There are too few bees in the spring and they want to reproduce quickly, what should they do?

For our beekeeping friends, we all know that spring is the key season for our beekeeping, and the most important thing is how to quickly cultivate bees into a strong group, which is directly related to whether the nectar source can be successfully captured in early spring. How to quickly breed bees into strong colonies in early spring is well controlled by experienced beekeepers. Because they are familiar with the local climate and honey**, they can effectively cultivate collection bees in advance, quickly cultivating bees into strong colonies.

So without these experiences, how can our new beekeeping friends quickly multiply bees into a powerful colony? The low temperature in early spring is not conducive to frequent unpacking and inspection, and the bee removal time can be determined by observing outside the box. In early spring, if the bees have already started feeding, the queen bee has placed an order, and then we can start sorting the bees.

The main thing is to remove the old spleen of the bee colony and then observe the weather. If there are more than a week of sunny days in a row, a colony can be rewarded.

Reward feeding is best with high-quality honey, preferably with pure honey. Feed a little every night, not too much, and stick to it for three days. In addition, when the weather is cold in early spring, it is necessary to always pay attention to heat preservation, and at the same time protect the bees but not the spleen, reduce the bee path, increase the nest temperature, promote the queen bee to lay eggs, and let the spleen spread rapidly.

After the first reward feeding, the number of young bees in the colony increased over a large area. After some time, the first young bees begin to come out of the house. At this time, try to let the king lay more eggs, pay attention to whether the colony has a drone room, and whether the queen bee lays drone eggs.

If the queen bee lays drone's eggs, it's time to start looking at the potential of the colony. If the colony potential is strong enough, we can replace the queen bee. If the population potential is not strong, let the queen bee.

For our special season, such as the winter is relatively long, the place where there is no winter should be postponed or advanced.

This time is the rapid period of bee ** exhibition after the queen bee replacement. At this time, the weather has improved, and the nectar source is abundant. The best way for a queen bee to lay more eggs is to reward feeding.

The amount of feeding is still small, pure honey is best. Because of the change in the queen bee, the colony lays eggs vigorously, which is a good time to increase the nest base. To seize the opportunity of the new king to lay eggs quickly, replace the bee spleen full of eggs in the successful colony with the failed bee colony, and cover the nest The wrong thinking of novice beekeeping is that bees can only operate in whole boxes, and old beekeeping is different, and old beekeeping operates in multiple boxes.

The method of raising the spleen to allow bees to reproduce has been mentioned. This method is unknown to many novices, but it is a common technique used by experienced beekeepers. The reason why newbies don't use this method is mainly mentality.

Many beekeepers always attach their bees to a box, thinking that they can only operate on the box. In fact, this is wrong, just like in the previous article, Bian Xiao said that bees can promote reproduction by raising spleens, but a large number of netizens asked how to deal with the raised spleens. This is actually a very simple problem, because bees do not recognize the spleen, as long as they are kept in their own colony, they can still take care of their children.

So the average beekeeper will use fewer babies to deal with the colony. The most common method is to extract the spleen from a colony with more babies and place it in a colony with fewer babies, but be careful to shake the bees on the spleen, otherwise it can easily lead to a fight between the two groups of bees.

Reasonable bee relationship is a necessary prerequisite for the rapid reproduction of bee colonies, too few bees and want to reproduce quickly must first adjust the bee-spleen relationship, such as climate, nectar source and other conditions are more general to ensure that there are more bees than spleen, when the climate is suitable and the nectar source is abundant, it can be appropriately relaxed to the bee spleen proportionate, in fact, at any time the bee colony is less than the spleen for a long time, the group will inevitably collapse.

I don't know much about this, but the honey produced by bees is really delicious, and the nutritional value of honey is also very high, so it is very popular in the market.

Be sure to maintain the right humidity. Guarantee their temperature. It is better not to collect honey too often, and to have enough food. It can also be supplemented artificially. Also check the quality of the queen bee.

The most common method is to extract the spleen from the colony with more children and put it into the colony with fewer children, but it is necessary to pay attention to shake the bees on the spleen, otherwise it is easy to cause two groups of bees to fight.

1. Be sure to choose a high-quality queen bee.

The queen bee is responsible for the reproduction of the entire bee family, so if you want the bees to reproduce quickly, you must choose a high-quality queen bee.

We can breed the queen bee by selecting a strong and excellent bee colony in our apiary as the queen bee breeding mother group, and at the same time selecting an excellent bee colony as the parent group; The second is to ensure the quality of the queen bee in the colony by purchasing high-quality queen bees from agricultural institutions or professional breeding institutions; The third is to pay attention to the queen bee is robust and has a strong ability to lay eggs. If we do these things well, our queen bee problem can be solved.

2. The powder must be sufficient.

Many people in beekeeping, if they find honey after always take it out, but this is not good for bee reproduction, many worker bees choose to abandon the larvae because there is no honey powder, and some queen bees will reduce the number of reproduction or reproduction due to the lack of honey powder.

