The sink has a retaining edge, is it necessary to make it into an undercounter basin?

When decorating, the kitchen has the most things, and the sink and counter can be said to be the big head of the kitchen decoration. The installation of the kitchen sink is a key part. The installation method is divided into three ways: countertop basin, countertop basin and undercounter basin.

After using it, you know that the three are very different, especially in the later use, the advantages and disadvantages are becoming more and more obvious.

The installation of countertop basins is the most common installation method, even if it is a stainless steel sink, a granite sink or a ceramic sink that is not common in the country, it can be placed directly after punching. Silicone seals around it, and some products may need to be fastened with fasteners. The side of the sink is about 3 cm higher than the ground.

Easy to install. Just glue the glass directly on the sink and countertop. In the future, even if there is a problem, it will be repaired.

However, its disadvantage is that it is unhygienic, and the surrounding glass and rubber are also easy to mold and blacken, and the sink is warped in the later stage, and it is easy to leak into the cabinet along the gap. The lifespan is basically 3-5 years.

Moreover, the overall countertop of the basin under the counter is integrated into one, which is beautiful. The bowl is about 3 cm lower than the ground. Clean and tidy, the water stains and garbage on the table are wiped directly with a rag and then go to the sink.

Cleaning just got easier. The understage type is suitable for many stainless steel sinks, under stage sinks without ceilings and ordinary granite sinks, and ceramic sinks without ceilings. The additional charge is generally $200,500.

The installation is divided into fastener fixing and toban strengthened fixing, which is determined by the product and the supplier. Moreover, there is a certain degree of difficulty in processing, there are certain requirements for the strength of the counter, and there is a certain difficulty in cleaning the seams. If the construction is not completed, there is a danger that the sink will fall.

The gap between the sink and the platform is still hygienic and unclean. In addition, it is embedded under the counter, and it is almost impossible to replace the bowl inside in the later stage.

Now the most popular are countertop basins, sinks and countertop flats. Seamless installation with almost no dead spots and height differences. Visually more uniform and beautiful.

It has the advantage that the undercounter bowl is easy to hygienic, and if there is water on the counter, it can be cut directly into the sink. The flower pots on the table are also very sturdy, so you don't have to worry about falling off.

Since table-flat installation is rare in China, it is very difficult to process, so it is necessary to have an accurate cutting profile and the required depth, and the sink and table top are on a flat surface. There are almost no dead spots and drops second only to seamless setups; The visual unity is beautiful. The counter is also very easy to clean.

However, due to the high cost, the installation rate in the country is not high.

It is necessary to make an undercounter basin, because it will be particularly convenient in family life, and it will be more hygienic when cleaning.

Of course, it is necessary, because the undercounter basin is more beautiful and can make it easier to put away the garbage when cleaning the countertop.

There's no point in doing this anymore if there's no need, it's already good now, so there's no need to spend money on it.

It is necessary to make an undercounter basin again, because it is easy for us to splash water when washing vegetables or dishes. If you get a lot of water on the countertop, you can sweep the water directly into the countertop basin at this time, saving a lot of time in taking care of it.

There is no need, it is also very convenient to use in this way, and if you do it again, it may be very inconvenient to decorate.

The kitchen sink is the most frequently used area, and it is very important to choose a good sink when decorating. The sink under the sink is fully installed under the table. The edge of this sink is lower than the kitchen table.

Therefore, the garbage on the table can be wiped directly into the sink, and there is no sanitary dead end, which reduces housework. When the countertop basin is used for a long time, the glass glue will turn yellow and moldy, which seriously affects the appearance. The basin under the stage does not expose the glass glue, which will naturally be more beautiful.

The only drawback of undercounter basins is that they are not load-bearing. The load-bearing point on the basin is only near the location, and the load-bearing effect is far less than that of the stage basin and the central basin. This can be improved as long as it is reinforced during installation and lightweight materials are chosen.

The force on the countertop basin is more important than the force on the undercounter basin because the force on the countertop basin is relatively uniform, while the force on the undercounter basin is concentrated on the edge. If the material of the table is of poor quality, it is afraid of cracking. When installing a wash basin under the countertop, pay attention to the load-bearing of the countertop.

Many netizens who want to install a basin under the stage are worried about whether the basin under the stage will fall. This worry is a bit unnecessary. Although the pots on the stage have a good carrying capacity, there is not much difference, because the pots under the stage are generally handled by the cabinet merchant.

