How does the SRM 1000DX5 7 display case regulate the temperature?

Mine is also the same as yours, I want to ask too.

The picture should only be refrigerated, and the temperature can be adjusted according to set.

The method steps for adjusting the temperature of the display cabinet.

1. First of all, it is necessary to know that the number on the thermostat knob does not indicate a specific temperature value in the refrigerator, but rather a controlled temperature level. The lower the number, the higher the temperature inside the box. At room temperature, the first gear can be controlled at about 9 degrees Celsius and the seventh gear can be controlled at about 1 degree Celsius under standard temperature conditions.

2. Then, the adjustment of the knob position of the thermostat is usually based on the following principle. Under normal weather conditions, spring and autumn are in line with the standard, the gear is set to 2-4 gears, and the temperature in the box is 6-7 °C, which can meet the needs of daily home. Requirements for use.

3. Then, under the hot summer conditions, especially in the summer, when the ambient temperature is high, the gear position is set to 1-2 gears, and the compressor working cooling time can meet the requirements.

4. Then, in the cold winter conditions, according to the ambient temperature adjustment, set the gear at 5-7, where the ambient temperature is lower than 16 degrees Celsius and higher than 10 degrees Celsius to 5 gears; Below 10 degrees Celsius to 6-7 gears. The temperature inside the box can be refrigerated.

5. Then, this is a precautionary measure, adjust the temperature control gear to change the season to save energy, but if the temperature is too low in winter, the refrigerator room is easy to reach the set temperature.

6. Finally, due to the short start-up time of the refrigerator, the cooling of the freezer is not sufficient. Therefore, in order to save trouble, it was not possible to adjust the winter gear to 7th gear.

1. Identify the buttons.

There are generally 5 buttons on the thermostat of the display cabinet, namely: SET key, power key, upper key, lower key, and defrosting key.

set key: set key.

Power button: the power switch of the display cabinet; Down key, Up button: temperature setting button used in the settings menu;

Defrosting button: manually defrost the display cabinet, most of the display cabinets have automatic defrosting function, press this button to manually force defrosting.

2. Steps to set the temperature.

1) Plug it in.

2) Press and hold the SET button to enter the setting mode, and the temperature number on the display will jump from real-time temperature to set temperature.

3) Press the upper and lower buttons to adjust the set temperature, after setting, it will automatically exit the setting mode after 3 seconds, and the real-time temperature will be displayed.

I don't know what kind of display case you are. If it is vertical, there is an adjustment knob on the inside of the cabinet, or on the side. If it is horizontal, there is an adjustment knob under the outside of the cabinet. Clockwise rotation is low temperature, counterclockwise is heating up. You can take a look, there is a logo on it.

Hope it helps.

Have a great day.

Hello, the temperature control knob of the display cabinet refrigerator is generally appropriate, the higher the number, the lower the temperature in the freezer. Generally, we put it on 3 gears in spring and autumn, depending on your requirements, whether the freezer can reach below minus 18 degrees. In order to achieve the purpose of food preservation and power saving, we can hit 1 or 2 gear in summer, and 4 or 5 gear in winter.

The freezing temperature of the display cabinet is completed by the adjustment of the refrigeration thermostat and the matching of the system, if the ambient temperature is too low, the refrigeration temperature may be shut down for a few minutes, resulting in the freezing temperature can not be reached. Sometimes the ambient temperature is lower than the temperature inside the refrigerated area, and the display case will not be activated. Therefore, the display cabinet should not be used in ambient conditions below 5 degrees Celsius.

1. Winter temperature regulation.

In winter, the general stalls should be applied to more than 4 gears, the reason is: the refrigerated display cabinet has only one refrigerated room thermostat to control the temperature of refrigeration and freezing, because the refrigeration temperature technical requirements are controlled between 0 10 degrees, and generally in the winter the refrigeration environment is relatively low, refrigeration is easy to reach the set temperature, if the set temperature is too high, it is easy to produce a short start-up time of the supermarket cabinet, resulting in the refrigeration effect can not be achieved, and if the ambient temperature is low in winter, the main thing is to ensure the refrigeration effect of refrigeration. In general, if the ambient temperature is lower than 16 degrees, adjust to 5th gear, and lower than 10 degrees, you can adjust to 6th or 7th gear.

Sometimes because the ambient temperature is too low, such as 0 5 degrees, the gear is lowered to refrigerate frozen things, at this time, it is completely possible to store the food outside the supermarket cabinet.

2. The ambient temperature in winter should not be too low.

If the ambient temperature is too low, the refrigeration temperature may be shut down for a few minutes, resulting in the freezing temperature cannot be reached. Sometimes the ambient temperature is lower than the temperature inside the refrigeration, and the supermarket cabinet will not be activated. Therefore, supermarket cabinets should generally not be used under environmental conditions below 5 degrees.

3. Temperature regulation in summer.

During the use of the refrigerated cabinet, its working time and power consumption are greatly affected by the ambient temperature, so we need to choose different gears in different seasons.