Where are the scrap products used after they are acquired?

I believe that there will definitely be a scrap collection station near you from a young age, and when there is unwanted waste at home, you can exchange it there for a little money. So have you ever wondered what these scraps sold to scrap yards will end up in? The scrap station also needs to make money, so how to use the waste products it collects?

There are many types of waste, such as metal, paper, plastic or other industrial waste. Each of these different types of waste has its own different uses, so let's talk about a few. 1.

Metals. If it is a large quality and thick steel material, such as steel plate, steel bar, etc., generally speaking, it will be directly purchased by some manufacturers of steel, which is not only very cheap, but also not bad quality, which is needed by manufacturers in large quantities. Generally speaking, there is no essential difference between scrap steel and different steels, and they are all materials that can be used normally.

If it is waste production equipment, such as machine tools, etc., machine tools are mostly made of metal, generally speaking, there are such waste machine tools will be directly refurbished and then sold or used, machine tools are very sought-after scrap products, because most of the waste machine tools can be reused, saving a lot of money to buy new machine tools. If it is a can, this kind of material is generally made of aluminum, and generally speaking, it will be all ** back and remade into aluminum. If it is scrap copper, it will also be directly returned to copper smelting.

Plastic materials are also a large type of waste. There are mainly plastic bottles, and plastic bottles are also used for many purposes. 1.

Plastic bottles can be made into a fibrous material through chemical reactions, which can be used to fill quilts, etc., and the properties are very similar to cotton. There are even technologically advanced places that can turn plastic bottles into a material for weaving clothes. 2.

Plastic bottles can also be made into fuel. <>

In short, no matter what waste products have their own uses, especially the development of high and new technology, these waste products can be turned into very valuable industrial raw materials, which not only protects the environment, but also stimulates the economy, which can be described as killing two birds with one stone.

After the waste is purchased, it is reprocessed in the construction industry and the restaurant industry to make other useful products for use in society.

Actually, after these acquisitions, they all went back to the place where they used to make them, so it's very good.

After the waste products are purchased, some of them are reprocessed and reused for the second time. Some waste products are used as next-grade raw materials.

In fact, after the waste is acquired, it is used in a lot of places, and some of the waste utilization of environmental protection equipment is used to purchase waste products, which can be used to make a lot of environmental protection items.

1.Scrap products are generally sold to those who are processed in the first place, and those factories are in the first place to produce. You need to find a local ** processing plant.

2.Waste products, a paid waste treatment and life service, are purchased by professional and regular waste stations or companies, and then the waste is scientifically treated and classified to meet the standard of recyclability. 3.

Waste products** play a positive role in protecting the environment, saving energy and driving social benefits.

Legal analysis: According to the provisions of the "Measures for the Administration of Public Security in the Scrap Metal Acquisition Industry", these items are prohibited, and the first category is firearms, ammunition and ** items; The second category is highly toxic and radioactive materials and their containers; The third category is special equipment such as railways, oil fields, power supply, telecommunications, mines, water conservancy, surveying and urban public facilities; The last category is the stolen goods or items suspected of being stolen by the public security organs.

Legal basis: "Measures for the Administration of Public Security in the Scrap Metal Acquisition Industry" Article 9 Enterprises and individual industrial and commercial households that purchase scrap metal shall not purchase the following metal items:

1) Firearms, ammunition and ** items;

2) Highly toxic or radioactive materials and their containers;

3) Railways, oil fields, power supply, telecommunications, mines, water conservancy, surveying and urban public facilities and other special equipment;

4) Stolen goods or items suspected of being stolen by the public security organs.

To apply for a business license first, you must first go to the public security organ to apply for a special industry business license, and check whether it meets the relevant conditions for start-up. After the approval of the public security organ, you can go to the local industrial and commercial department to apply for a business license.

1. There is no formality, as long as the scrap ** station is written with a signboard inside the door, which is large and eye-catching, so that people passing by the door can see it and put it outside to affect the city's appearance.

2. **According to the market**, because the prices in different regions are different, you can use the information transmission between peers, or you can check it online.

Want to open a scrap station, but sell the scrap you receive?

Sell a packing station;

The waste paper ** link is generally like this: individual merchants, small and medium-sized enterprises, waste ** station, packing station, paper mill.

How do I find a packing station? There are several ways to do this:

2. Ask peers, but most bosses don't tell you;

3. Find a tricycle or small truck pulling waste products to follow him to see him go to sell;

4. Do Bang Bang** We will directly help you connect with the packing station;

How much money to charge, according to the market**, the market changes every day, and it will be updated every day;

How much to sell, is to find the packing station to communicate;

Therefore, it is not difficult to open a scrap station, but the difficult thing is to make up this determination and not be able to let go of this business;

If you want to open a scrap station, you can find us

Want to open a scrap station, but sell the scrap you receive?

Sell a packing station;

The waste paper ** link is generally like this: individual merchants, small and medium-sized enterprises, waste ** station, packing station, paper mill.

How do I find a packing station? There are several ways to do this:

2. Ask peers, but most bosses don't tell you;

3. We will directly help you connect with the packing station;

How much money to charge, according to the market**, the market changes every day, and it will be updated every day;

How much to sell, is to find the packing station to communicate;

If you want to open a scrap station, you can find us

This industry is still okay and worth doing;

Waste products are accumulated into a lot, slowly accumulated, mainly by the receipt of waste products, classification, **and the sale of **different, from the middle to earn the difference, door-to-door collection of waste, will not be so fine classification directly according to the packaging ** take away, back to the store you are classifying, so earn more difference.

Where is the profit point of the scrap station?

