There are 3 ways to install the sink in the upper, middle and lower, which is more practical and rec

You can control the big problems in the renovation of your new home, but selling a sink is just running into the hardware store and buying one, but there are really so many categories to choose from, which drives us crazy. Hardware stores will always give us some strong recommendations, there are sinks installed from top to bottom, but what are the advantages and disadvantages of these? We don't particularly know that we will regret it after buying it home and applying.

If you start using all three, you know which one is good, but it varies widely. In the future state of use, you can know their advantages and disadvantages.

First of all, the undercounter basin will be assembled at a relative height of 3 cm higher than the countertop. Easy to assemble, that is, to connect the countertop with structural adhesive to the sink, even if there is a problem later, it is also convenient for maintenance. The design scheme of this basin will make the surrounding sanitation and cleaning particularly inconvenient, and it is designed with structural adhesive to make him bonded, often used will have mildew or blackening, and the sink will also have the problem of warping feet in the later stage, and the water will be along the gap kitchen cabinet, so that its life may be about 3 years.

This is also a design that many people are willing to do, it will better integrate with the countertop, and this state will have a more beautiful practical effect. The basin needs to be 3 cm smaller than the countertop, which will make its environment more convenient and tidy. If there are problems such as water marks on the countertop, scrubbing with a rag will be clean and tidy, and it will be easier to clean.

A basin is an installation method that is the same height as the countertop. This kind of interior decoration has almost no gaps, and it will not let the home have blind spots and ups and downs of environmental hygiene, so that its overall design scheme will visually bring us a more beautiful practical effect. This design not only has the advantages of undercounter basin hygiene, but the water on the countertop will also enter the sink well, and the undercounter basin will also have a solid sturdiness, so that we don't have to worry about falling off after a long time.

Only the installation method of Taichung basin is relatively rare in China, and the surrounding countertop must be diluted, which will increase the difficulty of the entire production process. Only the design of the basin can make our use more comfortable, among the three ways of interior decoration, its application is the best, and home decoration can choose this method of design of the basin. Many people will be entangled in choosing the assembly method of the pot, now know the function of each pot, in the selection condition must choose the way of the pot, which will make the overall application stronger, and will also make the interior space more beautiful.

There are 3 ways to install the sink in the upper, middle and lower, which is more practical and recommended to be installed? The Taichung basin is good-looking and easy to use, easier to take care of than the stage, and more stable than the table. The installation method of the basin can also be called "flush flush", with the edge flush with the countertop.

Countertop washbasins are the default installation method for cabinets. Its mouth diameter is larger than the opening of the counter top, and it can be fixed directly on the countertop glass glue when installed.

Personally, I think the undercounter basin is the most convenient, and the undercounter sink is the best sink style I have ever used. Its installation difficulty is between the countertop type and the Taizhong style, which is to dig a hole in the countertop and then glue the sink to the bottom of the countertop. The most common installation problem is that the bond is not strong, resulting in the sink falling off, this problem must be paid attention to!

I think it should be installed with an undercounter basin, which is particularly convenient to use and very practical.

Tabletop mounting

Countertop is the most common installation method, whether it is a stainless steel sink, a granite sink or a ceramic sink that is rare in China. You can directly put the slag on the slag after opening the hole, and seal it with silicone around it.

Advantages: The cabinet dealer will not charge extra, the construction difficulty is the lowest, and the countertop material is not selected.

Disadvantages: Sinks and countertops are not easy to clean, and silicone may leak through the gap after aging and damage, but it still exists as the default installation method.

Undercounter mounting

Undercounter installation is also used a lot, especially if you choose a manual stainless steel sink, then it is basically the default installation mode. Such as skin lifting.

The overall appearance and countertop are also more integrated, simple, beautiful, and generous.

Compared with countertop basins, the installation process requires an additional charge, generally 200 500 yuan.

Advantages: Smaller than the countertop, for the cleaning of the countertop, visually more beautiful.

Disadvantages: There is a certain degree of difficulty in processing, there is a certain requirement for the strength of the countertop, and the seams will have a certain degree of difficulty in cleaning, especially the trapezoidal installation and additional charging.

Table-flat installation

Countertops are installed in China, which is relatively rare because of the high difficulty of processing, the need for precise milling of contours, and the need for a depth of , sink and countertop on the plane.

Foreign grip laminate plate countertops often appear, if you have this preference, you can negotiate with the first business. The cost may not be less than.

The integration of the table flat installation is second only to the seamless installation, with almost no dead spots and drops, and a high degree of visual uniformity is achieved. Hopefully, this approach can be followed in China.

