What should I do if I am ready to install a mop pool in the bathroom, but there is no reservation an

Solution: You can make the mop pool and shower water share.

The sprinkler heads on both sides of the wall should be waterproof at a height of 1 8 meters, the area of the noodle pool is 1 2 meters, and the remaining 0 3 meters On the other hand, in order to prevent water from soaking on the wall, causing the mold on the wall, the ground should be completely waterproof.

If you use a floor drain.

Direct 3 inserts, sink and washing machine share the sewer, the balcony must be waterproof, the advantage is that once the balcony has water in the future, this floor drain can prevent the water from flooding.

If you use a vertical pipe, you can also use a tee directly into the water, the advantage is that the washing machine and sink will not overflow no matter how much water flow is large, and if you use a vertical pipe, the balcony waterproof is not needed.

Unlike normal residential drainage, basement drainage will be more complicated, after all, if there is no sewerage, it will lead to the embarrassing scene of sewage not being discharged.

Under normal circumstances, we need to dig a pit, and then place 2 submersible sewage pumps in the pit, and the sewage is all collected into the pit and automatically discharged, but the biggest problem with this sewage placement is that the sealing is very poor, the odor is difficult to eliminate in the later stage, and it will be very troublesome to clean up, so it is generally suitable for some public sewage use, and it is not recommended to use it in the basement of a family villa.

The basement of the household villa for the environment is still relatively high, after all, the air circulation is poor, and the emergence of the sewage lift pump just solves these problems, the equipment comes with a fully sealed box, the sewage is all collected inside the box, not in contact with the external environment, the outside will not produce any peculiar smell, and with the discharge, the sewage inside the box will be automatically discharged when it reaches the designated water level, and the follow-up maintenance does not need to be manual, saving a large part of manpower.

To put it bluntly, the sewage lifting pump is to directly lift the sewage to the municipal main sewage pipeline, and will not rely too much on the sump, in addition, many people will also worry about whether the sewage will flow back into the basement.

In fact, there is no need to worry about it at all, generally the equipment will be equipped with a one-way check valve, the check valve is in an open state every time the drain is discharged, and the check valve is in a closed state after stopping the drainage, which is to prevent the sewage from flowing back into the basement.

With such a guarantee, the safety factor of basement drainage will be much higher, and there will hardly be such a devastating scene as flooding the basement.

Basements are common in our lives, underground shopping malls, underground garages, villa basements, basement space is lower than the municipal main pipeline, which brings a problem, is the need to set up a separate drainage system. So how to renovate the basement and do drainage?

The basement is drained, and as a designer, the question that must be clarified is, what kind of water is discharged? How much is the row? What is the lifting height?

Different from the drainage of the ground floor, the drainage of the basement needs to determine the approximate size of the sewage lifting pump according to the drainage volume and lifting height, and different types of sewage lifting pumps, the size of the box is different, the inlet and outlet water caliber is different, and the corresponding hydropower transformation and pipeline reservation standards are also different.

To renovate the basement, especially if you want to have basic living functions, drainage is the first problem to be solved. In the early design, consider the location of the equipment in advance, reserve the pit position, water and electricity positioning, etc., and the follow-up equipment will be much simpler.

Generally speaking, the basement of the family villa is mostly based on the needs of new toilets, kitchens, and tea bars, and there are general standard models for commonly used sanitary ware drainage. For example, the toilet lifting pump is equipped with multiple water inlets such as toilets, basins, sinks, mop sinks, etc., to meet the needs of different sanitary ware and directly connect the sewage into the machine.

For example, whether the sewage lift pump can monitor the drainage situation in real time, whether it supports real-time fault warning, and pushes information to the mobile phone.

With the real-time monitoring and early warning function, in the event of an emergency in the basement, such as waterlogging in the rainy season, accidental water leakage, etc., the early warning information can be pushed to the owner's mobile phone in real time to ensure that the fault is dealt with in time and will not cause further losses.

Commercial sewage lift pumps, such as public toilets, restaurant kitchens, etc., need real-time monitoring and alarm functions. Notify the fault in time, eliminate the fault in time, and avoid the inconvenience caused by affecting the normal operation of public places.

