Can the toilet be installed without leaning against the wall, and what are the disadvantages of the

Toilets. It is the most common bathroom product in everyone's daily life, but people will find that the toilet in many bathrooms is not against the wall, so is it normal for the toilet to be installed without the wall? What are the disadvantages of a toilet not leaning against a wall?

In fact, there is a problem that the toilet does not lean against the wall, usually because there is an error in the size of the purchased toilet and the distance between the embedded pit, resulting in the toilet not being able to stick to the wall. Although this does not affect the application, it is not conducive to the stability of the toilet flush valve, so it is necessary to use structural adhesive when completing the assembly.

Adequately bond the surface of the toilet. In the case of selection, it is necessary to know the toilet pit distance in advance.

size, and then go to buy the toilet product of the corresponding size. Affecting the aesthetics and generosity is one of the key effects of the toilet not against the wall, if the toilet is not against the wall, it can be solved according to the wall. As long as the wall behind the toilet is made 10 cm out, and after making a half-wall, it can not only deal with unsightly conditions, but also can be used to place objects.

If the toilet does not lean against the wall, it will continue to endanger the reliability of the water storage tank, if the water storage tank does not have a wall as a fulcrum, the tap water pipe of the water storage tank will become more and more loose due to shaking, and then the water tank will be opened or the distribution of bottled water will be blocked. Such a thing can be lipid with a stick.

The item plus structural glue is fixed between the surface of the toilet and the wall. The toilet will continue to occupy the total area of the toilet if it is not against the wall, and because the toilet is not against the wall, the seat of the toilet will also be moved relatively forward, which will make the toilet feel narrower for some houses with relatively small room types.

The installation of the toilet cannot be carried out according to its own strength, and it must be carried out according to the professional construction of the project.

The master carries out the assembly, and before the installation and use, it is necessary to carry out the verification and calculation of various standard values. In addition, adequate inspections of sewer pipes and sewage outlets must be carried out. Look at whether there is dirt in the pipeline, whether it will cause blockage, and at the same time check whether the road surface of the toilet installation site is leveled, if there is skew, you must carry out the road level adjustment in advance.

If it is necessary to assemble the anchor screws, a professional sealant must be used and evenly brushed around the drain of the toilet and the toilet should be directed towards the drain. At the same time, in the case of anchor screw assembly, the sealant should also be wiped on the internal structure of the screw, and then assembled, which not only improves the adhesion of the screw, but also ensures the reliability of the toilet. However, if there is a gap between the bottom end of the toilet and the floor, structural adhesive must be applied to carry out caulking to solve the problem of water vapor.

Reasonably isolate from the outside of the toilet.

If the toilet does not lean against the wall, it will also affect the stability of the water tank, if the water tank does not have a wall as a support point, after a long time, the water pipe of the water tank will become loose due to shaking, and then the water tank will leak or the water supply will not be smooth. In this case, you can use a wooden stick and glass glue to fix it between the outer wall of the toilet bowl and the wall. The toilet is not against the wall and will also occupy the area of the bathroom, because after the toilet is not against the wall, the position of the toilet will also move forward accordingly, for some relatively small houses, this will make the bathroom give people a relatively small feeling.

The toilet installation can also be done without leaning against the wall, which will make the steamed toilet very unstable, and there will be a lot of dead ends, which is very troublesome to clean, very unclean, unhygienic, and easy to produce odors.

Yes, it is more troublesome to clean up without leaning against the wall, and it is more wasteful of space, so most people will not choose this way.

You can not lean against the wall, but it is so ugly ......And the water tank is not stable if it is not against the wall, and it is quite occupying a position if it is not placed against the wall. Inconvenience.

When designing the toilet drain, let the front and back of the sewage outlet be about 50 cm away from the wall; When installing the toilet, depending on the location of the sewage outlet, block one and use the other to make the toilet hole spacing relative and the distance from the wall more appropriate. Installation and commissioning of tank fittings. After installation, connect the water source, check whether the water inlet and sealing of the water inlet valve are normal, check whether the drainage valve and the installation position correspond to each other, whether the installation is tight, whether there is leakage, and check whether the length of the button switch chain is appropriate.

<> toilet pit distance. If you don't lean against a wall, you can consider making a toilet.