Pros: differences, very small clearances, very easy to clean the countertop, visual blending comfort.

Disadvantages: It is very difficult to deal with, requires additional charging, and cannot be installed in the mainstream for the time being.

Flush flat installation

Flush mounting is also a type of undermount installation, where different table thicknesses are almost weakened, and are commonly found on laminated countertops.

Installing an undercounter sink is a little more troublesome than an overcounter sink, and the following is a comparison between my countertop sink and an undercounter sink to illustrate the advantages of an undercounter sink.

In fact, it is difficult to say that it must be good on stage or off stage, each has its own advantages and disadvantages, depending on personal preference, after all, it will not affect the use of the stage or offstage.

On the platform, it is easy to install and less difficult to constructAs long as the opening of the countertop is not larger than the projection line of the cornice of the basin, put it down directly, the glue can be fixed, and if you want to change the pot, as long as the size of the opening is no problem, it can be done almost immediately; The disadvantage is also obvious, because the cornice is higher than the countertop, so the water (or small garbage) on the countertop cannot be wiped into the basin casually. In addition, the glue is aging or falling off or partially falling off, and the water on the countertop is easy to enter the cabinet.

The disadvantages of on-stage installation are all advantages when installed off-stage。The advantages of on-stage installation are the disadvantages of off-stage installation (or shortcomings and difficulties). The installation is inconvenient, the construction is difficult, and the process requirements are relatively high, such as the countertop opening needs to be regular and straight, the edging should be beautiful, the correspondence between the countertop opening and the basin should be symmetrical, and the size of the edge or flattening should be consistent all around.

There are still differences in the construction process of different countertop materials (artificial stone, quartz stone) for undercounter installation。If the countertop is installed, the lower part of the countertop must have the base of the whole board, and the top installation is that many manufacturers use strip boards as the base layer. For some pots with higher thickness, the countertop or base plate also needs to be thickened when installed under the counter.

And if you want to change the pot, it is basically impossible, and the countertop has to be removed.

I've also done semi-recessed sinksIt can basically solve the shortcomings or problems of most of the on-stage and off-stage installation, and can also retain most of the advantages of on-stage and off-stage installation.

In fact, countertop installation, undercounter installation or semi-recessed installation all depend on the user's personal preferences and habits.

Of course, it's very troublesome, the biggest trouble of the first point is that it is very expensive to install, the biggest advantage of the second point is actually that it can be launched quickly, the effect is very good, and the biggest advantage of the third point is that it will not be easily blocked, which is the best advantage.

It is not troublesome, the advantage of the sink undercounter basin is that it is beautiful, it will not cause the cabinet countertop to give people a uneven feeling due to the protruding part, it is easy to clean and hygienic, and the water on the countertop can flow smoothly into the basin without accumulating bacteria.

It's going to be a bit more troublesome. Pros:1The overall look is integrated with the countertop, which looks simple, beautiful and generous. 2.It is convenient to clean up countertop garbage and running water. Hygienic and easy to take care of.

Advantages: Countertop basins are easy to install, disassemble and maintain, so many families will use countertop basins. Disadvantages: The junction between the basin and the countertop is easy to warp, and the basin with not very good quality may be more serious.

The installation of the undercounter sink is much more troublesome than the installation of the upper sink, the installation is inconvenient, and the construction is difficult, but the installation of the undercounter sink has some advantages: 1. The overall appearance is integrated with the countertop; 2. Concise, beautiful and generous; 3. It is convenient to clean up the garbage and running water on the countertop.

Undercounter basin installation.

With the undercounter basin installation method, the sink is installed under the countertop, which has more space and the countertop is easy to clean and maintain. However, the joint between the basin and the countertop is more likely to trap dirt and dirt.

No opening is required for installation.

The sink is easier to install without a hole and has a number of features, such as a style that can be mounted at the corner to make the most of space.

Generally, after the sink is bought at home, the worker will cut the countertop of the cabinet according to the size of the sink, and after putting it into the countertop, it is necessary to install the matching hanging piece between the trough and the countertop. The sink should be installed firmly, and the tank body should not be swayed from side to side. The installation of the sink is not a big project in the whole decoration, but try to pay more attention to the tightness of the connection during the installation process.

After installation, a drainage test is carried out, the sink is filled with water, and the drainage of the drain and overflow hole is tested at the same time. If it is found that there is water seepage during drainage, it should be reworked immediately. After the drain test, to make sure that there are no problems, the edge of the sink can be banded.

When using silicone edge banding, it is necessary to ensure that the connection gap between the sink and the table top is uniform, and there can be no water seepage.

