inlet and the ground level.

2.The depth of the pit reserved for the installation of the squatting toilet under the ground is greater than the height of the toilet.

3.Place the connecting rubber plug into the water inlet hole of the squatting toilet and clamp tightly. Apply a layer of glass glue or putty to the outer edge of the water inlet hole of the squatting toilet, and insert the water inlet pipe into the water inlet hole of the rubber plug so that it is well sealed with the rubber plug to prevent water leakage.

4.Apply a layer of glass glue or putty to the edge of the outlet of the squatting toilet, put it into the inlet of the sewer pipe and screw it together, and set the toilet level with coke residue or other filling.

5.Open the water inlet system and check each joint for water leakage, and if there is a water leak, check the condition of each joint. until the problem is resolved.

6.After checking that there is no water leakage at the joint of the old orange, fill the toilet around with filler, and fill the contact surface between the ceramic and cement mortar with elastic materials such as asphalt or linoleum of more than 1cm.

7.Use cement mortar to fix the squatting toilet in the horizontal plane, and after it is stable and firm, then pave the bathroom floor tiles on the cement surface.

8.Test flushing, if there is no abnormality, you can use it.

Precautions for installing a squatting toilet:

1.All parts of the squatting toilet that come into contact with concrete should be filled with elastic materials such as asphalt or linoleum, otherwise the toilet will break due to cement expansion.

2.When finishing with heat-dissolved asphalt, it is necessary to prevent the toilet from bursting due to heat.

3.The installation of the toilet should be operated in strict accordance with the instructions, otherwise the toilet will be broken.

4.The squatting toilet inlet flushing device mainly includes ball valve, high tank flushing, electromagnetic induction flushing valve, delay flushing valve, manual flushing valve, etc.

Piping Installation: Sizing the squatting toilet.

How to install the squatting toilet.

The size of the squatting toilet is a very important part, and the distance between the pit and the wall can be avoided by measuring the pit distance in advance, and the distance from the center of the squatting toilet inlet to the wall is at least 60 cm; The thickness of the squatting toilet should be at least 6 mm.

Second, squatting toilet installation.

Find the drain first, and then install the drain outlet reserved at the corresponding location.

Dig out the size of the squatting toilet that is larger than the height.

The next step is to place the connecting rubber plug into the water inlet hole of the squatting toilet and secure it. Apply glass glue to the edge of the water inlet hole of the squatting toilet, insert the water pipe, and seal it well to prevent water leakage.

Apply a layer of glass glue or putty to the edge of the outlet of the squatting toilet, screw it into the inlet of the sewer, and set the toilet level with coke residue or other filling.

Then check whether there is water leakage at each joint, and if there is water leakage, it is necessary to check the situation of each joint; If there is no water leakage, fill the area around the squatting toilet with filler, and fill the contact surface between the ceramic and the cement mortar with an elastic material such as asphalt of more than 1cm.

Fix the squatting toilet with cement mortar.

After it is fixed smoothly, lay the bathroom floor tiles on the cement surface.

Flush it to check if there is any abnormality, and if there is no abnormality, you can use it.

The installation method of the squatting toilet must first prepare the commonly used materials and tools, such as raw material belt, glass glue, oil sludge, tape measure and level, etc., and then you can start to install, the steps are as follows:

1. When installing the squatting toilet, the sewer pipe should be reserved at the appropriate position from the wall according to the sewage outlet of the installed squatting toilet, and the distance between the sewer pipe entrance and the ground level should also be determined.

2. When installing the squatting toilet, it is required to reserve the depth of the pit under the ground, and remember that the depth must be greater than the height of the squatting toilet for dry installation.

3. Put the connecting rubber plug into the water inlet hole of the squatting toilet and clamp it tightly, apply a layer of glass glue or putty on the outer edge of the contact with the water inlet hole of the squatting toilet, and insert the water inlet pipe into the water inlet hole of the rubber plug to make it well sealed with the rubber plug to prevent water leakage.

4. During installation, it is necessary to coat a layer of glass glue or putty on the edge of the outlet of the squatting toilet, put it into the inlet of the sewer pipe and screw it, and use coke slag or some other fillers to erect the squatting toilet horizontally.

5. After installation, open the water inlet system for testing, check whether there is water leakage outside each joint, if water leakage occurs, you need to carefully check the situation outside each joint until the problem is solved.

6. After checking that there is no water leakage, you can fill the area around the squatting toilet with filler, and at the same time fill the contact surface between the ceramic and the cement mortar with elastic materials such as asphalt or linoleum of more than 1cm. Use cement mortar to fix the squatting toilet in the dry horizontal surface, and the floor tiles can be paved on the cement surface after it is stable and firm. Try flushing again, if there is no abnormality, you can use it.