The transformation of the pit distance to achieve the purpose of leaning against the wall, look at the distance between the toilet hole and the wall, you can also consider building a platform behind the toilet, and the masonry can be about one meter high, so that you can ensure that the toilet is not against the wall is reserved for the pit spacing, or the toilet is selected by the wrong pit distance, so you must measure the distance before buying the toilet, and then choose the appropriate toilet pit spacing for installation.

After the actual is in 305 and 405, when installing the toilet, you can basically lean against the wall, the interval is 1 cm, so there is no need to completely lean against the wall, because if the wall is not very vertical, after pasting bricks, the toilet may not be installed! I hope that after you have installed the bracket for decoration, the installation master will evacuate after explaining the precautions, and then the hydropower master needs to connect the waterway to the water tank in the wall bracket, which is very critical.

It can not be installed against the wall, and it is necessary to leave a certain gap, because it also involves maintenance, connecting the water pipe, etc., against the wall, it will not be able to take over and repair the wall, and the water tank cover of many toilets is protruding outside the water tank, usually about one centimeter. In order to open the lid of the water tank, it is more convenient to have a distance of three centimeters. What's more, the key to the distance of the toilet from the wall is the installation of the water and water joints.

It seems that I didn't see that the toilet was not installed against the wall. Because the toilet is installed in the middle of the obstruction of walking, and in feng shui, the toilet cannot directly face the sanitary door, so people see it, so they are basically installed against the wall to avoid the eyes.

Of course, it can be installed against the wall, so that the installation can save space, and it will also give people a particularly neat feeling visually, so the toilet can be installed against the wall.

When the toilet is installed, it cannot be installed against the wall, and some gaps are studied, otherwise it will be very troublesome when repairing or replacing it in the future, and it will even destroy the tiles on the mountain.

No, leave a gap, because sticking too close to the wall may cause the wall to re-damp.

Abnormal.

There will be hidden dangers when the toilet tank is not installed against the wall. The toilet is not against the wall is the gap between the pit distance and the size of the toilet, although it has been installed, although it does not affect the use, but it is afraid that the water tank is unstable and the water tank is installed in, and the water tank will shake when flushing the water.

It is often due to the deviation between the size of the purchased toilet and the distance between the reserved pit, resulting in the toilet not being able to lean against the wall. Although this does not affect the use, it is not conducive to the stability of the toilet tank, so when installing, it is necessary to fully bond the outer wall of the toilet with glass glue.

Toilet installation precautions.

Before installing the toilet, calculations need to be made, and various accurate measurements need to be made to ensure that the toilet is installed correctly.

To check the drain pipe of the toilet bowl to see if there is a blockage in the pipe, you also need to check the level of the floor, if it is uneven, you need to level the ground first. The sewer pipe also needs to be shortened, but it needs to be at least two centimeters higher than the wall.

During the installation process, the bottom surface of the toilet needs to be glued with glass during the fixing process. However, it is necessary to control the size of the gap between the toilet and the wall, and the toilet products need to be aligned.

The toilet is not against the wall, it is the toilet hole distance you bought is small, the toilet is divided into two kinds, one is 30 hole spacing, one is 40 hole spacing, your hole spacing is 40, and you bought a 30 hole spacing toilet, so it is not against the wall, if there are 10 cm from the wall, it is the store's fault, ask the store to replace the goods, because it is their responsibility to ask the hole spacing, this mistake needs to be responsible for them, if the difference of 5 cm can only be.

It doesn't seem to be normal.,Anyway, I've seen everything that's against the wall.,It's really not like I've seen it installed in the middle.。

It is mounted according to the pit distance. It's not like you can pretend it however you want.

1.The water tank is not stable, and the toilet bowl is not against the wall will cause the toilet lid to have no object to rely on, and it will also speed up the damage of the toilet, and the toilet against the wall can increase the stability of its water tank; 2.If the toilet is not against the wall, you can build half a wall to improve the aesthetics of the overall space; 3.

Occupies space, if the toilet is not against the wall, its position will be moved forward, so that the space in the back cannot be used, and it also occupies the space in the front.

The main disadvantage of the toilet bowl not against the wall is that it is aesthetically detrimental, takes up a lot of space, and can also lead to an unstable water tank, which does not have a wall as a reference point. Over time, the water pipes of the tank will weaken due to shaking, which can lead to leaking water in the tank or poor water supply.