After the load-bearing of professional processes such as glass glue, table glue, quartz stone hooks, etc., there is basically no need to worry about the bearing capacity.

If you want to install a kitchen waste cleaner at home, and one device weighs about 10 kilograms, will the undercounter wash basin not be able to withstand it? Hanging a tin pimple over the years is a real challenge for the basin under the stage. More serious is the effect of motor vibration after starting.

If you are installing a waste disposal, it is best to equip it with a shock-absorbing base to secure and support the entire unit. You can spend 80 100 yuan to buy a base, which can extend the service life of the whole system. We don't have to worry too much about this carrying capacity.

It is recommended that you choose a countertop basin.

The kitchen sink is not used as a blanket basin because the undercounter basin is likely to leak from the gaps, and it is not convenient to clean in the process of future use.

I think it's mainly because undercounter basins are more prone to damage, so people generally make countertop dishes that last longer.

The main reason is that the undercounter basin is relatively easy to fall off, and if it falls off in the later stage, it will be very troublesome to repair.

In fact, it is relatively better to use the countertop basin, because the countertop basin is actually more convenient when he uses it. The countertop basin is installed by protruding the edge of the sink from the countertop, so such a way is actually a more common way in modern kitchens.

In fact, such a method is relatively simple to install, and the cost is relatively low, so as to ensure that a relatively large space flows out under the sinkComparatively speaking, the sink installed in this way is more convenient in the process of subsequent use.

If you want to maintain it in the future, you can directly bring it all out and then maintain it, but there is a disadvantage that he is actually troublesome when cleaning it up。Because if there are some stains in the sink, then it will be more troublesome if you want to clean it regularly, because you have to take it out completely, but such a sink actually has an advantage that is difficult to compare with the undercounter basin.

It is because it is actually more convenient to use, because it is relatively close to your location, and you don't need to use too much effort to reach the bottom of it, so such an item is actually more convenient in the process of use. The undercounter basin has a relatively big disadvantage, that is, it is very troublesome during installation, if the process of installation is not up to standard, then there may be water leakage and so on in the follow-up. It is also more troublesome to maintain, so relatively speaking, it is better to choose a countertop basin.

Which is the best choice for kitchen sink countertop basin, countertop basin, and countertop basin?

Kitchen sink, countertop, countertop or undercounter basin? Recommended by the conscience of the people who came over! Fitment; Huizhou decoration; renovation companies; Villa; villa decoration; Type; small apartment; interior design; decoration style; Decoration renderings; Toilet; Balcony; Living room; Bedchamber; Kitchen; New Chinese Style; Modern minimalism; Light luxury style.

It is better to install a countertop basin in the kitchen sink, so that dirt is not easy to accumulate in the gaps.

The advice given to me when decorating is to use a countertop basin, which is easy to take care of and not easy to accumulate residues.

I think it's better to have a countertop basin for the kitchen sink, so it's not easy to get dirty.

Personally, I think the kitchen sink is a countertop basin that is better and more convenient to use.

It depends on your preference for which kitchen sink to choose, and both are similar.

I think it's better to use a countertop basin, it's very convenient to use.

Of course, the kitchen sink is a countertop basin, and I use it myself.

Summary. Kiss, the countertop basin is good, easy to take care of, and the countertop basin bearing is better than the undercounter basin, mainly because the load bearing of the countertop basin is relatively uniform, and the undercounter basin is concentrated on the edge, if the quality of the countertop material is poor, I am afraid that cracks will appear, so the installation of the countertop basin should pay attention to the load-bearing of the countertop.

Kiss, the countertop basin is good, easy to take care of Shoubi, and the basin bearing on the Taihengqin file is better than the undercounter basin, mainly because the load bearing of the countertop basin is relatively uniform, and the force of the countertop basin is concentrated on the edge, if the quality of the countertop material is poor, I am afraid that there will be cracks, so the installation of the countertop basin should pay attention to the load-bearing of the countertop.

