How to construct flat windows to bay windows, and precautions for bay window construction

Hello, glad for your question. In order to change the window involves the façade of the building, so the property generally does not allow you to change, even if the property allows, it is not recommended that you make such changes, it is easy to do a series of problems such as water leakage if you do not do it well. I hope I am helpful to you.

The bay window is generally well lit, so the countertop needs to consider light resistance, otherwise it will cause discoloration and deformation; Due to the large temperature difference between indoor and outdoor in winter, there will be condensation at the bay window, so it is necessary to avoid the deformation of the material used due to moisture. It is recommended that the countertop should be made of marble and other stones or sauna boards, which are waterproof and sunproof and easy to take care of, so as to avoid the above problems. If you choose a marble countertop, you can add some cushions and cushions on top so that you don't feel too cold when sitting or lying on it.

First, the design points of the "fake bay window".

Generally speaking, there is no bay window in a new house, and many families are "fake bay windows" made by customizing furniture according to their own preferences, which refers to the effect of transforming into bay windows through the design of furniture. This design not only greatly increases the aesthetics of the space, but also improves the storage and utilization rate of the space, which is deeply loved by the majority of young owners.

The method is very simple: make a low cabinet with the same height as the window sill, with a height of 45 cm and a depth of about 50 cm, to create the feeling of a lower window sill, and place some furniture on both sides of the window, which basically makes it look like a bay window.

The most common practice is to customize a set of low cabinets as the base of the bay window, which is very beautiful, and can also place sundries for storage.

Second, there are two points to pay attention to when transforming ordinary windows into bay windows.

1. The larger the bay window area, the worse the thermal insulation performance in winter, and the more solar radiation in summer will also increase the power consumption of the air conditioner. It is recommended that when designing the bay window, it is necessary to ensure the thermal insulation performance of the bay window to avoid problems such as condensation, dripping water, and mildew.

2. For middle and high-rise residents, in addition to designing guardrails, bay windows must also use safety glass. It is not recommended to design bay windows in the children's room, and it is more dangerous for children to like to climb.

Smash it, hit a base cabinet where it was smashed.

When the steel bar under the nail template of the floor slab is done together, the steel bar of the floor slab pulls out a few strips to make a cement wall, and then the one-time pouring is completed together with the window sill slab, and the floor slab, the cement wall, the window sill slab are poured at one time to complete.

Bay windows, generally rectangular or trapezoidal protruding to the outside, are glazed on three sides. There are two types of bay windows, the outer bay is convex, the inner float is flat and concave, the outer bay window is generally glass windows on three sides, protruding from the wall, and the bottom is volleyed, and the inner bay window generally has one side of glass and two sides are walls, which is relatively safe, but will occupy indoor space.

Large lighting glass and spacious window sills give people a broader vision and give life a romantic and warm color. The bay window, as the name suggests, is the window that floats out. A general bay window can be rectangular or trapezoidal and protrude from the interior to the outside.

The bay window is glazed on three sides, and the height of the window sill is lower than that of a normal window. This design not only facilitates large areas of glazing, but also retains the spacious window sills, so that the interior space can be visually extended.

Generally, windows are made within the vertical plane of the wall, and if the window protrudes outside the wall, it becomes a bay window. The popular bay windows can generally be divided into two forms, the first is with steps, and the other is floor-to-ceiling. The bay window can not only increase the lighting and ventilation functions of the house, but also add architectural charm to the façade of the commercial house.

Based on this, the calculation of the bay window area has become one of the hot spots that the owners are concerned about. Depending on the function, bay windows can be divided into multi-functional leisure types (semi-circular lounge areas, temporary guest rooms) and practical desk types.

The general form is that there are steps and the other is completely grounded and integrated with the ground, which not only increases the function of lighting and ventilation of the house, but also adds architectural charm to the façade of the commercial house.

It is recommended to follow the first method of construction you said, and the intersection of the eaves of the bay window and the exterior wall is easy to leak in the second construction.

Hey, I'm just upgrading for the sake of upgrading.

[Tumu. Speed on the map. 】

Your question. Wouldn't I just be answering the wrong question?

The drawings are electronic sheets. I can see that the steel bar is coming. You're going to get on paper. The one with the rebar.

The specific steps are as follows:

1. First of all, the original flat window should be removed.

2. The bottom of the window sill is laid with steel bars and formwork, and the two ends should be at least 100 150mm into the outer wall on both sides, and the cast-in-place concrete floor.

3. The same formwork and cast-in-place concrete roof should be connected and poured together with the steel bars of the lintel or ring beam, otherwise it will rain and leak.

4. Wait for a week to remove the mold and plaster, and pour a window cover to save rain and water leakage between the exterior wall and the window.

5. The last step is to customize the bay window according to the required size.

Precautions for bay window construction:

1. The larger the bay window area, the more unfavorable it is for thermal insulation in winter, and the excessive solar heat radiation transmitted through it in summer will increase the power consumption of air conditioning.

2. When setting up the bay window, the thermal insulation performance of the bay window must be guaranteed, otherwise it will not only cause waste of energy, but also be prone to problems such as condensation, dripping water, and mildew, which will affect the normal use of the room.

3. In winter, the bay window is also prone to condensation. Therefore, from the perspective of energy saving, residential buildings should not be equipped with bay windows.

4. The size of the window should not only meet the lighting rate, but also take into account the thermal insulation and energy saving. The ratio of the area of the living room to the window is generally one-seventh to one-sixth to meet the lighting demand.

The above is a detailed answer to how to construct a flat window to a bay window and a precautions for the construction of a bay window.