First of all, the toilet does not lean against the wall, which affects the aesthetics, because there is a part of the distance free; The second is that the water tank is unstable, and you also need to find something to support it; Finally, it is a waste of space, because the remaining distance is relatively narrow, and there is no place for things.

The water tank is very unstable, and it also takes up a lot of space, and it is not very beautiful, and it is very unsightly, which is a disadvantage.

The toilet is an important part of the bathroom, and if you want the toilet to be more convenient to use, you need to install the toilet in accordance with the specifications. Generally speaking, when installing the toilet, it will be against the wall, but there are some friends who do not install the toilet against the wall, and they are worried about whether there will be any safety hazards. So is it normal for a toilet to be installed without a wall?

Is it better to have a toilet against a wall or not? Let's answer them one by one.

Is it normal for a toilet to be installed without a wall?

It is not normal for the toilet not to be against the wall, often due to the deviation between the size of the purchased toilet and the reserved pit distance, resulting in the toilet not being able to lean against the wall. Although this does not affect the use, it is not conducive to the stability of the toilet tank, and at the same time, the toilet is installed in the middle of the hindrance of walking, according to Feng Shui, the toilet can not directly face the sanitary door. Therefore, the toilet is basically installed against the wall.

Generally, when installing the toilet, the outlet at the bottom and the drain are not aligned, and the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unblocked, and the water level of the toilet tank is not high enough to affect the flushing effect. Sometimes after a little time in the sewer, the hair in the bathroom will hang on the wall of the pipe and accumulate too much, which will cause blockage, and the hair will generally cause the toilet floor drain to be blocked, the washbasin to be blocked, the bathtub to be blocked, and the shower room to be blocked.

Is it better to have a toilet against a wall or not?

1. The toilet is against the wall to stabilize the water tank.

If you are worried about the shaking of the water tank, you can use a small piece of wood between the water tank and the wall tiles to hold it up and fix it with glass glue, which is conducive to the stability of the water tank.

2. The toilet is more beautiful against the wall.

Because buildings require that the roof of the ground cannot be moved, the water pipes of the toilet are generally open pipes. The several water pipes behind the toilet are exposed, which is very aesthetically pleasing to the eye.

3. Do enough preliminary preparation to avoid toilet installation not against the wall.

Before the toilet is installed, the necessary water and electricity seats should be reserved, and it is best to plan the products in the functional area on the drawing. This is enough to prepare, and the later installation effect will definitely be good.

To sum up, it is not normal for the toilet to be installed against the wall, because generally speaking, the toilet is best when it is installed against the wall, this is because if the toilet is not installed against the wall, it will cause the water tank to be unstable, and it will also take up space in the bathroom, so the decorator will recommend that everyone install the toilet against the wall. If you want to know more about toilet installation, you can pay attention to the consultation here.

Is it OK if the toilet is not against the wall?

After the toilet is installed, it is found that the toilet is not against the wall, is there a hidden danger? The toilet is not against the wall is the gap between the pit distance and the size of the toilet, although you have installed it does not affect the use, but you are afraid that the water tank is unstable, you can use small things such as wooden sticks and glass glue to fix it between the outer wall of the toilet and the wall tiles. Therefore, when you buy a toilet in the future, you must not buy a toilet that is smaller than the pit distance, otherwise it will definitely not be erected against the wall.

How to remedy the toilet not against the wall?

Remedy 1: Replacement. Go to the merchant to replace a new toilet, but some merchants do not give it a replacement, and the freight generated back and forth also needs to be borne by themselves, but the exchange is the best way.

Remedy 2: Build a wall. If you must use this toilet with a small pit distance, the problem is that the back of the toilet is not against the wall, which is not too beautiful.

If the bathroom is large, the toilet can't lean against the wall, so you can let the wall lean against the toilet, for example, the wall behind the toilet is made 10 cm, and the half wall can be stored.

Remedy 3: Shift. The toilet shifter can change the distance of the toilet pit, but it is not recommended to shift, it is easy to clog in future use, and it is only used when there is really no way.

How to remedy the toilet not against the wall? If you still want to know more about decoration consulting, please click to enter the decoration knowledge channel.