What to do after clicking wipedate

After shutting down, press the small house button and press the power button at the same time, and the recovery interface will pop up.

Usually in the third or fourth line we can see the wipe option, and there is the wipe data cache option in it.

wipe=wipe data=data cache=cache.

This step is to delete the residual values on the phone to avoid data conflicts affecting the flashing and causing system paralysis.

2. After waiting for the successful connection, click the applicable tool at the top of the software.

4. Then in the pop-up page, select the file that was extracted beforehand.

5. Then wait for the third-party recovery to be completed, you can use the flashing wizard to enter the recovery mode, or you can manually enter to verify whether the flashing is successful.

1. Turn your phone off.

2. Press and hold the up and down volume keys and the power button at the same time3. In the interface that comes out, press the key to select "recovery" to select, and then press the up button to confirm4. Wait until the triangle symbol appears, and then press the up and down volume keys at the same time5, your phone will enter recovery mode.

6. Press the volume button to select the "wipe data factory reset" option, then turn on the key to confirm, select "yes delete all user data" on the pop-up page, and then press the power off button to confirm the wipe operation.

7. In addition, the "wipe data factory reset" option can also clear the data and restore the factory settings, if the two options are operated in turn, it is the legendary double WIPE.

We apologize for the inconvenience caused.

The following is an explanation of the Chinese and English menus in the commonly used recovery main function interface, please refer to:

reboot system now: Reboot the phone (select this option to reboot the system after flashing).

Wipe Data Factory Reset: Erase user data and restore to factory settings (an option that must be performed before flashing).

wipe cache partition: clear the system cache (executed before flashing) (you can also try this option if there is a problem with the system, which can generally be solved).

install zip from sdcard: installs a zip upgrade package from an sdcard (you can run a zip upgrade package with any name regardless of the name of the update package).

Backup and Restore: Backup and restore the system (the function and principle are similar to the one-click backup and restore of chost on the computer).

mounts and storage: mounts and storage options.

advanced: advanced settings.

Select yes to execute the current Shuangqing command.

If you can't complete it by yourself, please take the time to consult the local Lenovo after-sales maintenance site and inquire about the official after-sales site.

After selecting factory reset, there will be an interface for you to choose,After selecting yes, it will be cleared,You can wait for the phone to restart after three clearing,But I usually pull out the battery board directly after a while to restart,There is nothing wrong with the test,Can't pull the power board or don't want to try to wait for the phone to get it right。

The battery is removable and the battery is not removable and has been restarted You have an error in the system, but there is no need to flash the machine.

...What is the problem with the database? Misclassified. The question you are asking should be related to flashing.

When you say wipe data factory reset, you're talking about the double-clearing process.

Are you ready to flash your phone? Let's popularize it for you.

Card swipe: 1Install the driver of the phone on the PC, and use the tool to make your phone successfully recovered;

2.Save the flashing package to your phone's SD card.

3.Enter the recovery of the phone, double clear. "That's what you do".

4.After double clearing, move up and down through the volume button of the phone to find the flash package you put in the SD card before,(It is usually an update start.)

zip file) click on that update package to flash it.

Pay a Huawei C8650 card swipe tutorial:

Line swiping: The first three steps are basically the same as card swiping (note: if it is not the official bottom package, some mobile phones do not need recovery, such as LZ's Motorola XT889 brushing the official package is not used recovery).

After double clearing, connect the PC with a data cable, and then use the line brush software on the computer to complete the flashing, you can refer to the method of brushing the bottom package of the XT889 of the Anjike Forum for specific methods.

Mobile phone tablet computer engineering mode refers to the machine background software addition, change, delete and other actions of the operation state, self-operation is easy to cause the instability of the mobile phone tablet system, if your mobile phone tablet computer problems, it is recommended that you send the machine to the Samsung after-sales service center, by the engineer to help you check and deal with.

Wipe Data Factory Reset to erase data and restore factory settings (used when flashing your phone.) ）wipe

English [wa p] American [wa p].

vt.Wipe; Eliminate; Painted.

vi.Wipe; Beat.

n.Clean; Hit hard.

Past tense wiped past participle wiped present participle wiping ].

Bilingual example sentence: here she interrupted herself to wipe her glasses

Reading this, she stopped to wipe her glasses.

Setting to stop running·· Either you deleted the system software by mistake!! Either there is too much memory garbage, clean up the cache first, if it doesn't work, just flash the machine to solve it.