Can I change the finished countertop due to the small hole in the sink?

Theoretically, the answer is clear and can be changed!

It is more difficult to change the hole to the small hole, and it is relatively easy to change the hole to the big hole when the hole is small.

The commonly used cabinet countertops are basically stone and artificial stone.

and natural stone, there are also parts of stainless steel. The sink generally has a buckle edge, and the buckle edge size is about two centimeters larger than the opening size, so it doesn't matter if the opening size has an error of one or two centimeters, the requirements for the empty opening are relatively low, and even the size is not accurate, and the hole can be opened in advance.

If the hole in the prepared cabinet is small in advance, it is easy to cut it into the right size with a small cutting machine or trimming machine on the spot, and there is no need to be entangled. If the hole opened in advance is large, it will be more troublesome. It is necessary to fill the hole, there will be traces when it is repaired, which will affect the appearance, and the effect is high, and the cost of replacing the countertop at the opening is slightly expensive.

But it can also be replaced.

If the subject wants to get an accurate answer, he should describe the question more accurately. It is best to match **, we will better help you, for the small size of the cabinet opening, it is no problem to change to the big one. The on-site situation is also more complicated, and some sites may encounter obstacles such as pipeline switches, so you have to find another way.

1. It is relatively simple to solve this kind of problem, and you only need to ask a professional master to come to help ream. Of course, some people have custom cabinets in their homes, so you can ask the cabinet installation staff to come to your door and enlarge the holes in the countertop to the right size.

2. You need to use an electric drill, but it is best to measure the pipe size of the gas stove before, and open the hole according to the size of the pipe, generally speaking, the opening size of the stove is 590 mm 353 mm, of course, there are some smaller ones that are 371 mm and 681 mm.

3. If it is a customized cabinet, before opening the hole, the stove should be purchased first, and then the size should be determined, and then the hole can be opened, which can effectively avoid the problem of too large or too small hole.

4. If you encounter a large opening in the stove of the gas stove, you can cut a few marbles, cut it into long strips, and then glue it to glue it, which can make the opening smaller. Or it is a good idea to choose a stone of the same color, break it, stick it with glue, wait until it is completely cured, and then re-polish it.

5. Another way is to directly purchase the tray of the gas stove, fix the stove on the tray, and then install the tray on the stove to solve the problem, without opening holes.

As we all know, the sink is an essential piece of hardware in the kitchen renovation process. So the question is, can the sink hole be changed if it is smaller? What problems should be paid attention to in the opening of the bright groove of the water bucket?

The sink hole can be changed if it is smaller, and the method is very simple, you need to find an ordinary decorator to change it, because they will bring handy tools, usually less than an hour to complete.

What problems should be paid attention to in the opening of the sink.

1. First of all, you need to use a hole opener to open holes at the four corners of the sink, and then use a gong machine to open holes along the line;

2. Next, mill out the corresponding shape according to the drawing;

3. Clarify the size of the sink and the digging hole (including the arc of the four corners of the sink hole);

4. According to the drawing, clarify the middle part of the sink, and use the template to locate or draw the opening line according to the size;

5. Punch glass glue on the edge of the sink, and install the sink in alignment with the opening hole, and at the same time, the residual glass glue should be cleaned and the glue should be cured;

6. Finally, hit glass glue on the lower edge of the sink hole, put the sink into the hole, glue the reinforcement block, and then reinforce it with AB glue, and wait for the glue to cure, just put on the sealant.

Whether to choose a double basin or a single basin for the sink.

Advantages of a single basin sink:

1.Large space capacity: A single tank has a certain amount of space, especially a large single basin, and the water is not easy to splash during use.

2.Small footprint: If the kitchen is empty, the accumulation of wax is limited, and a single basin sink is the best choice.

3.Simple sewer structure: single basin, only one sewer outlet, so the structure is simple when loading pipes, and it is convenient and durable.

Double basin sink advantages:

Cleaning independent partition: clear division of labor in cleaning, clean and hygienic.

Water-saving and easy to clean: The overall capacity is large, which is more convenient than a single basin and more water-saving.

Summary: After reading the above introduction, I believe you have a further understanding of whether the sink hole can be changed if it is smaller. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.