The difference between countertop basin and countertop basinThe difference between the so-called undercounter basin and the countertop basin is distinguished according to the installation method, and it can also be intuitively distinguished in appearance. To put it more professionally, the installation method of kitchen sink should be divided into semi-recessed countertop basins, countertop basins and undercounter basins. One:

The semi-recessed countertop basin is the water-filled part of the basin body to be embedded under the countertop, and only the edges around the basin surface are left above the countertop. The specific installation is to open an installation hole on the marble countertop that is 15 or 20mm less than the length and width of the sink, and then put the sink on the marble countertop. Two:

Taichung basin can also be called tabletop basin or tabletop flat basin. Cut off the grooves that are out of order or the thickness of the edge of the sink from the countertop, put it in the sink, then apply glass glue and set up the pendant. However, few people will use the Taichung basin, because the quartz stone is not easy to cut, and the process is complicated, basically it is impossible to cut out the groove that matches the basin well, whether it is horizontal or vertical.

It is not recommended because the seams are prone to bacterial growth. Three: If the edge of the basin under the counter is covered by the countertop, the entire basin is installed under the countertop.

After figuring out the difference between these methods, the points that everyone struggled with were mainly focused on the following two points: 1. The basin on the table is not easy to clean, but the random shooting is strong and easy to install and maintain; 2. The undercounter basin is easy to clean, but after a long time, you are worried about the load-bearing problem.

This is an undercounter basin, right?

Dear, yes, the basin on the countertop is a little higher.

It's better to install undercounter basins at home.

Kiss, disadvantages: If the imitation hole of the undercounter basin is broken, it is a large or legal separation of the Nianwu undercounter basin from the countertop, and can only be replaced together with the countertop. So from this point of view, it is better to have a countertop basin.

Sinks generally don't break down and can last for many years.

Kiss, that's okay, the water is not easy to flow out when washing dishes, it varies from person to person, you can get used to it.

Sinks are not easy to break, and quartz countertops are easy to break.

Dear, yes.

A lot of people have undercounter basins, right?

Kiss, at present, I have seen more pots on the table.

Countertop basins and their advantages and disadvantages.

Countertop washbasins are the default installation method for cabinets. Its mouth diameter is larger than the opening of the countertop, and it can be fixed directly on the countertop glass glue when installed, if it is broken, the glass glue can be removed, and it can be picked up directly from the countertop.

Advantages: The countertop basin is easy to install, and it is also convenient to repair after problems in the later stage; The space under the sink can be about 3 cm higher than the undercounter basin.

Disadvantages: The glass glue on the side of the sink is often in contact with the water source, and if it is not taken care of clearly, it will appear, blacken, and leak.

Undercounter basins and their advantages and disadvantages.

The undercounter basin is installed under the countertop, and the countertop and the inner edge of the sink are made holes of the same size, which are glued by glass glue.

Advantages: The undercounter basin is easy to take care of, the water on the countertop can be easily wiped into the basin, there is no need to worry about the water on the countertop, and it looks simple, beautiful and generous with the countertop.

Disadvantages: The installation process of the undercounter basin is more complex, and the cost of platform grinding is more; The gap between the sink and the platform is still a dead corner, which is easy to leave rice residue stains, etc., breeding bacteria, and is not easy to clean.

Countertop or undercounter washbasin?

Although most families still use countertop basins for kitchen decoration, we can see from the above that the advantages of undercounter basins are obvious in daily use

If you accidentally splash water on the countertop when washing vegetables and dishes, you can directly scrape the water into the sink by hand to avoid the water flowing to the ground or cabinet door panel in time; At the same time, the unwanted debris on the countertop can also be scraped to the sink and then cleaned out, which is very convenient.

On the contrary, if it is a countertop basin, not only does it not have this advantage, but also some kitchen countertops are smaller, and the cutting board and sink are relatively close, if there is water splashing out, it will be easy to soak the bottom of the cutting board, so it is best to use the undercounter basin design for sink installation.

Load-bearing problems of undercounter basins.

Undercounter basins are also of particular concern to the load-bearing problem. In general, the overmount basin is a little better than the undercounter basin, but considering that the sink basically doesn't put much stuff, there is no need to worry about the load-bearing problem.

Tips: Protective measures to prevent the fall of the undercounter basin:

Clause. 1. Use glass glue, but the firmness of glass glue is not enough, and it mainly plays a waterproof role.

Clause. Second, the countertop glue treatment process between the basin and the countertop, from the liquid coating, cooling and solidification, plays the role of bonding and positioning, and can not be broken by hand after sticking.

Third, the quartz stone strip in the shape of "7" is treated with a hook shape.

After doing this triple protection, it is usually bonded very firmly, and it is no problem to carry a weight of 100 pounds.