Therefore, when people take honey, they must observe the sufficient amount of honey powder, and must leave some honey powder in the nest, so as to effectively improve the speed of bee reproduction, and secondly, to observe whether some pollen is sufficient.

3. Be sure to do a good job of management in summer.

Bees are not easy to survive in winter and summer, many people pay attention to bees wintering but pay little attention to bees in the summer to prepare for the heat, the average person will choose to keep bees in the shade, and if you find that the natural enemies of bees must be removed, if necessary, manual removal.

In general, bee reproduction needs three roles of climate and breeding methods, and at the same time can promote the reproduction of bees, the climate should not be too high, not too low environment, it is best to choose a place with flowers in the wild, because only then only the pollen is sufficient, the reproduction of bees will be guaranteed to a certain extent.

Allowing bees to eat fresh and abundant pollen can increase the reproduction rate of bees, which is why many people go to the wild to pick flowers and take them to a beekeeping place for bees to use.

The best thing to do is to put the honey and the bees together, and then they will form a mating phenomenon, in which case they can reproduce quickly.

1.Cold bees, hot spring breeding is actually what we often say about packaging for bee colonies to keep warm, helping bee colonies to replicate normally at low temperatures, and reducing the burden of worker bees to maintain the temperature of the hive. 2.

The basic operation method is similar to the hot spring breeding method, which is to adjust the bee colony to keep the bees dense, and then carry out appropriate feeding to let the bee colony develop smoothly. The difference is that Leng Chun Fan will not pack the bee colony to keep warm, and will not artificially raise the temperature of the hive, but only rely on dense bees to protect the spleen.

During the spring season, two beehives should be placed side by side. In the evening when there is no wind, each group of bees is fed 275 milliliters of sugar water or honey mixed with water in the same proportion as sugar and water, and they are supplemented from the bottom of the tank every night. Feeding should be diligent, 1 time per night, can not be interrupted, and the amount of feeding should not be too large.

It should be kept warm in moderation, because the temperature is high and the bees are active, so the reproduction will naturally be faster.

The reproduction of bees in early spring should focus on the feeding of food and water, the composition of the group, and the control of the living environment.

The specific reproduction is as follows:

1.Feeding honey or sugar: In early spring, the overwintering feed is exhausted, and the honey storage in the nest is insufficient, so it is necessary to use a frame feeder or a box top feeder to feed a large amount of thick feed in a short time.

The thick feed is 4 parts of honey plus 1 part of boiling water, stir to melt it, or 2 parts of white sugar plus 1 part of water, and simmer to melt. Add stone acid to the syrup, and remove the fire immediately after boiling, which can promote the conversion of sucrose;

2.Feed pollen or substitutes: Feed pollen as soon as the hive is crumpled in the spring.

4 kg of pollen and kg of concentrated syrup are mixed evenly to make a soft and suitable sugar cake. You can also use 3 kg of defatted soybean flour and 1 kg of pollen to make sugar cake with concentrated syrup. Spread the pollen sugar cake on the frame beam of the honeycomb and cover it with a layer of plastic film to prevent hard bees from springing technology.

Each flock is fed 100-300 grams each time, and the bee colony can feed it in about 7 days, and feed it until there is a source of pollen in nature;

3.Feeding: In early spring, when the insects are raised, the colony receives water from hundreds of bees every day.

In order to reduce the labor of bees collecting water, water can be fed at the nest door with bottles or feeders, automatic feeders or water bottles and tampons. After the weather warms up in late spring, set up a drinking fountain or a water basin with a floating plate in the apiary, and you can also use a frame feeder to feed water on the outside of the hive;

4.Salt feeding: When feeding water or sugar, salt can be added, and the concentration of salt should not be too high, too high is harmful to bees;

5.Single spleen spring propagation: single spleen spring propagation is a feeding technology starting from one nest spleen, which can make the queen bee spawn area reach the full spleen level in the early spring cold period, and at the same time ensure that the bees are not frozen, so that the bee colony can grow rapidly and be put into the production of bee products as soon as possible.

Experienced beekeepers, most of them take strong swarms of darkroom wintering, and each group of single king groups has kilograms of bees, about 6 boxes of bees or more. Each colony has kilograms of bees, and each queen bee has about 4 framed bees. Double queen bees make up about half of the overwintering bee colonies, and the queen bees are put in the queen bee cage during the overwintering period to stop laying eggs;

6.Organize a double king group: 5 boxes - 2 boxes of bees of the weak group, can form a double king group, that is, use the gate plate to insert in the beehive**, divide the beehive into two chambers, put 1 group on each side of the gate, each group with 2 nest spleens, for a small group of more than 1 box, so that one side of the nest spleen is close to the gate, and the outside of the nest spleen is close to the outer partition, so that the two nest spleens have 1 bee road, which is convenient for the bee colony to keep warm;

