Bathroom waterproofing is a problem that must be paid attention to, how many times do you need to do

The waterproof should be more than one meter high, and it should be done three times in the same way, and the first waterproof can only be done after it is dry. If the first waterproofing is not dry, the next procedure is carried out, the waterproofing effect is not good, and the water will slowly seep to the opposite side of the wall when taking a shower.

Waterproofing needs to be done three times, and doing it three times can make the waterproof thicker and firmer, and it is not easy to leak.

Waterproofing is good only once, and if you do too much, it will be wasted, in fact, there is no need.

The family's washing is all done in the bathroom, so there is a lot of water. In order to live more comfortably, there will be no water leakage. So the waterproofing will be done very seriously.

How many layers should be made for waterproofing in the general bathroom? If there is anything you need to pay attention to when brushing, let's take a look. When waterproofing the toilet, you should first treat the corners of the wall and around the pipes.

The mouth of the pipe needs to be made of special materials, and the 20 centimeters from the ground to the wall should be made of a somewhat ductile material. The walls are covered with ordinary materials. Generally, the waterproof surface of the bathroom is about 30 centimeters.

In the bathing place and wash basin, it is best to do one meter eight directly, and when waterproofing, it is brushed twice, not twice in the traditional sense. As long as you brush it carefully, you can do it all at once. Generally, the waterproofing of the bathroom needs to be brushed twice, one layer is brushed when backfilling, and then brushed again after filling.

When brushing, once horizontally and vertically. The plain cement pie mortar is to make the waterproof layer more strong and will not break in layers. Generally, the bathroom is waterproof, and it should not be too thick when brushing, otherwise cracks will appear.

When you don't get the material, you should stir it first, so as not to precipitate, otherwise it will affect the effect. Roll it several times when brushing, so that no bubbles appear. The thickness should be moderate, too thin or too thick, if it is too thin, it should be repaired.

Generally, the toilet is dustproof and water in the morning, and after the first time it is completely dry, check the quality of the project. Then do a closed water test, and start backfilling when there is no problem. After the substance is dry, it can be brushed for the second time.

When brushing, you should brush horizontally and vertically. In this way, the waterproofing of the entire toilet will be very tight. The closed water test must be done so that it can be used safely in the future.

The general toilet waterproofing practice has been clearly introduced, and it needs to be brushed twice in order to be stronger. After thoroughly drying every time you brush, proceed to the next step. The coating should not be too thick, otherwise cracks will appear on the surface, which will also give an impression of the waterproof effect.

You need to scrape the waterproof material, and you generally need to brush the waterproof three times, which will be better and not easy to leak.

The first waterproof paint of the bathroom should be brushed with waterproof paint, the height and thickness of the paint need to meet the standard, the second time is to brush the second time after the paint is dry, and then the waterproof paint will be laid on the surface of the coating after it is dry, and the closed water test is also required; The waterproofing needs to be done twice, the first waterproofing will be evenly applied to the base layer, the second waterproofing is brushed horizontally and vertically twice, and finally the closed water test is carried out.

Bathroom waterproofing should be done at least twice, the first time should be before the backfill, the second time is after the backfill, and each time the waterproof test must be done, and the waterproof test time must be enough for more than 24 hours.

<> waterproofing of the bathroom is generally done 2 times, when doing waterproofing, it is necessary to pay attention to the uniform coating, there can be no sedimentation, because it will cause the bond is not firm, and the phenomenon of water leakage occurs, the first time the bathroom is waterproof during the construction, the second time is to do it once before pasting tiles, because the construction of water and electricity will destroy the original waterproof facilities to prevent water leakage. It should also be noted that the materials of the bathroom must be environmentally friendly when doing waterproofing, and flexible waterproof materials must be chosen, because the house will have a little displacement after a long time, especially for houses above the 20th floor, flexible materials can effectively place the house leakage.

The bathroom is an area of home life where water is used more frequently, and it is also a more humid part of the home, so waterproofing is very important for it. If the waterproofing is not done well, it is very easy to get wet and leak. So, how many times do you do bathroom waterproofing?

What should I pay attention to in the waterproof construction of the bathroom? Let's find out together.

Bathroom waterproofing is generally done 2 times, the first time is carried out during the construction of the bathroom, that is, before the backfill. However, due to the destruction of the original waterproof facilities when taking water and electricity, it is necessary to do waterproofing again before tiling. When the bathroom is waterproofed, it is necessary to pay attention to the uniform coating, and there can be no local deposition, otherwise the bond will not be firm.

Precautions for waterproof construction of toilets.

1. When choosing waterproof materials for toilets, we must pay attention to its environmental protection, as far as the current market situation is concerned, there are waterproof materials of various qualities, and there are many differences. Therefore, when buying and choosing, you must pay attention to choosing a well-known brand and an environmentally friendly material that is suitable for home decoration.

2. The areas that need to be waterproofed in the home are mainly bathrooms and balconies, while the waterproofing above the second floor is mainly to prevent water leakage downstairs. For new houses, the high incidence of water leakage is between 3 and 5 years after moving in, if the bathroom is often soaked in water after moving in, then it will take 3 to 5 years of saturation after water leakage, and then it will leak downstairs.

3. When operating the bathroom waterproof, we must pay attention to some details, and it is best to make the process a little outside. In addition, waterproof materials are mainly divided into ordinary type and flexible type, it is recommended to choose flexible waterproof materials, especially for 20-storey houses, because after a long time, the house will have a little displacement, if you use flexible waterproof materials, there is a good tension to prevent the house from leaking.

Article summary: The above is all about how many times the bathroom waterproofing is done and what needs to be paid attention to in the waterproof construction of the bathroom, I hope it will help you. If you want to know more about it, please stay tuned to Qeeka Home.