When is the first class constructor exam? Is there a limit to the maximum number of majors that each

The examination time for the first-class constructor is September every year, and there is no limit to the number of majors to be examined, and all ten majors can be applied for. The premise is that you have graduated from a bachelor's degree for 4 years, majoring in engineering or engineering economics, and 6 years of junior college graduation, majoring in engineering or engineering economics.

The 2013 first-class constructor exam is September 14th and 15th, but the registration time of each province is different, this time you have to pay attention to the personnel examination network of the provinces and cities in time, there are ten majors for a constructor, as long as you meet the application conditions, you can take the exam, as long as you pass the examination of any professional (management, regulations, economics and the practice of any profession), and then take another major is an additional item, and you only need to take a practical subject, and you do not need to take a public course.

1. The 2013 first-class construction engineer qualification examination time is determined to be September.

The 2014 Class 1 Constructor Exam will be held on September 20-21.

The 2015 Class 1 Constructor Examination has been set for September.

2. 1. There is no restriction on majors, and all ten majors can be applied for.

2. Prerequisites: (1) The academic major belongs to engineering or engineering economics. (2) You can only apply for one major at a time, and then add other majors after passing.

3. The first-class constructor is a kind of construction professional qualification and a prerequisite for serving as a large-scale project manager. There are 4 subjects in the Constructor I Licensing Examination, and those who sit for all 4 subjects must pass all the subjects in two consecutive examination years. Persons who have obtained the construction qualification certificate and meet the registration requirements must be registered before they can practice in the name of a builder.

1. Scope of application for professional additional registration: According to the relevant provisions of the Ministry of Construction's "Regulations on the Administration of Registered Constructors" (Order No. 153 of the Ministry of Construction) and the "Implementation Measures for the Registration of First-class Constructors" (Jian Shi [2007] No. 101), the personnel applying for professional additional registration (hereinafter referred to as the applicant) shall meet the following conditions at the same time: (1) The applicant holds the "Registration Certificate of the People's Republic of China for First-class Constructors" issued by the Ministry of Construction; (2) The applicant holds the "Certificate of Passing the Professional Category Examination of the First-class Constructor of the People's Republic of China" issued by the Personnel Examination Center of the Ministry of Human Resources; (3) The applicant has not been found to have any of the circumstances listed in Article 15 of the Regulations on the Administration of Registered Constructors (Order No. 153 of the Ministry of Construction).

Application Form for Additional Registration of Class 1 Constructor (4-1) signed by the applicant. 2) Material attachments: 1

A copy of the applicant's valid identity document (resident ID card or passport); 2.The original and photocopy of the applicant's "Registration Certificate of the People's Republic of China for First-Class Constructors" and the practice seal; 3.A copy of the applicant's "People's Republic of China Class I Constructor Practice Qualification Certificate" and "People's Republic of China Class I Constructor Professional Category Examination Certificate"; 4.

A copy of the applicant's academic (degree) certificate; 5.A copy of the valid employment contract signed between the applicant and the current employing enterprise or the applicant.

The first-class construction engineer majors include construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy and hydropower engineering, mining engineering, municipal public works, communication and radio and television engineering, and mechanical and electrical engineering.

If you take the exam, you can add all 10 majors, that is, you can take 4 courses (3 basic courses and 1 professional course) for the first major, and you only need to take the major courses if you add items later. However, if you register, you can only register one major, which is stipulated by the state. See if you're satisfied?

There should be no limit, it depends on the needs of your company, but no matter how many majors you take, you can only register in one company. If you're in a big company and you need both construction and M&E (for example), you'll be given more money.

There is no limit to the number of times you can apply for the first-level constructor, and in principle, the first-level constructor is required.

The first-class constructor exam is taken once a year, and the examination results are valid for two years, and those who take the full subject can pass all three subjects in two examination years.

Is there a limit to the number of times I can take the exam?

A first-class constructor can apply for the exam as many times as he or she takes until he gets the first-class constructor certificate, but a first-class constructor cannot register after the age of 65. The professional qualification of first-class constructor implements a unified national outline, unified proposition, and unified organization of the examination system, which is jointly organized and implemented by the Ministry of Human Resources and Social Security and the Ministry of Housing and Urban-Rural Development, and in principle, an examination is held once a year.

Personnel who have passed the first-class construction engineer qualification examination, obtained the "People's Republic of China First-class Construction Engineer Practice Qualification Certificate", obtained the construction engineer sedan car qualification certificate, and meet the registration conditions, must be registered before they can practice in the name of the constructor. The Ministry of Construction or its authorized institution is the registration authority for the practice qualification of Class 1 constructors. Applicants who are approved for registration will obtain the "Certificate of Registration of the People's Republic of China Class 1 Constructors", and registered constructors must receive continuing education, update their knowledge, and continuously improve their professional level.

