What toys hamsters play with their own ways to make them

Waste utilization transformation hamster ultra-silent running wheel DIY hamster toys homemade.

Friends who raise hamsters know that hamsters like to play with running wheels, how boring it is to buy one, make one for SS yourself, it doesn't cost money and it's interesting. Today shared the evening with the runner of the exhaust fan and the bearing of the air conditioner remodeled. The bearing of the exhaust fan can also be done!

Turn on step-by-step reading mode.

Tool material: exhaust fan blade, bath bomb can also be. I made two of them, one of which is in the bath bomb.

Old air conditioning bearings, other old things can also be used. How it works:

I cut the bearing that I took off like this.

This blade cleans all the fittings.

Insert the bearing into the center of the rotor to see if it fits. If the hole of the leaf is small, it is necessary to drill a little bigger.

Tie the bearings to the cage with cable ties.

Install the rotor blade from the cage, if it is too loose, it will fall off when running, you can use a cable tie to tie the front of the bearing, as shown in Figure 2 below, Figure 3 can see that the tightness of the hole is just right, so there is no tie belt, Figure 3 is the rotor blade removed in the old bath bomb. The rotor blade in the exhaust fan is a bit small for a fat hamster, because the circle in the center occupies the position, and the rotor blade in the bath bomb is just right. Some people are worried that the SS will clip the foot, and the 5 SS in my house have been used for a month, and they have not been injured or clipped.

0 unhelpful. How it works:

How it works: Click on the table of contents to quickly jump to the corresponding location on the page.

01Cut the removed bearing like this.

02 This blade dismantles all the accessories.

03Insert the bearing into the center of the rotor to see if it is suitable. If the hole of the leaf is small, it is necessary to drill a little bigger.

04Tie the bearing to the cage with cable ties.

05 install the rotor blade from the cage, if it is too loose, it will fall off when running, you can use a cable tie to tie the front of the bearing, as shown in Figure 2 below, Figure 3 can see that the tightness of the hole is just right, so there is no tie belt, Figure 3 is the rotor blade removed in the old bath bomb. The rotor blade in the exhaust fan is a bit small for a fat hamster, because the circle in the center occupies the position, and the rotor blade in the bath bomb is just right. Some people are worried that the SS will clip the foot, and the 5 SS in my house have been used for a month, and they have not been injured or clipped.

There are so many things that can be hamster toys, such as running wheels, hamster swings, running balls, pipes that can be drilled, hamster lookouts, seesaws, hamster spiral ladders, and so on. There are many hamster toys that you can buy in the market. Of course, it's easy to make your own toys for hamsters.

Make a simple toy for a hamster, sometimes using local materials will do. For example, paper rolls that have run out of toilet paper, small balls, chewing gum, wooden sticks, etc., can be thrown directly to hamsters to play. Of course, if you have enough time, you can also make some beautiful toys for hamsters, and a search on the toy will bring up a lot.

Of course, parents can also use their own image and creativity to make some unique toys for hamsters.

Prepare an old drink bottle, scissors, tape.

Use a marker to divide the head and the bottom of the bottle first, and then divide the middle into three equal sections.

Remove the mouth and bottom of the bottle, and cut the middle into three sections.

Use sandpaper to polish the two sections of the cut, so that you won't scratch your hands and won't hurt the hamster.

One way to do this is to paste the three side by side.

You can also put two sections on the bottom and one on the top and paste them with tape. The hamster toy is ready, easy to learn.

Hamsters' favorite toys are molars, pipe mazes, running oak wheels, ladders, seesaws, and more.

1. Molars.

Molar is one of the most functional hamster toys, it can help hamsters solve the problem of long teeth, and most hamsters are also very fond of using this toy. This toy can save the breeder the trouble of feeding grinding teeth food every day, and it is recommended that the breeder buy it.

2. Pipeline maze.

The pipe maze is a very interesting and cautious hamster toy, which is more suitable for hamsters with a strong desire to explore, and is not recommended for lazy hamsters such as pudding hamsters, because they may be trapped inside and unable to get out.

3. a running wheel. The running wheel is a very practical hamster toy, which can bring happiness to the hamster and help the hamster exercise. However, for lazy hamsters, the usage rate will be very low, and it will also cause a certain amount of noise when using hamsters, and breeders need to be cautious about buying.

4. Climb the ladder. This kind of hamster toys can meet the interests of some hamsters who like to climb and climb high, such as purple-clothed hamsters, etc., which are more suitable for buying this kind of toys.

5. a seesaw.

The seesaw is suitable for multiple hamsters in the same cage, and may need to be taught how to play by the keeper when they are first placed, so that they can play on their own.

You need to prepare: plastic bottles, scissors, markers, glue, the specific steps are as follows:

2. Then use a marker pen to divide the head and the bottom of the bottle first, and then divide the middle into three equal sections, as shown in the figure below.

3. Next, remove the mouth and bottom of the beverage bottle, and cut the middle one into three sections, as shown in the figure below.

If you want me to say, it's best not to use plastic bottles to make toys for hamsters, because if the toys made of plastic bottles are not properly disposed of, it is easy to scratch the little hamsters, and if you have to do it, it is best to wrap tape around the edge.

