Briefly describe the relationship between the blade installation method of rotary tiller and agricul

It's more reassuring to search for relevant information on the Internet.

There are no special requirements for the installation of rotary tiller blades, if the blades are not installed correctly, it will not only affect the quality of the operation, but also affect the service life of the machine. The rotary tiller blade is installed as follows:

1. The left and right scimitars are staggered and symmetrically installed on the knife shaft, and the straight hook chisel blade has the advantages of strong soil penetration, poor soil throwing performance, and easy resistance to weed entanglement. It is suitable for areas with few weeds and compact soil. Its installation is generally arranged in a spiral line on the corrugated pattern and fixed to the tool holder with screws.

2. The two knives at the outer end of the cutter shaft are all bent inward, so that the soil blocks are not thrown to both sides, and there are long cutting edges, left and right curved blades, long blades, and cutter head curved edges, and strong cutting ability. It is suitable for both water and dryland agriculture and has a wide range of applications.

3. The installation of the rotary tiller blade is as follows.

Extended information: The rotary tiller is a tillage machine that is matched with a tractor to complete the ploughing and harrowing operations. It has been widely used because of its strong soil crushing ability and flat surface after ploughing. At the same time, it can chop the root stubble buried below the surface, which is convenient for the planter to operate and provide a good seed bed for later sowing.

According to the configuration of its rotary tiller shaft, it is divided into three categories: horizontal shaft type, vertical shaft type and oblique type, and the correct use and adjustment of the rotary tiller is very important to maintain its good technical condition and ensure the quality of farming.

The rotary tiller has the functions of breaking the bottom layer of the plow, restoring the structure of the soil tillage, improving the soil water storage and moisture conservation capacity, eliminating some weeds, reducing pests and diseases, leveling the land surface and improving the standard of agricultural mechanization.

Encyclopedia - rotary tiller.

data_title="Rotary tiller installation and work**"data_time="0:21:1"data_def="0"data_itemid=""

1. For the straight hook-shaped chisel knife, it has strong soil penetration, poor soil throwing performance, and is easy to block grass, which is suitable for soil with few weeds and compacted. Its installation is generally evenly arranged on the flute according to the spiral line, and fixed on the tool holder with screws.

2. For the left and right scimitars with curved blade heads and long cutting edges in the outer arc, the cutting ability is strong, and it is suitable for water and dry land farming, and has a wide range of applications.

There are generally three installation methods for the installation of rotary tiller blades, namely: inward bending and outer bending cross method (often used for flat ground), external rotation method (used for ditching, all blade bends outward), internal rotation method (used for ridge moisture, all blade bends inward). The details are as follows:

1. Outward-mounted: Except for the two knives at both ends of the knife shaft bent inward, the rest of the blades are facing outward, and a ditch appears in the middle after ploughing, which is suitable for dismantling furrow farming.

2. Loading inward: all blades are bent to the middle, and after ploughing, the middle is ridged, and a ditch appears between the adjacent two strokes. It is suitable for furrow tillage.

3. Mixed installation: left and right bend the knife.

Staggered and symmetrical mounting on the spindle, but the blades at both ends of the spindle are bent inward. After ploughing, the surface is leveled, which is the most commonly used installation method.

Precautions for the installation of rotary tiller blades.

In the process of installing the rotary tiller, first of all, it is necessary to ensure that the force of the knife shaft is uniform, so as not to affect the quality and safety of the operation due to the leakage and blockage, so the arrangement of the blades on the knife shaft needs to be done in the following points

1. When more than two blades are configured, the equal amount of soil cutting should be ensured to achieve good soil quality and flat bottom of the ditch after ploughing. In addition, the left and right bending edges should be staggered as far as possible to balance the forces on the bearings at both ends of the cutter shaft, generally according to the regular helix.

Rule installation. 2. In the process of the cutter shaft circulating for one cycle, at the same phase angle.

Down, there must be only one knife into the soil to ensure the stability of the work and the load is even. In addition, the farther the blade is on the knife shaft, the better, to avoid clogging.

You can choose the staggered installation method, the left and right scimitars on the rotary tiller are symmetrically installed on the knife shaft, the blade should be bent inward, not outward, and adjusted again after the installation is completed, so that the blade is kept in the same horizontal position.

After the rotary tiller is placed correctly, all the blades are bent and installed in the direction of the middle of the knife and bamboo, and the blades should be in the same horizontal position during the installation process, and the middle is hollowed out.

It can be installed externally, internally or mixed according to different work needs, as long as it is noted that the blades at both ends of the knife shaft should be symmetrical during installation to ensure that the land is flat after arranging the land.

How to arrange and install the blades of the rotary tiller! Hello, I am glad to answer your <> pro-rotary tiller blade arrangement and installation to the outside. Except for the two knives at both ends of the knife shaft bent inward, the rest of the blades are noisy and stupid outward, and a ditch appears in the middle after ploughing, which is suitable for dismantling and plowing.

Inside. All blades are bent towards the middle, and after ploughing, the middle is ridged, and a furrow appears between the two adjacent strokes. It is suitable for furrow tillage.

Hybrid installations. The left and right scimitars are staggered and symmetrically installed on the knife shaft, but the blades at both ends of the knife shaft are bent inward. After ploughing, the surface is leveled, which is the most commonly used installation method.

The blades at both ends are bent inwards and the rest outwards. Outward installation, inward installation, and mixed interior and exterior installation. Outwardly pressed, inwardly pressed, mixed pressed.

Hope mine can help you <>

Do you have any other questions?

Summary. Hello The installation method of the rotary tiller blade is as follows:1

Staggered installation method: the left and right scimitars are staggered and symmetrically installed on the knife shaft, and the two knives at the outer end of the knife shaft are all bent inward, so that the soil clods are not thrown to both sides, in order to facilitate the next ploughing, the ground is flat after the installation method is the most commonly used method. 2.

Interior installation method: The blades are bent towards the middle of the knife shaft, and there is a ridge in the middle after the installation method is tillage, which plays the role of filling the ditch. 3.

Exterior method: The outermost end of the blade is bent inward, and the blades are bent to both ends of the knife shaft from the middle. There is a ditch on the ground after the installation method is tillage, which is suitable for the combined operation of ditching.

Hello The installation method of the rotary tiller blade is as follows:1Staggered installation method:

The left and right silver bench scimitars are staggered and symmetrically installed on the knife shaft, and the two knives at the outer end of the knife shaft are all bent inward, so that the clods of soil are not thrown to both sides, in order to facilitate the next ploughing, the ground is leveled after the installation method is cultivated, and it is the most commonly used method. 2.Interior Method:

The first brigade of the blade is bent towards the middle of the knife shaft, and there is a ridge in the middle after the installation method is tillage, which plays the role of filling the ditch. 3.Exterior Method:

At the outermost end of the bend, the blades are bent to both ends of the shaft from the middle. There is a ditch on the ground after the installation method is tillage, which is suitable for the combined operation of ditching.

I don't understand the staggered installation method, can I send a ** to see, I am holding the side of the sixteen groups of eighteen knives of the twelve-horsepower rotary tiller.

Hello, there's no way to send it here.