The characteristics of the artificial stone sink are that it can be made according to the needs of the overall style of the kitchen sink is very good, the pattern is rich, compared with the metallic stainless steel, the artificial stone sink is more soft, and the artificial stone sink has a strong plastic ability, so that the material between the sink and the countertop can be identified 304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties, is a food-grade stainless steel, the current big brands are basically using this material. The workmanship should be confirmed whether it is integrally molded, which is more durable and durable.

<> what kind of process is used on the surface of the sink is closely related to **, drawing, polishing, pearl silver, etc. are different. The sink made by the polishing process is relatively less wear-resistant; Brushed products perform much better in this regard. The pearl silver sink looks like the manual groove has only become popular in recent years, because the manual groove is manually welded, so it is relatively high, and the appearance is more personalized and beautiful.

The integrated tank has been around for many years, and the production process and technology have been perfected, and the key is the assembly line.

You should know that the sink in the kitchen is the focus of cleaning at home, if you don't clean it up in time, there will be a peculiar smell when the weather is hot, and the gap will even be moldy and black. But the lifting sink will rise up flush with the countertop every time it is used, and the owner only needs to wipe it with a rag In the interior decoration design, the material that is said to be the most beautiful in the stone must be marble. The delicate and smooth appearance and natural and unique pattern are definitely the first choice for stylish sink materials.

However, marble is beautiful in terms of maintenance.

This is due to the fact that kitchen sinks are installed in our countertops, so if they are not the right size, they may not be able to be installed. For example, the most standard sink size is generally 500 in depth. Then there are various sizes in length.

The disadvantage is that it is not very convenient to take care of in the later use, the position of the contact between the sink side and the countertop is closed by glass glue, if the hygiene is not maintained well, the glass glue is easy to mold and turn black after a long time, the sink is warped, and the water leaks into the cabinet along the gap.

There are several types of kitchen sinks, so according to the size of the kitchen, if your kitchen is small, it is recommended that you install a single sink, if your kitchen is large enough, you can press a sink, and there can be a trash can next to the better.

If you say that the sink is a little larger, then you can buy some tools to borrow it when installing, if it is smaller, then you can install it directly, and some of the automatic styles are very good.

Because there are many types of sinks in many kitchens nowadays, there are different types, and we have to choose according to the type we like and the style of our own kitchen.

1.Install the inlet pipe of the faucet. Connect one end of the water inlet pipe pre-installed on the faucet to the water inlet switch.

When installing, pay attention to the firmness of the connection. At the same time, it is necessary to pay attention to one detail, which is the location of the hot and cold water pipes. Don't be wrong left or right.

The overflow hole of the sewer pipe installed with the overflow hole is a protective hole to avoid water from spilling out of the sink. Therefore, when installing the sewer pipe with overflow hole, it is necessary to pay attention to the tightness of the connection between the sewer pipe and the tank body to ensure that the sewer pipe of the overflow hole does not leak.

2.When installing the sewer pipe under the filter basket, pay attention to the connection between the sewer pipe and the tank, which should not only be firm, but also sealed. It is common to buy a tank with two filter baskets for the entire drain, but the distance between the two drains can be close or far.

During installation, workers will cut the matching drainage pipe according to the actual situation. At this time, it is necessary to pay attention to the tightness between the joints. Install the hanger to reinforce the tank.

After the tank is placed on the countertop, it is necessary to install a matching pendant between the tank and the countertop to install the tank firmly and prevent the tank from swinging left and right due to small gaps.

3.The countertop basin sink device is relatively simple, just make a hole in the table according to the installation drawing, then put the basin into the hole and fill the gap with glass glue. When used, the water on the table does not degrade along the gaps, so it is widely used in households.

When installing this type of kitchen sink, choose the method of installing the sink under the counter. The sink is installed under the counter for more space to use, and the counter is easy to clean and manage. However, the connection between the basin and the countertop is more likely to trap dirt and dirt, and needs regular maintenance and cleaning.

4.Before installing the sink device, we must first determine the orientation and scale of the device, so that it is convenient for us to order according to the scale, and it is best to have a floor plan of the sink to avoid data inaccuracies and rework. In addition, when the sink is sturdy, do not sway it from side to side, and simply leave a gap to loosen it.

And, the most important thing to pay attention to is the tightness of the joints. Maybe many people buy double cylinders because they can be divided into regions, and they can't accept a pot that is not cooked and greasy. Then you can buy a drain rack, which can be divided into an oily area or a clean water area.

One side is used to wash greasy pots and pans, and the other half is used to wash fruits and vegetables. You can put it away when not in use.