Zhiliu intelligent sewage lifting pump, S1 standard continuous operation motor, intelligent sewage lifting control system, with leakage water monitoring, 24-hour real-time monitoring and alarm, basement drainage is more secure!

How do I remove the mop pool? There is a mop pool installed on the floor of the bathroom at home, which is basically useless, and I want to take it off, but it is firmly glued by the glass, what is it.

Hello, you can remove the mop pool by unscrewing the screws, and a mop pool is installed on the bathroom floor in the rotten home stove, which is basically useless, and you want to take it off, but it is firmly glued by the glass, and you can take it off after soaking it in white vinegar for a period of time. For the removal of the mirror, first use ice cubes to low-temperature the front of the mirror, because in such weather, the viscosity of the glass glue is large, and only by lowering the temperature can the viscosity be reduced. For the edges, use a utility knife to stick to the wall and cut a little bit, so that it will not leak to the wall and the back of the mirror.

Do the same for the glass glue on the mirror and the wall after taking it off.

Drainage can be shared with the drain under the tap.

Don't knock on the floor tiles, waterproofing should be done new, the amount of work is large and unsafe.

Use a hanging mop pool or a mobile mop pool.

Then you can only use a mop bucket, and then renovate for fear of destroying the waterproof.

Plus tee and tub share a sewer pipe

The walls on both sides of the sprinkler head should be waterproof at a height of meters, the surface pool area should be meters, and the rest should be reversed meters to prevent water from soaking the wall and causing the wall to become moldy, and the ground should be fully waterproof.

If you use a floor drain, directly plug in the tee, the sink and the washing machine share the sewer, the balcony must be waterproof, the advantage is that once the balcony has water in the future, this floor drain can prevent the water from flooding.

If you use a vertical pipe, you can also directly use a tee to share the sewer, the advantage is that no matter how large the water flow of the washing machine and the washbasin is, it will not overflow, and if you use a vertical pipe, the balcony waterproof is not needed.

Just share a drain with the washing machine and the tee, and the faucet is better to take one out.

The sewer hose of the dun cloth pool is loosely knotted, and the return bend is replaced, and there will be no odor to return; The place where it connects with the PVC pipe can be plugged up.

A rubber padding on each leg under the washing machine will solve the problem, don't be too big and not look good.

Your question is really not very clear o ( o First of all, there is no floor drain that can drain the ground water and the water of the dun cloth pool at the same time, unless it is water-sealed, but the anti-odor effect is not good. The pier cloth pool is a hose directly next to the washing machine can be used directly to drain the floor. Nowadays, there are single and double pipes that can be directly connected to the hose on the top of the anti-odor floor drain, and the connection is tight.

I recommend you an anti-odor floor drain, which should solve your problem - a very core anti-odor floor drain, which uses the principle of directional gravity, which has a better odor effect and smoother drainage. The unique single and double casing design makes the floor drain of the washing machine more tightly connected and the anti-backwater effect is more obvious.

There are sales in all major building materials cities in Beijing, and other areas can log in to the official ** consultation and purchase of the non-core core

There should be someone who takes a picture of you and comes up to help you take a look!

Abstract: The bathroom is equipped with a mop pool is the decoration scheme chosen by many families, but sometimes the toilet does not have a reserved mop pool drain, because the mop pool needs a drain to drain sewage, if there is no sewer, it can only share a drain with other parts, or directly give up the mop pool, and place a mop bucket in the bathroom instead of the mop pool. Attention should be paid to the selection of waterproof and anti-corrosion materials for the mop pool in the bathroom, and attention should be paid to the waterproofing of the ground and wall.

Let's take a look at the installation of the toilet mop group bend leak pool. 1. What should I do if the mop pool in the bathroom is not in the water?

The mop pool is generally installed on the balcony or bathroom, and it can only be installed in the bathroom if the balcony area is not enough, but what if the toilet has not enough sewer and there is no reserved mop pool drain?

There is no need to worry about the toilet mop pool without going into the water, you can usually do not need to go into the water, when using the mop pool, find a collapsed hose to connect with the faucet in other places, and then disassemble it when it is used up. You can also consider sharing a drain with the rest of the bathroom.

