What is a tune in and fishing eye? How to tune how to fish

Anglers who come to the forum basically know the mesh and the fishing mesh-the color grid used to see the signal is the "mesh", and the mezzanine is to adjust the size of the lead skin to make the float reach the grid you want. Fishing, on the other hand, is by adjusting the position of the float, that is.

The so-called adjustment of the length of the waterline (simply understood as the short line of the underwater line) is to make the float reach the level you envision. We set.

The purpose of the mesh adjustment and fishing is to allow the whole line set to achieve the sensitivity and sluggishness we need in the water. Anglers often ask: "Are you tuned?"

How many eyes of fishing? ”

In fact, even if the master tells you, your rig may not be in the same condition in the water as others. Because the float you use may.

There is a big difference, and the difference between the same tune and fishing mesh can be quite large.

There is the possibility of water absorption, and only after its water absorption is saturated can the stability of buoyancy be achieved, one of them. What is your posture when adjusting the eye.

Maintain a consistent posture, because there is still traction from rod to line when pressing water, and there is also some traction from line to float.

size, specific gravity and atomization state, as well as the size of the hook pitch and the hardness of the strands. Hard strands and thick strands can make the line like.

The pillar is like a pendant, so that the signal characteristics of the float and the state of the hook group can be changed unexpectedly.

Understand the relationship between the purpose of adjusting the eye and the purpose of fishing, and the drifting is naturally much simpler!

The adjustment is to adjust the size of the lead skin to make the float reach the level you want. Fishing is done by adjusting the position of the float, which is the so-called adjustment of the length of the water line (simply understood as the length of the line with the water and the bottom line of the macro sakura), so that the float reaches the desired level. The purpose of setting the mesh and fishing mesh is to allow the entire set of lines to achieve the desired sensitivity and sluggishness in the water.

The main consideration is the bait weight, the bait weight is higher, and the bait is lighter. The fishing target is mainly considered according to the fish condition, and the fishing target is adjusted considering the state of the double bait at the bottom of the water. Basically, there are three kinds of relationships between the tuning and the fishing, the tuning is higher than the fishing, the tuning is lower than the fishing, and the tuning is equal to the fishing.

Techniques for adjusting the eye

The purpose of adjustment may be an empty hook, or it may be with bait (with double bait or with single bait), or without a subline, and these three situations are the same. Take the empty hook as an example, if the empty hook is drifting in half water, and the fishing eye is higher than the adjusting eye, the bait must be in the end, and the line is curved.

I use it when it is light.

After determining the mesh, the final fishing target is larger than the mesh, and the bait is also in the end. Fishing mesh is higher than the tuning eye, but also the sound is commonly said to lower the fishing height, usually in the use of light bait fishing bottom, or carp fishing is often used, the first is to ensure that the bush to the end, followed by a little pause, conducive to grasping the solid mouth.

There is a formula for drifting: fishing mesh = mesh adjustment - double bait weight, this formula explains a few points, in the state of half water hanging empty ambush double bait, this mesh is the most intelligent fishing mesh. If you want to determine whether the bait is in the end, it must be greater than this mesh.

For example, the empty hook is half water to adjust 4 mesh, and there are 2 meshes floating after hanging double bait, if you want to fish the bottom, the fishing mesh must be at least greater than or equal to 2 mesh, but generally speaking, fishing 3 mesh is safer; If you have heavy bait, but you want to fish a little bit, you must adjust the height of the eye; If you want to fish low mesh, you need to consider the bait weight before determining the mesh, so it is said that the bait weight affects the mesh.

According to the above assumptions, fishing for 2 mesh is the most effective, and fishing for more than 2 mesh can ensure that the bait has reached the bottom. Finding the bottom does not mean that you can catch a fish, there will definitely be a process of adjusting the dullness, and this process is the process of finding the mouth. For example, when fishing, the drifting phase is clear and obvious, but the rod often does not hit the fish, which means that the fishing spirit is good, and the fishing target is increased to be blunt, until there is a high rate of fishing.

In the end, we can only find out that the hit rate is good when we fish for 3 mesh, so the fish mouth determines the fishing target. When we adjust the drift, we just assume a catch, and on this basis, adjust according to the fish conditions. The drift can be adjusted to the four hall calendar fishing two, and when the fish is on the fish, it may be to adjust the four fishing three.