7.Hive insulation: after the bee excretion, in order to help the bee colony maintain a large area of suitable temperature for breeding insects in the center of the hive, the measures to tighten the spleen and shrink the nest are usually taken, and when the bee colony is comprehensively inspected, the hive is arranged, the general practice is to put forward the empty spleen of the bee is not strictly protected, there are more than 3 boxes of bee colonies, so that the number of bees is more than the number of the nest spleen 1 box, there are about 3000 bees on each spleen, and the bee path can also be reduced to 9 mm, due to the dense bees, the temperature in the hive can be better maintained and regulated, and the queen bee lays eggs more concentrated, The spleen area is large, the larvae are also well fed, and the new bees are healthy.

Replace the queen bee: In the case of abundant honey sources in the outside world, replace the old, weak, sick and disabled queen bees, and breed a large number of wintering bees. Controlling the Temperature:

In early autumn, the beehives are covered with straw curtains, and in late autumn they are covered with quilts to keep warm. Adjust the group potential: Before the autumn multiplication, it is necessary to use the strong to supplement the weak intermodulation spleen, and adjust the capped spleen in the strong group to the weak group to enhance the swarm potential of the bees.

1. Replace the queen bee

When bees breed in autumn, in order to speed up the reproduction, it is necessary to replace the queen bee in time, because the new queen bee has a relatively strong egg-laying ability, and in the case of abundant external honey sources, replace the old, weak, sick and disabled queen bee, so as to give full play to the egg-laying advantages of the new queen bee and cultivate a large number of wintering bees.

2. Control the temperature

When breeding bees in autumn, because the temperature in early autumn is still relatively high, this time it is necessary to cover the beehive with a layer of grass curtain, and at the same time strengthen the internal air convection to provide suitable breeding conditions for the bees.

3. Adjust the group potential

When the bee colony is reproducing in autumn, it is necessary to adjust the colony according to climate change, the principle of bees and spleens in the early stage, avoid rushing to add spleen in the middle and late stages, and make more bees than spleens, and before the autumn reproduction, it is necessary to make up for the weak and intermodulate the spleen, and adjust the cap spleen in the strong group to the weak group, so as to enhance the group potential of the bees.

4. Breeding time

The autumn breeding time of bees in the south is from September to October every year, while the bees in the north begin to reproduce in August, due to the slow decline in temperature in the south, the bees generally end their breeding in mid-December, and the north completes the breeding task in October.

Summary. Hello dear, it is a pleasure to serve you. In the spring, bees breed, alternately bee down why bees disturb, because in spring, the main reason for bees falling alternately is the reproduction of species.

Along with warmer temperatures, they actively seek out sugar-rich pollen for easy reproduction. Once the nest is completely replaced by one generation, the new nest will become crowded, which makes the old bees panic and get involved in the scheduling, the old bees swell from the old nest to the new nest to breed, while the young bees will run outside and form a bee disturbance. Thank you for your patience, I am happy to answer your questions, if you are satisfied, I hope to get your likes, I wish you a happy life

In the spring bees breed, alternately beeping down why bees disturb.

Hello dear, it is a pleasure to serve you. In the spring, the bees multiply and hail skillfully, and the bees come down alternately Why do bees disturb, because in the spring, the main reason for the bees to fall alternately is the reproduction of the species. Along with warmer temperatures, they actively seek out sugar-rich pollen for easy reproduction.

Once the nest is completely replaced by one generation, the new nest becomes crowded, which makes the old bees panic and get involved in the scheduling, the old bees swell from the old nest to the new nest to breed, while the young bees are run outside and leak, forming a bee disturbance. Thank you for your patience, I am happy to answer your questions, if you are satisfied, I hope to get your likes, I wish you a happy life

When will it be installed?

Dear, the best time is in the spring when the bees are preparing to breed, install devices to prevent bees from disturbing. Spring is the season of bee breeding, you can install some bee handles, such as nose, mouth and other devices before the bee fence, when the bees return to the fence, they will be blocked by the bee handles, no skin is good to put the bee handles inside, can not continue to reproduce. In this way, it is effective to stop bees from breeding.

When I talk about beekeeping, why do you say eggs?

Hello dear, it's beekeeping.

Right. Hello dear, do you want to ask about the technology of beekeeping and reproduction?

Right. <>

Speak. During the spring breeding period, each 2 beehives are placed side by side, and Liang Xiang collects them in the windless evening, and feeds each group of bees sugar water (1 1 for sucrose water) or 250 300 ml of honey for water. After 2 hours, when the bees are excited and dispersed, and the temperature in the box rises, the bees can be shaken to tighten the spleen.

When the spleen is tightened, only one spleen can be left for missing beats, and all the excess spleen can be raised, which can promote the queen bee to lay eggs quickly. Generally, the queen bee can lay eggs 1 to 3 days after the spleen is tightened.