However, it should be noted that if the toilet mop pool is not reserved for sewerage, it is not recommended to make a sewer by yourself, because the waterproof layer of the bathroom has been done, if you want to reopen a sewer, you need to do waterproofing and decoration again, which is more troublesome and the cost is relatively high.

Second, what should I do if there is no mop pool in the bathroom.

If the bathroom does not have a reserved mop pool drain, and it is more troublesome or dirty to share a sewer, you can only give up installing a mop pool in the bathroom, so what can be replaced by a mop pool in the bathroom?

In fact, the alternative to the mop pool is the mop bucket, which mop bucket can be rotated on the market now, one side can store water, and the other side can be wrung out by rotating, it is still more convenient, but it is more troublesome to carry the mop bucket in the process of mopping at home, and it is not as practical as the mop pool.

Third, what problems should be paid attention to in the bathroom with a mop pool.

It is a common choice to install a mop pool in the bathroom, but due to the characteristics of the bathroom, the following aspects should be paid attention to when installing the mop pool:

1. The water vapor in the bathroom is heavier, so it is necessary to use waterproof, anti-corrosion, and anti-rust mop pool materials.

2. The toilet must be waterproofed with a mop pool, and it is best to have a drainage slope leading to the floor drain.

3. The tiles on the wall should also be waterproof, because there may be water splashing on the wall during the use of the mop pool.

4. It is best to have windows in the bathroom where the mop pool is installed, which is conducive to ventilation and avoids the mop pool from emitting peculiar smells or breeding bacteria.

There is no mop pool in the bathroom, and there are two ways to consider:

Use a different container. Choose the right size container according to the area you need to mop the floor, and put it in the corner when not in use.

Install a sock shop to put the pool. If conditions permit, a mop pool can be installed to facilitate the cleaning of the mop.

If there is no drain in the bathroom, it is recommended not to open a drain by yourself, because the waterproof layer of the bridge has been done, and a new drain needs to be re-opened and re-decorated.

There is no mop pool in the bathroom, so you can only find a useless bucket to wash the mop, of course, although this bucket is cleaned often, otherwise, dirt will form.

You can go and buy a mop bucket, and there are some mops, even if you bring your own bucket, you can also buy the kind of one. Or connect a hose to the faucet to rinse the mop.

The form of the mop is fixed with a fixed mop pool, and there is no way to use the relatively new and easy-to-use mop that appears at present, so it is recommended that if you want to take care of hand laundry, you can install a wash basin on the balcony, and then make a locker on the balcony to place the mobile mop pool These cleaning items. It is a necessary setting at home, it is very convenient to clean the mop at ordinary times, and it can also be used to clean dirty things such as floor mats. I have installed one on the balcony of my house, and I am discussing whether to install a mop pool on the balcony?

I didn't expect a small mop pool to have such a big controversy, on this issue Fei Mojun asked some housewife friends around him, some friends think it is useful, some people think it is useless, the noise is hot, this is the rhythm of the debate competition!

<>My family now has a mop pool, but the frequency of use is too low, and I don't use it once a year. Who still uses an old-fashioned mop now?! It's all rotary mop, which is very convenient, and there is no need for a mop pool at all.

Most of the house is floored, and it can't be wiped with a mop, so it's basically idle. There is a mop pool, which means that the layout of the water and the water should be reserved, and a small area should be reserved, and now the housing prices are getting higher and higher, and a fixed mop pool is also installed, which is quite overkill.

There is also a function that can wash things that are not convenient to wash in the washbasin, such as shoes, such as foot pads, such as children's feces, diapers and clothes, these things are solved in the washbasin, and I always feel a little bit of that, with a mop pool, it is enough to wash these things that are not too clean. The mop pool is mainly used to wash mops, which is generally installed on our balcony, and can also be installed in the bathroom if there is no limit on the area of the bathroom in your home. Generally, if you are tiling at home, you prefer to mop the floor directly with a wet mop, so a mop pool is also very necessary!

Shelves and hooks can be added to the top to facilitate the placement of detergents and hangers, as well as mops, brooms and rags. For ventilation reasons, the cabinet door can be set up as a louver door to avoid musty odor in the cabinet and keep the balcony tidy.