What is the UL sample delivery process and what is the UL certification process in the electrical in

The engineer arranges a sampling plan and prepares a list of required information. 4.Prepare samples, send samples, and submit the required documents.

The engineer reviews the data and starts testing. 6.After the test is passed, the UL engineer will issue a report, and the case can be closed after the report review is completed.

7.The use of the UL mark is approved, and there will be a factory inspection in UL (in the case of related product production, generally once a quarter). Satisfied.

1. Fill in the application** (can be obtained from UL Meihua), and send it to UL company together with the production drawings 2, UL company will carry out ** according to the information.

3. Confirm**.

4. Send samples for testing.

5. Issue the test report and list it on the UL network, if the product passes the test 6, the factory audit will be carried out, and the UL mark can only be affixed and exported after passing the factory audit.

7. Supervision and audit will be carried out every year in the future, generally four times a year.

Pleasant about** Ganjiakou Sports, the user uses a Community Chest Sports, one by one.

Cheque reversal means that you go directly to the payer's bank and ask for the money to be transferred to the payee's bank. In this way, it is not very convenient for you, and you have to find his opening bank, that is, someone else gives you a check, and the payee is you, and you do not deposit in your opening bank, but go to his opening bank to ask for a reverse deposit. The reverse deposit will arrive in the morning and the account in the morning, and the afternoon deposit will arrive in the afternoon, which is half a day faster than the regular deposit.

In fact, the paying bank directly transfers the money to the beneficiary bank.

Sending is also depositing, this kind of much, because you generally go to your nearest bank to open an account, you take the check to your bank to deposit the check, your bank needs to hand over the check to the payer's bank through a special person in the exchange place (in the People's Bank of China), and the payer's bank will transfer money to your bank, one more time to transmit the ticket, so it is half a day slow.

Positive delivery means that you receive a check from the customer, affix the bank seal and fill in the double long bill and send it to the bank, you are the recipient.

To send means that you want to pay the customer to issue a check, fill in the name of the payee as the other party, fill in the triple bill and send it to the bank, you are the payment.

The process of UL certification does not need to do the type test first, first provide information for audit and evaluation, determine the cost and then send samples to test the test report.

Witness sampling refers to the process of sampling experimental samples from the inspection objects on site by the full-time material testers of the construction unit for the relevant building materials entering the construction site under the witness of the construction supervision unit.

Procedure for Witnessing Sampling:

1) The sampling and inspection personnel shall be qualified personnel of the construction unit, and the sampling and sample delivery witnesses shall be authorized in writing by the construction unit and 1 2 qualified construction or supervision personnel shall be appointed. The construction unit shall submit the "Authorization Letter of Witness Unit and Witness" to the quality supervision station and the engineering inspection unit under the supervision of the project.

2) When the sampling personnel of the construction unit conduct sampling of raw materials and construction test projects on site, the witnesses must be present to witness. The witness shall supervise the sample, and hand over the sample to the inspector together with the sampler or take effective measures to seal the sample and send the sample.

3) When the testing unit accepts the entrusted inspection task, the inspection unit must fill in the entrustment form, and the witness shall check the signature on the entrustment form.

4) The testing unit shall indicate the name of the witness unit and the witness in the remarks column of the inspection report, and notify the witness unit when the sample is found to be unqualified. Fill in the form requirements: the test report should be printed by computer; The test report adopts the provincial unified table; The test report must be signed by hand; The test report should have a unified format with a special chapter of "witness inspection"; Indicate the names of the witnesses.

Sampling is the process of extracting experimental samples from the inspection (or testing) objects in accordance with the provisions of relevant technical standards and specifications; Witness sampling and inspection system refers to a procedure in which the relevant building materials entering the construction site are sampled or made by the full-time material test personnel of the construction unit on site and sent to the laboratory that meets the requirements of qualification management for testing under the witness of the construction supervision unit or the construction unit.

Procedure 1: Authorization.

The construction unit or the supervision unit of the project shall submit the "Authorization Letter of Witness Unit and Witness Personnel" to the construction unit, the project supervision station and the engineering inspection unit. The power of attorney shall indicate the project witness unit and the name, certificate number, and witness number shall not be less than 2 witnesses.

2. Sampling. When the sampling personnel of the construction enterprise take and make samples on site, the witnesses must be present to witness, and the samples should be supervised, and effective sample sealing measures should be taken together with the personnel entrusted to submit the samples for inspection or the samples should be sent to the testing unit.

3. Submit for inspection. When the testing unit accepts the entrusted inspection task, the inspection unit must fill in the entrustment form, and the witness shall present the "Witness Certificate" and sign the inspection entrustment form. Testing units are required to implement a password management system.

4. Test report.

The testing unit shall affix the seal of "witness sampling and inspection" on the inspection report. In the event of unqualified samples, it should be reported to the quality supervision station within 24 hours, and the unqualified project account should be established.

5. Report collection.

The first situation: the inspection results are qualified, and the construction unit will receive the report and sign for registration.