The first-class constructor has the right to serve as the project manager of the construction project in the name of the constructor; Engage in the management of other construction activities; Engage in other businesses stipulated by laws and regulations or administrative departments. Class 1 Registered Constructor qualification is a necessary condition for working as a project manager for large and medium-sized projects.

About the Registered Constructor Exam.

For other questions, you can enter the Gordon Future Construction Network for consultation.

There are 10 professional categories of first-class constructors, namely: construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, mechanical and electrical engineering, and only one major can be selected for each examination.

There are 10 majors in the first-class construction engineer examination: construction engineering, mechanical and electrical engineering, municipal engineering, water conservancy and hydropower, highway engineering, railway engineering, mining engineering, civil aviation airports, ports and waterways, communications and radio and television.

One of the 10 majors, candidates can only choose one major each time to apply for the examination, candidates can not apply for more than one major at the same time, if candidates need to apply for more than one of the majors due to the need for work, but also can only obtain one of the professional qualification certificates and then apply for the rest of the majors, that is, a construction addition.

The results of the additional examination are managed on a non-rolling basis, and those who take the examination must pass the examination subjects within one examination year. After passing the examination, the corresponding professional qualification certificate uniformly printed by the state will be issued. This certificate serves as the basis for adding the category of practicing profession at the time of registration.

Start by thinking about your majorRelatively speaking, everyone is most familiar with the major they studied in college, and it is also the easiest to pass the exam. If it is not used as a starting choice when taking the first test, then it can be applied as an add-on.

Consider the relevance of the professionsThe municipal engineering major includes various public infrastructures, bridges, road pavements, and roadbeds supporting urban life, which is related to the highway engineering major. The foundation and foundation, earthwork, concrete structure, and steel structure in the construction project are also the content that must be learned in municipal engineering, and the municipal matching building is also a common addition scheme.

Think about your future career plan in the long runAfter all, a construction and additional certificates have an important impact on the career trajectory of a lifetime, and if you waste time to get a professional direction that you don't want to engage in in the future or suddenly have a good job opportunity but don't have the qualification certificate of the corresponding major, it will be too late to regret it.

The first-class construction engineer is divided into 10 majors, namely construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy and hydropower engineering, mining engineering, mechanical and electrical engineering, municipal public works, communication and radio and television engineering. First-class constructors can take multiple majors, but they can only apply for one major at a time.

There are four subjects in the first-level construction engineer examination, namely "Construction Engineering Economy", "Construction Engineering Regulations and Related Knowledge", "Construction Engineering Project Management", and "Professional Engineering Management and Practice". Justifying.

Among them, "Professional Engineering Management and Practice" is a professional subject examination, which is divided into 10 majors, namely construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, mechanical and electrical engineering.

1. "Construction Engineering Economy" includes three parts: engineering economy, engineering finance, and construction project valuation, mainly to build a complete knowledge system of construction engineers.

2. "Construction Engineering Regulations and Related Knowledge" includes the legal system of construction projects, contract law, and the handling of construction project disputes, mainly the main laws and regulations involved in the process of project construction.

Among the 10 majors in the first-class construction engineer examination, candidates can only choose one major to apply for the examination each time, and candidates cannot apply for more than one major at a time.

If candidates need to apply for more than one major due to work needs, they can only apply for the rest of the majors after obtaining one of the professional qualification certificates, which is often referred to as an addition.

Candidates do not need to take public subjects for additional majors, but only need to take professional practice. For the additional examination subjects, the non-rolling management method is implemented, that is, the professional subjects you apply for need to pass the examination within one year, and after passing the examination, the state will issue the corresponding certificate, which is used as the basis for the additional subjects.

The examination is divided into 10 majors, including construction engineering, mechanical and electrical engineering, municipal engineering, water conservancy and hydropower, highway engineering, railway engineering, mining engineering, civil aviation airports, ports and waterways, communications and radio and television.

One of the 10 majors, candidates can only choose one major each time to apply for the examination, candidates can not apply for more than one major at the same time, if candidates need to apply for more than one major due to work needs, they can only register for their Zhidong Town after obtaining one of the professional qualification certificates, which is often said to be a construction addition.

1. Construction of additional examination subjects:

There are four examination subjects for first-level constructors, namely "Construction Engineering Economy", "Construction Engineering Project Management", "Construction Engineering Regulations and Related Knowledge", and "Professional Engineering Management and Practice". Among them, "Construction Engineering Economy", "Construction Engineering Project Management", "Construction Engineering Regulations and Related Knowledge and Knowledge" are the unified examination subjects, and "Professional Engineering Management and Practical Warfare" are professional subjects.

Additional Exam Score Management:

Implement non-rolling management methods: the corresponding professional examination results of first-class constructors shall be managed on a non-rolling basis, and those who take the examination must pass the subjects within one examination year. After passing the examination, the corresponding professional qualification certificate will be issued uniformly printed.

This certificate serves as the basis for adding the category of practicing profession at the time of registration.

Get free learning materials and knowledge maps for first-class constructors.