The relationship between the mesh and the fishing ** is as follows:

First, the hand before the eye, fishing, bait weight.

There is a formula for drifting: fishing mesh = mesh adjustment - double bait weight, this formula explains a few points, hanging double bait in a semi-water state, this mesh is the most intelligent fishing mesh. If you want to determine whether the bait is in the end, it must be greater than this mesh.

For example, the empty hook is half water to adjust 4 mesh, and there are 2 meshes after hanging double baits, if the potato stuff wants to fish the bottom, the fishing mesh is at least greater than or equal to 2 meshes.

Second, the difference between the adjustment of the eye and the fishing eye.

There's a difference between the mere and the fishing, and it's actually very interesting. If the float has been adjusted, the larger the value of the eye-fishing, the more intelligent the fishing, and the smaller or even negative the value (lower the target and the higher the target), the duller it will be. In fact, this difference has a lot of influence on the drift adjustment method, and can even measure the sensitivity of the float itself.

There are roughly three kinds of relationship between the fishing eye and the tuning eye, either the fishing eye is higher than the tuning eye, or the fishing eye is lower than the tuning eye, or the fishing target is equal to the tuning eye.

Adjusting the eyes and fishing eyes, that is, the often said to adjust the eyes and fishing the eyes. Adjusting the eye is to the water's edge to find the bottom, Zhou Xiang and then hang the bait or empty hook, there is a number in mind, how many eyes are adjusted today, first of all, the number of cavity tracks needs to be considered is the problem of bait weight, generally speaking, the bait weight adjustment is higher, and the bait light adjustment can be lower.

As for the number of fishing, it depends on the condition of the fish, and it is said that you will eventually want to get the state of the double bait underwater.

The most classic is to adjust the four fishing two, this kind of drifting method is mostly the empty hook to adjust the eye, hanging bait to adjust the fishing eye. This kind of drifting method can adjust the state of double bait is the most, fishing float can be, fishing bottom can be, double bait can be in the end, one bait to the end and one bait is suspended, and other states can be adjusted.

The method of fishing to determine the purpose of naughty blocking is: do not hang the subline on the line group, and then add more lead skin on the lead seat (the lead skin should be heavier than the buoyancy of the float), and throw the rod into the water after installation, because the lead skin is too heavy, the float will all be submerged in the water, and then gradually adjust the float and continue to throw the rod into the water until the float is exposed at a glance.

Fishing (fishing, belongs to an outdoor sport, its goal is to use fishing gear to catch fish from the water to burn the fingers, and fishing is not limited to gender and age, generally adults and children like, the advantage of fishing is that you can get close to nature, cultivate sentiment and tease oranges.

1. The adjustment is determined according to the bait weight and the preset fishing target, so there is a saying that the bait weight determines the adjustment. Fishing mesh, we adjust the drift after the fishing cover only a few meshes, are a preset number of meshes, this mesh may not be suitable for the current fish situation, need to adjust the fishing mesh to find the mouth, so there is a fish mouth to determine the fishing mesh.

2. Adjusting the eye, according to different drifting methods, the adjusting of the drift is also different. For example, the empty hook tune Qingpei drift, the tune refers to the number of empty hooks in the semi-water state. Adjusting the drift with bait, adjusting the mesh refers to the number of meshes with bait in the state of half water.

Regardless of whether it is with bait or with an empty hook, the mesh adjustment is a preset mesh number for us, and the preset high and low mesh number needs to consider the bait weight and the preset fishing mesh. If you want to fish lower in the end, then the mesh should not be high, and if the bait is heavier, the mesh should be higher. Generally speaking, the fishing mesh = adjusting the mesh - double bait weight, note that the fishing mesh here is the most intelligent fishing mesh at the bottom of the fishing, which is the basis of the theory.

3. Fishing is a changing quantity, not immutable. For example, adjust four fishing two, according to this drifting method, when fishing 2 mesh at the bottom of the bait slightly touches the bottom, a bait is suspended, this double bait in the bottom of the water state may not be suitable for the actual fish situation, may be smart, then you need to increase the fishing mesh, fishing blunt, and the final number of fish may be 3 or even 4 mesh. Therefore, the number of fish we often talk about is actually a preset value, which needs to be adjusted to the final number of fish according to the specific situation.