I graduated from electronic technology and am now employed in the engineering management of a constr

One year after graduating from the bachelor's degree, he will be directly transferred to an assistant engineer, and he will need to be evaluated after three years of junior college; As for engineers, college degree or above can be evaluated after passing the computer and English exams [including other conditions] after 4 years after obtaining the assistant engineer.

The engineer exam organized by the state every year is an English or computer exam, which is a necessary condition, not a sufficient condition!

It is worth noting that the job title is common throughout the country! There is no such thing as not admitting it outside, unless it is a fraud!

In order not to mislead you, according to the actual situation in each place, it is recommended that you consult the talent service center, and I believe that you can get a satisfactory answer. At the same time, it doesn't really matter what you fill in the junior title, it is just a matter of level: that is to say, you are now older than the "member" and smaller than the "division".

Generally speaking, the salary of an assistant worker may not improve, and the acquisition of an engineer is a different matter.

Finally, congratulations!

The real job title is to be examined, and it takes three years to leave the junior college and one year for the undergraduate.

It's not just to fill in, you can take the exam as an assistant or directly as an engineer, then if you have a book, it is certified, where the salary is at least 5k or more.

The state organizes various engineer examinations every year, generally in June and July, and all provinces can apply, like the same procedure as the civil service examination, first register, pay money, and review the ruling examination.

You can check it on the Internet.

But no one outside will admit you! I don't know what you're talking about. It is the employment of the construction company's water supply, drainage and electrical management, where its own internal evaluation is not, then it is definitely not necessary.

Hehe, you have a lot of construction there, don't worry. But what I want to tell you is that although the architecture major is popular, it is not easy to enter the company, and people need academic qualifications and experience. Unless you have a relationship.

It's a threshold. Those who study architecture should understand that thousands of high-rise buildings rise from the ground! And you want to learn again, so first find a construction site and talk directly to the boss to be a technician partner, find a good technician master to take you, and then you must be diligent on the construction site, do a good job with each member, and the foreman, with the relationship between the workers, young people, a little diligence should be exercised, and long experience, although we are all graduates of the University of Architecture, but just graduated is not as much as a migrant worker's practical experience.

The premise is that the master who takes you wants to teach you and let him exercise, and some masters only let you be his partner to help him complete the work, and he doesn't call you or give you the opportunity to exercise] Don't think about how much money you make at the beginning, and you can learn the skills. I did a complete project well, and when I wanted to join the company, I had experience. Maybe you won't want to join the company at that time, and you want to do it yourself.

Now it's better to work on your own than to join the company, and the salary is high. Nobody cares! Good luck friends!

Fulin Group. Huaxi Group Sichuan Installation Company. That's all I know, and I hope it can help you.

The first item is the deficit Baibo network, the information on the mu is basically credible, I wish you good luck.

Good luck, I'm not going to copy it for you, go see for yourself!

The application of electronic technology major is mainly engaged in the production and organization management of electronic products for modern electronic product manufacturers (the introduction of new products of electronic products, the arrangement of trial production, production guidance, on-site abnormal problem handling, the improvement of production technology, the improvement of product performance and structure, the preparation of process instructions, etc.). Typical jobs are: PE (Production & Process Engineer) engineers.

The employment direction of electronic quality management technology is mainly for the modern high-tech electronics industry, engaged in electronic product design and development, manufacturing, quality inspection and control, quality inspection and shipment inspection of electronic product raw materials, etc. Typical jobs are: QE (Quality Engineer) engineers.

Some of the students who graduated from the direction are admitted to the master's degree to continue their studies, some go abroad to study for a master's degree, and other employment channels in the society mainly include: the development and design of network software, the research and development of network design, the design of electronic information products, the maintenance and management of communication networks, and the integration of information systems. After graduation, students can engage in the design, application development, and technology management of electronic equipment and information systems.

For example, as an electronic engineer, design and develop some electronic and communication devices; As a software engineer, design and develop various hardware-related software; As a project leader, planning some large systems, which requires a lot of experience and knowledge; You can also continue your studies to become a teacher, engage in scientific research, etc.

If you just come out with electronic technology, first, you can't develop it yourself;

Second, there is no experience;

Third, no company believes in its own capabilities.

Combined with the above characteristics, you can go to find a company that is doing the electronics industry (depending on your own preferences), as for the position you had better choose, testing, maintenance and the like.

Another option is the security industry, which is now in full bloom. (It has a wide range of fields, there are a combination of electronics and computers), like these companies you can choose the position of technical support.

Gu Xiu, it's up to you!! suitable for their future development.

According to the needs of the job.

According to your question, it seems that you should be a new student, and it is recommended that you find your own interests in this field or related fields, which is the key to future work.

The future work direction is very broad, not necessarily what to learn or do. It's about what to do and what to learn.

The most important ability is the ability to learn.

After graduating from engineering management, the most likely position for you to go to the construction company is a data clerk, the construction company is a little harder, go to the real estate company to choose a little more, you can go to the construction department to run the functional department, you can also go to the engineering department to be a data clerk, if your communication skills are good, you can also try to do sales.