1 Scrap price difference

There are many things that are received at a low price and sold at a high price, so you have to consider your own eyesight and understanding of waste products;

Customers don't know the **** in the packing station and the waste factory, the number is relatively small, the waste station is directly connected with the large packing station or factory, and the price difference is earned;

2 Classification and dismantling

There are a lot of waste products to be classified, ** is different, most of the door-to-door receipts are packaged and collected directly, there is no way to subdivide, unless he is divided into his own categories, this kind of words understand a little;

Paper: yellow paper (cartons), flower paper, book paper, newspapers, miscellaneous paper.

Metals: aluminum products (such as cans), pure aluminum, brass, copper, iron (thin iron sheet), iron (thick iron plate, iron block), stainless steel.

Plastics: woven bags (white), knitters (variegated), plastic bottles, foam boards, plastic baskets, tires (wire tires), tires (wire tires).

A piece of paper can be divided into several categories, and each type of ** is also different.

Some instruments or electrical appliances are several times different after being disassembled, and some of the electrical appliances have copper, iron, aluminum, etc., and you disassemble them and sell them to the packing station, don't you make more money.

3 Used goods

Some companies move, and some of the things that can't be taken away are directly sold as scrap;

You can take it back to see how good the goods are, some of them are relatively new, and they can be used as second-hand things, and earn a part of the profits, which is also considerable!

There are some customer needs, it is not cost-effective to buy a new one, so go to the second-hand market, or the scrap station to buy, you can save some money, and the scrap station also sells a little higher than the scrap!

When people talk about it, they always associate it with dirty mess. And it's a profession that most people don't want to do. However, what is the efficiency of the waste industry, many people have not carefully calculated the accounts.

Hello, (1) Where is the sales of the scrap station? The waste products of the acquisition of waste products are diverse, and they can be industrial production wastes or domestic production wastes. Different waste products need to be sold to different terminal merchants according to their material, and in general, there are four categories of waste products purchased by the scrap station

1. Scrap iron and steel 2, scrap copper, scrap aluminum, non-ferrous metals 3, plastic products 4, waste paper cartons. Among them, scrap iron needs to be sold to scrap iron processing plants, or resold to local surrounding furnace markets. When selling scrap iron, it is best to choose a more reliable processor, which can establish long-term cooperation so that you can control the timely scrap iron and steel information.

Scrap copper scrap aluminum non-ferrous metals need to be sold to the local scrap non-ferrous metal market, if the amount is large, you can contact the non-ferrous metal smelter. **Relatively high sales, but copper scrap aluminum non-ferrous metals are usually not purchased much, and under normal circumstances, these waste materials are sold together after many years. Plastic products are sold to plastic pellet factories, there are many types of plastics, and they require waste products to have a certain amount of experience.

Waste paper is sold to waste paper baling factories, etc., so I will not elaborate here. (2) How to find the source of waste products? Many scrap collection sites have a dismal business and don't know how to find sources.

Daily waste is limited, and many people who are engaged in waste work are thinking about how to find the source of supply, so how to find the source of waste products? Engaged in waste products, remember not to guard the site and wait for the waste to come to the door, we must attack in many ways, to take the initiative to find the source of goods, you can establish contact with the surrounding factories, shopping malls, hotels, hotels, supermarkets, entertainment venues, construction sites, etc., with efficient service and high-quality cooperation to establish cooperation, stabilize customers, and establish long-term cooperative relations. These are all ways to find sources.

3) The scrap business is not good, how to make money in other ways, if the scrap business is still bleak for a long time, you can consider improving the business model from other aspects. For example, with waste products and processing as a whole, purchase some scrap steel equipment, deep processing of waste products, and sell the processed waste products directly to the terminal by contacting the steel mill, so that two links are reduced in the middle, and a lot of profit margins can be improved. Regarding waste plastics, plastic crushing equipment can be purchased, which is not expensive, but it can save a lot of trouble for downstream plastic pellet factories, and it is relatively high.

China Scrapyard argues; In fact, no matter what industry it is, there are profits and losses, as long as you find the pain points of the industry, you can start from the pain points and find the profit points of the industry. Waste products need to be operated by the best personnel and find the differences from the majority of acquisition sites in order to stand out from the many sites.

Scrap items can be sold at the packing station.

Scrap ** items can be sold to the packing station, and they will be sold to the packing station. Yes.

Common Waste Processes** (Take Waste Paper as an Example):

Individuals, merchants, small and medium-sized enterprises, riding three wheels**, scrap** stations, packing stations, paper mills.

Now there are fewer people riding tricycles, and most of them have opened a scrap station near the pure touch community, and the more goods are pulled to the packing station to sell.

Find a way to pack your station.

2. Ask your peers.

3. Follow some of the cars of the same peers to see if he pulls the <> to the first to sell

3.Actively looking on the street, it takes a long time and has a high accuracy rate.

4.You can find a professional factory in the area, there is plastic waste, you can find a plastic granule acquisition manufacturer, or some plastic products factories have also acquired, hardware waste products are in the hardware waste station or hardware renewable resources acquisition manufacturers, as long as you are more careful to find, analyze and compare, you will find a suitable acquisition manufacturer.

How to find a manufacturer of scrap products, there are the following methods:

1.It is possible to find a waste disposal plant by contacting him and asking about the person who came to deliver the waste.

3.Actively looking on the street, it takes a long time and has a high accuracy rate.

4.From looking for professional factories in the region, if there is a plastic waste product, you will find a plastic granulating acquisition manufacturer, or some plastic products factories have also acquired, as long as you are more careful to find, analyze and compare, you will find a suitable acquisition manufacturer.

The above are a few ways to find a manufacturer of scrap products, I hope it will help you.