The second situation: the inspection results are unqualified, and the test unit notifies the witness to report to the supervision station. The test report will be collected by the witnesses.

The witness sampling and inspection system refers to the self-inspection of the contractor according to the regulations, and under the witness of the test and testing personnel of the construction unit and the supervision unit, the construction personnel will take samples on site and send them to the designated unit for testing. Witness the procedures for sampling and submission:

1. Sampling: construction unit: material sampling and specimen production. Witness personnel: witness the sampling of materials and the production of test pieces; marking the specimen or its packaging; Fill in the "Witness Record Ledger";

2. Inspection: the process of handing over the specimen from the site to the test unit after sampling;

3. Receiving mail; 4. Test report: The test report should be printed by computer; The test report adopts the provincial unified table; The test report must be signed by hand; The test report should have a unified format with a special chapter of "witness inspection"; Indicate the names of the witnesses.

5. Report collection.

Witness the procedure for sampling and delivery.

1. The construction unit shall submit the "Authorization Letter of Witness Unit and Witness" to the project supervision and quality supervision station and the engineering inspection unit. The power of attorney should indicate the name of the witness unit and the witness entrusted by the project site and the number of the "witness certificate", so that the quality supervision agency and the testing unit can check and check.

2. When the sampling personnel of the construction enterprise conduct raw material sampling and test block production on site, the witnesses must be on the side.

3. The witnesses should supervise the samples, and send the samples to the testing unit or take effective measures to seal the samples together with the sampling personnel of the construction enterprise.

4. When the testing unit accepts the inspection task, the inspection unit shall fill in the entrustment form, and the witness shall sign the inspection entrustment form.

5. The testing unit should indicate the name of the witness unit and the witness in the remarks column of the inspection report, and in the event of unqualified samples, the first thing to notify the project supervision station and the witness unit is to be notified.

The supervision witness sampling must first obtain the qualification of the supervision engineer, and then the construction department shall register and issue the supervision engineer to witness the sampling and inspection seal, and be responsible for the sampling and inspection of raw materials at the construction site. The procedure is that after the raw materials of the construction unit arrive at the site, the construction unit shall report to the supervision unit for inspection, and the construction site supervision engineer shall conduct on-site sampling inspection of raw materials according to the specifications, and fill in the raw material witness sampling record, and the construction unit and the supervision unit shall jointly send the raw materials to the qualified and filed laboratory for re-inspection.

Go directly to the prison warden...

The easiest thing to do is to use something similar to phpcms, and take a little time to learn how to use the tags inside, the general process:

1.In C:Wamp www phpcms templates, copy the default folder and rename it to campus

2.Go to the backend, Template Style - > the template scheme, and set campus as default.

3.Copy the **, flash, and stylesheet files required for static pages.

c:\wamp\www\phpcms\templates\campus\skins\default

4.In the background, find the admin template and back up the files.

5.Open the static homepage in DW and divide the page into three parts, copy the header part to the middle, copy the footer part to the middle, and copy the middle part to the middle. Note:

When copying to Medium, the first and last lines of the original are retained.

6.In the header file, where the CSS style is linked, add it before the path of the link.

Find it in the backup header file and add this sentence to the head tag in the header file.

Below. This setting ensures that the style is displayed correctly.

7.Add columns and sub-columns in the background against static pages, and add articles in each sub-column.

1) Find the block where the navigation is located, delete the li in ul, and replace it with the following two lines**.

Home. 2) If you add a style to li, you can add it in front of each item.

Home. News.

Campus. Among them, news and campus are the English directory names of the columns.

9.Remove the content from the page and replace it with a tag. The function of tags: call data from the database and display the data to the location where the tag is located.

There are 4 types: 1).The column position is empty, which is a global label that indicates that the data is being called from the entire database. Like what.

2）.The column position is a specific value, which means that the data is called from the column with the ID number of that value. Like what.

3）.The position of the column is the variable $catid, which means that with the different columns, the label calls the content according to the different column ID numbers.

Like what. 4）.The position of the column is the variable $cid, which means that with the different sub-columns, the label calls the content according to the ID number of different sub-columns.

For example: ps: The above operations can make the home page display normal, the data is dynamic, and the navigation is easy to use.

10.Modify the article section page.

The name of the subsection.

Swap out the style inside for a style of your own design.

11 Modify the article list page.

Home. 12.Modify the article content page.

Home. Reading this article requires consumption.

Dot, are you sure to check it out?

You don't have permission to read it.

The foreground is the interface.

Behind the scenes is the database.

Database software such as SQL, Oracle, and Access are used in the background.

It can be connected by certain commands.

It is recommended that you use the CMS system, which is most suitable for people who do not understand the program but will know the page design to build a website, to search for a lot of CMS systems to provide**, most of them are written by PHP programs. At present, the more mainstream ones are: Dream Weaving, Empire, phpcms, php168, etc., and the corresponding ** tutorials can also be found on the Internet.

Meaning no'abo_'This file, on line 80 of the qx file, look for it to see if it exists'abo_', change the path on line 80 of the qx file, or delete it.