To do the project cost, I have many female classmates who are doing this now, and now they are in full swing! It's enviable,

Real estate is better, I don't know about real estate, but construction companies are more tired.

I am also a major in engineering management, and I am working in a real estate development company, so I personally think that it is more promising.

It is recommended to go to a large construction company and learn some qualifications that cannot be learned from books. Real estate developers are now struggling to protect themselves.

After graduating from engineering management, you will enter a state-owned enterprise Iron Rice Bowl Private companies are promoted quickly Salary is not important You have to choose between the two Those who want work experience are recruited by the society Honesty is very important when you interview Girls are basically at the age of 30 is the beginning of their careers Whether you can earn money depends on your work.

Oh, in fact, when learning this major, you should pay more attention to the knowledge of civil engineering, it is best to learn and learn, when you graduate, you should go to the front line to learn and experience to master some of the most basic technologies, but start from a technician, hehe, this is a good direction, but some things vary from person to person, depending on the actual situation, I wish you a good job.

I'm a girl, studying engineering management, how about employment after graduation, and what about salary? : How is employment ......?This score situation; The salary depends on the specific work unit and position. (PS: It is more difficult for girls to find employment).

Look at the recruiting unit to have several years of work experience: you are going to the off-campus, and the unit that comes to the school will generally only ask about the internship experience.

Is it at least middle age to really earn a little money? : It should be said that there are many middle-aged certificates and make money!

If you are afraid of hitting a wall when you go to the company, and the hit rate is very low, you can go directly to the construction site and find the project manager or technical person in charge to recommend yourself, so the success rate is still very high. To study architecture, you need to have a drive!!

1. The design unit is responsible for architectural design.

2. The construction company is a construction that engages in real estate.

3. Design units and construction companies serve real estate.

Depending on your major, it is more suitable to enter a construction company.

If you feel that you are still good at architectural design, then it is best to go to a design company to do design.

If you go into real estate, you won't know anything, and it will be difficult to work.

I suggest that you start from the grassroots level, you must be young, and if you work hard to overcome difficulties, you will have a future in the future.

I recommend going to a construction company.

I think so, start a construction company first.

Forget about the design institute, don't enter.

If you have just graduated, you can run more to the construction site, develop in the direction of project manager and supervision, and don't sit in the office at the beginning.

Let's go to the construction unit to exercise first. Then go to a real estate company to develop and be a project manager or something.

If you go to the design unit, you will also be hit, the professionalism is too strong, you are not a graduate of architecture or civil engineering, or you can't do design in other majors.

Engineering management, especially construction project management, is a courageous choice as a career direction. As a project management category, this direction has unlimited prospects. It's just that it has to be honed over time.

It should be said that in the future, most of the outstanding construction project management personnel will be those who come out of the construction line and have been trained in various professional and technical work (from in-house to out-of-house). Project management is not possible without technical expertise and a thorough understanding of construction technology. However, not all of the many technical professionals can become project managers in the true sense of the word.

The current registered project manager should be considered as the representative of project management. However, there are not many real project managers in China, and many nominal project managers are the leaders of the company or the leaders of the department, or the technical personnel who only hold certificates and do not really participate in the project. The management of the project tends to be too macro and even vain.

The fundamental problem is the immaturity of the project contracting management system. At present, we cannot avoid the problem that many private (or individual) protagonists play the leading role in undertaking engineering business, and the corresponding engineering contracting company has become a private (or individual) dependence, so the company is often swayed by the will of individuals undertaking business in project management, resulting in the current general responsibilities, rights and interests of project managers cannot be unified. Putting aside "profit" for the time being, let's ask how to achieve "responsibility" without corresponding "power"!?

This is the most critical issue in engineering project management at present! ——It's not a problem of technology, management ability, or management system, but a problem of external system!

Of course, we don't have to choke on food. I believe that our market can solve this problem. Even in the developed countries of the West, the role of private undertaking of business cannot be avoided, and the key lies in the fact that the market system clarifies the responsibilities and rights of all parties.

The improvement of the industry and market system has prompted the project management to go in accordance with the standardized procedures, and the interests behind it have been well divided through the written and unwritten regulations of the market, so that the project management has embarked on a professional track and is far away from the impact of personal will on the management work itself.

As those of us who aspire to work in this industry, what we must do is to lay a good foundation and go through the hard work of each specific job – starting with the technical work. This will then be followed by the honing of more challenging management skills. (Construction technology cannot cover many aspects such as personnel, cost, market, contract, etc.).

Management skills cannot be learned directly from general colleges and universities or training courses such as X BA and XMP (those courses are the summary and sublimation of practice, and do not participate without a practical foundation), only from real projects step by step.

Construction management is all-encompassing, with a wide range of learnings that extend beyond the building itself, and the skills required can be implemented in many fields. Therefore, the prospects for this employment direction are limitless.

I'm also that professional, and it feels good, hehe

It should not be easy to get into the management of the design unit, but the treatment is the best, and now you can choose real estate, and the benefits are also very good.