What should I do if the Meizu 5 automatically turns on, and then the card turns on again for half a

There are generally two situations:

1.Caused by unsuccessful firmware upgrade before the phone; If it is purely caused by a failed flash, Meimei recommends that you refresh the firmware, and check Clear data when upgrading.

2.If there is such a problem on your mobile phone suddenly, it is recommended that you connect your mobile phone to the computer, press and hold the power button after connecting, and turn off the mobile phone; In the case of making sure that the phone has enough power, press the power button and the volume + button to enter the upgrade meeting, check Clear data, click start, and the phone will automatically restart.

The machine is not good! It may not work to refurbish the machine.

If the mobile phone frequently freezes, restarts, or cannot be used normally during use, you can try the following methods: In order to avoid abnormal battery or heat dissipation, please avoid using the mobile phone in an environment where the temperature is too high or too low; Please confirm whether the phone has open root permissions, if so, it is recommended that you back up your data, re-update the system and select Clear Data to turn off the system permissions before trying; Please confirm whether this problem occurs after installing a software recently, uninstall the software, and all third-party software in your phone is recommended to be installed in the official app store**; Please uninstall the third-party management, security, and anti-virus software in your mobile phone; Please back up your data and update your phone to the latest stable version of the system. If the above exclusion scheme is invalid, or the mobile phone has been dropped recently, water ingress, etc., please back up the mobile phone data, exit Flyme, and send the mobile phone for repair and testing in time.

1. If the phone has been stuck in the "logo" interface after booting up, you can try to shut down again before restarting to see if it can enter the system interface normally after rebooting.

2. There is also a mobile phone when the phone is turned on can not enter the mobile phone system interface, at this time check whether the mobile phone shows the progress bar, if there is a progress bar, it is caused by the mobile phone system update, regardless of it waited a few minutes, when the system update progress is completed, it will automatically enter the mobile phone system.

3. If it is not for the above reasons, the boot interface is displayed all the time, then the phone may be dead, and you only need to force restart the phone to solve it.

4. If it still doesn't work, and there is no response on the boot interface for several minutes, then please try to charge it with a mobile phone cable or connect the mobile phone to the computer to see if it is normal.

5. After operating through the above methods, it is still displayed on the boot interface, then you can only wait for the phone to run out of power, and then recharge and restart to see if the problem is solved.

6. In addition, if the above operations are not effective, then you can only contact the after-sales maintenance inspection to see if the problem is the problem of internal hardware.

Press and hold the power button to restart the phone, press the power button and the volume button at the same time before the Meizu logo appears to enter the engineering mode, check Clear data and System upgrade, and start trying again. On August 8, 2018, Meizu released the more cost-effective flagship mobile phone Meizu 16, with first-class hardware configuration, excellent appearance design, and symmetrical full screen will bring you the ultimate experience.

Here are some things you can try:

1. Press and hold the volume up button + power button for 7 to 10 seconds, and after the phone enters the flashing interface, connect to the computer.

3. Don't check "Clear Data" first, just check "System Update", and press "Start" to see if you can enter the system.

4. If you still can't enter the system after the update, you need to do it again from the beginning and check "Clear Data".

Note: The operation of clearing data at the same time will clear personal information such as contacts, text messages, and notes, which must be backed up with flyme in advance to avoid data loss.

In this case, the system is generally unstable, and it is recommended that the user reflash the firmware of the mobile phone or flash other versions of the firmware, and check Clear data when flashing. Or press and hold the power button to restart, press the power button and the volume button at the same time before the Meizu logo appears, enter the engineering mode, and try again after clearing the data.

Solution: 2. Press and hold the power button and the volume plus button, and let go after the phone vibrates;

3. At this time, connect the mobile phone to the computer, a storage disk will be recognized, copy the firmware to the storage disk, click upgrade to use it normally.