Use a larger plastic bottle, cut all the openings, and make a slide, or seesaw!

Material preparation: plastic bottles, ribbons, crepe paper, sticky notes, tape.

Directions: 1 in the mouth of a plastic bottle.

Make colorful hair for dolls with streamers.

2 Use sticky notes to cut out the head, facial features and body of the doll, and then paste it on the plastic bottle.

Make improvised toys for hamsters. Toilet paper rolls are hollowed out on some patterns, and a few beams of paper rolls can be connected together, and the oak banquet is changed to play Toys similar to pipes, simple, fun, cheap and good.

Hamster toys recommended. 1.Running wheels are essential.

A wild hamster runs several kilometers a day. If the hamster does not run the running wheel for a long time, it will cause a cage stall. So the running wheel is very, very auspicious and important.

The toys below can be bought or not, but running wheels are a necessity.

2.Hamster swing. Watching Liang Juan rat swaying on it, you can pass the time when you are bored.

3.Hamster seesaw. Although I don't know how to play, it's still quite fun to crawl east and west.

4.Hamster pipes. Connecting a lot of pipes together, it's like walking a maze, and it's a pretty good oak banquet.

Small toys for hamsters small crafting:1. First prepare an old drink bottle.

2. Then use a marker pen to divide the head and the bottom of the bottle first, and then divide the middle into three equal sections.

3. Next, remove the mouth and bottom of the bottle, and cut the middle into three sections.

4. Finally, paste the three side by side, so that the hamster toy is completed.

Handmade was originally a verb phrase, but crypto has gradually come to be used as a noun to refer to some do-it-yourself fun small projects or handmade projects. With the continuous improvement of people's cultural life standards and the higher and higher requirements for spiritual and cultural life, handmade, creative DIY and its related surrounding industries are becoming increasingly prosperous, and more and more people are beginning to think about how to integrate handmade DIY into life.

Some traditional Chinese handmade items such as paper-cutting, handmade cloth and so on are deeply loved by foreign stoves and imitations, which has also given birth to the increasing prosperity of the domestic handicraft industry, some handmade small workshops continue to grow, many have started import and export business, and have made great contributions to improving domestic employment rate and promoting economic development.

According to the texture of the beads, it can be divided into glass, bone,, ceramic, crystal, imitation gold, wood and other types, and its shape is even more varied: beads, cylindrical, animal shapes, polygons, totem images, etc., DIY jewelry stores advocate their own production.

Toys needed for hamsters: molars (used to grind teeth, rodents need to put socks and branches to put their teeth too long) running wheel (used to exercise, maintain physical function, and maintain a healthy body) Items needed to raise hamsters:

1. Professional rat food or bread worms, raw melon seeds and other foods.

2. Hamster cage (sorting box).

3. Hamster Running Wheel (Running Ball).

4. Hamster bathroom and bath sand.

5. Sawdust, kettle and food bowl.

6. His life goods (optional).

Toy. Half of this is for the sake of good looks, in fact, many hamsters don't like to play with toys. Again, barrel-like toys must pay attention to the size. Many barn filial piety rats have the ability to hang ropes, so you might as well tie a rope in the rat cage.

Molars, ice packs, cooling plates. These are life-improving purchases, depending on the situation. Some hamsters don't actually use molars at all, but prefer to bite the cage. So it's normal to buy it home and not use it.

Bamboo vinegar. When it is hot, the hamster cage can be disinfected to remove the smell.

Running wheels large enough. The hamster exercises very, very, very, very large, and it can't be satisfied just by teasing it every day. If you have ever raised it, you will know that every night the hamsters are running on the wheel section of the brigade, basically never stopping.

So running wheels can meet their needs. At the same time, it is important to note that the running wheel is large enough, and a running wheel that is too small will compress the hamster's spine and make it easy to burp.

Teething supplies. Food alone can't solve the problem of hamsters' teeth growing wildly every day, so teeth grinding is a must.

And different hamsters have different personalities, some like teething sticks, some like teething stones, some like to gnaw cages, some like to gnaw wooden boards, my family especially likes the small branches picked up by the roadside emmmm...

Enough litter. Hamsters like to drill holes and dig soil, and every night in my house they either run wheels or tear paper to destroy it. . .

In winter, it is recommended that a thick layer of sawdust is sufficient, and in summer, because of the high temperature, it is recommended to use a paper towel with small dust and cut it into small strips and throw it in.

Heat sinks. Because it's summer, you don't need to let hamsters stay in an air-conditioned room, but if you're outside, you need a radiator, or you can use marble and stone flakes instead.

The subject can also choose Hu Dan or not, but it must be placed in a cool place, and then sprinkle enough water on the ground, and put the cage on the water. Just sprinkle water if you're fine.

Or take a basin of the right size, fill it with some water, and put the cage stuck in the basin to make a "water palace" (be careful not to put too much water, and the cage must be stuck strongly, otherwise the hamster is easy to turn over if it is okay to climb the cage...). Don't ask me why I hold the stool, you know, God bless my fool from drowning, not dying of a cold, not being scared to death by a hair dryer...