I have two routers installed in my house, and one of them suddenly gets stuck at night

1. The most common situation is the problem of the router, if the indicator light of the router shows that there is no problem, then you can restart the router to try, there is a restart button on the back of the router, and you can press and hold it for a few seconds to make the first noise.

<>3. In addition, there is a possibility that our network has been rubbed by someone, and this possibility is also relatively large, because there are many cracked software now, how to detect whether it is rubbed on the network? Also find the same option in the router** and "Device Management" or similar.

4. Then you can see the number of devices currently connected to the network and the name of the waiter, if there is an unfamiliar device, it is undoubtedly rubbing the network, and then the password will be changed.

5. However, sometimes these have been checked, and there is still a problem, then it is very likely that it is a problem on the operator's side, and you can call the operator corresponding to the network, and a special maintenance personnel will generally be arranged to come to troubleshoot the problem.

Summary. Hello, there is a possibility that there is other wifi interference near the night. You can try to fix the channel to 1 or 11 in the router settings, because the default for automatic channels is usually 6.

The router at home is very stuck after 12 or 1 o'clock in the evening, and it is always unconnected, and it always drops.

Hello, your question has been received, I am inquiring for you, it is expected to take 5 minutes, please wait a while, I will reply to you immediately.

Hello, there is a possibility that there is other wifi interference near the night. You can try to fix the channel to 1 or 11 in the router settings, because the default for automatic channels is usually 6. There's also the possibility that your wifi has been stolen by someone before 12pm**.

You can log in to the router to view this. Change your WiFi password regularly.

I hope the above is helpful to you If you are satisfied with me, please give me a thumbs up Your efforts are important to me.

Wishing you good health and a happy mood. <>

Is your second router connected to the first router with a network cable or wirelessly bridged to the first router?

In fact, you can check, if the network cable is connected to the first router to do the upper and lower level routing, then you check whether the LAN port of the first router will be lost, and then make sure that the connected network cable has no packet loss;

If it is a wireless bridging, then you see that the two routes are far from each other, and there are many partition walls, which affect the signal, and then the bridging parameters are set.

And then you say the second router card, is it the phone connection or the computer connection the second router? You need to check if the signal coming out of the second router is okay.

For example, if you have the first route A, the CIDR block is, and the second route B CIDR block is, you can use the ping command to see if there is any packet loss.

If the basic line lasts for 1ms and does not exceed 10ms, it is easy to find the problem step by step.

If the router is used for a long time, the computer network will become very stuck. Reset the router and the network will become normal and fast.

After resetting the router, you need to reset the broadband account and password, as well as the wireless wifi password.

There are two reasons for this:

1. The user settings are incorrect.

2. Broadband operator issues.

1. Determine the reason for not being able to access the Internet.

1. Please remove the router first, and let the computer directly connect to the moden, optical modem or home network cable.

2. Then dial in with "broadband connection" on the computer to see if you can access the Internet normally.

3. If the computer can access the Internet, it means that the router cannot access the Internet due to the user's setting problem; If the computer is not able to access the Internet at this time, it is a problem with the broadband operator.

Resolution]:

1. Solution to user setting problems.

1. Set the IP address of the computer correctly, the computer needs to be connected to the router to go online, and the IP address needs to be set to automatically obtain (dynamic IP).

2. Install the router correctly.

1) **Online networking: You need to prepare 2 short network cables, one network cable is used to connect the WAN interface of the router and ADSL modem (cat); Another network cable is used to connect any of the LAN (1, 2, 3, 4) ports on the router to the computer used for setup.

2) Optical brazing Internet access: Please prepare 2 network cables, one network cable to connect the WAN interface of the router and the optical modem; The other network cable is used to connect any LAN (1, 2, 3, 4) port on the router to the network cable interface on the computer.

3) Network cable home Internet access: Please prepare 1 network cable, and plug the home network cable provided by the broadband operator into the WAN interface of the router; Then connect the network cable you have prepared, one end to the computer, and the other end to any LAN (1 2 3 4) port on the router.

Summary: That is, the WAN interface of the router can only be used to connect to the moden, optical modem, or home network cable; PCs can only connect to any of , not to the WAN.

3. Set up the router correctly to surf the Internet.

Android, iPhone, how to delete the number of contacts in batches.

Method steps.

The first and most direct is to check whether the router has been rubbed into the network, you can open the browser to enter, and then press enter, and then enter the user of your router, as well as the password to log in, check whether there is an unfamiliar device in the corresponding menu, and the IP is inconsistent with the hardware pair, and it will be rubbed on the network.

Let the router speed modulation be maximized, the router is set to 75% rate at the factory, and you can enter the security setting to maximize the rate modulation of the router.

Manually use the can to expand the signal range of the router by yourself, just use a knife to cut the middle of the can, make a hole at the bottom, and put it on the antenna of the router.

Keep your router away from disturbing items, such as microwave ovens.

The location of the router is not very good, such as the corner of the wall and the dense place of the object, which is the root cause of the signal quality.

When we are not on the Internet, we should turn off the modem, because if it is turned on for a long time, the temperature of the internal components will be high, which will affect the network transmission.

The router card is best to go to the network operator first, tell them the network card, and then let them restart the system over there, turn off the router for more than ten minutes before starting, if it is still the same, just ** some detection network, see if there is? Someone else steals the connection, if these are removed, it may be that the router has a problem and is broken, it is better to take a new one, or there is a router that can be tested, to see if the router is broken?

You can see if it is caused by many people connecting, you can turn off the router first, and try it when you turn it on. If it really doesn't work, you can call the operator and ask the reason.

Is your router stuck? It means that the router you have installed in your home is no longer good and needs to be replaced.

If it's stuck, it's your network that has me.