What causes the program to show an error after closing the master s advance

Generally, there are three reasons for this phenomenon, one is the hardware, that is, there is a problem with the memory, and the other is the system!

Let's talk about the hardware first

Generally speaking, the possibility of memory problems is not large, the main aspects are: the memory module is broken, the memory quality is problematic, and there are two different brands of memory with different capacities, which is also more likely to be incompatible, and it is also necessary to pay attention to heat dissipation problems, especially after overclocking. You can use memtest to check the memory, which can thoroughly detect the stability of the memory.

If you have dual memory, and you have mixed memory modules of different brands or bought second-hand memory, this problem occurs, then you need to check whether there is a problem with the memory or is not compatible with other hardware.

If not, then troubleshoot from the software side.

Let's talk about the principle briefly: there is a place in memory called a buffer where data is stored, and when the program puts data in one of its locations, because there is not enough space, overflow will occur. Here's an example:

A bucket can only hold one pound of water, and when you put two pounds of water in, it will overflow. And the system is represented on the screen. This problem often appears on Windows 2000 and XP systems, Windows 2000 XP has very strict hardware requirements, once encountering resource deadlocks, overflows or illegal operations similar to Windows 98, the system to maintain stability, the above situation will occur.

There was an error somewhere in the program.

I've encountered this situation many times.,It's basically like running someone else's written **.。

At this time, my hunger type is treated like this:

Take a closer look at **, look at it from beginning to end, first find out the logical structure of the main program, and see if there is any output rotten cherry guess.

When I add my own ** to a program segment, I usually add a print statement to a certain line and print out a string to check whether the program will execute to that line. If there is a result, it means that the ** before that line is feasible, if not, you can put the position forward.

Generally, after the second step, you should be able to know which line of your ** has a problem, and it would be better if there was an error message, so that there is also a direction to solve it.

Finally, this method is only suitable for small programs, if it involves a larger capacity and a more complex structure, this method is not applicable, it is recommended to ask a professional person to help take a look. If it's someone else's, you can ask him for help, or look carefully at the notes in the code of the scum, if any.

Thank you!

I had this with my computer yesterday.

System: Windows 7 64bit Ultimate.

Problem symptoms: Most of the programs and software appear after about 3 seconds of opening the xx program stops working, and a problem occurs. IE10 can't run directly, double-click the IE icon, and only a busy mouse circle flashes.

Workaround: Uninstall system update patches that were installed within the last two days. For details, go to Control Panel Programs Programs and Functions Installed Updates Select Update File Right-click Uninstall.

Cause analysis: This problem is caused by patching with 360 security guard, and it is good to uninstall the patches of the last two days. I've been looking for a long time on the Internet.,I've tried the method on the Internet.,Antivirus.、Repair、Registry、Driver...

Eggplant dates. None of them worked. Of course, if it is poisoned, this symptom will also appear, but in the case of general poisoning, it is intuitive that the CPU usage rate has been maintained at 100%.

If your CPU usage is normal, you can rule out the possibility of poisoning.

Suggestion: Don't use 360 or other third-party software to patch the system in the future, you can't afford to hurt it. Who knows Microsoft better than Microsoft? Use optimization software with caution in the future.

Having said all this, I hope that the students who have this problem can solve the problem quickly and not take a detour.

Sincerely, Regards!

How have you been doing it lately? Try uninstalling all the software, patches, and drivers before the accident, and take a look at the following methods. If the fault is still there, it is recommended to check and kill the Trojan first, and try to repair the system (you think about the recent operation, the failure will not happen for no reason, **Application error, that dot is the program name, if you have a problem, please ask me to communicate).

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).

2. If the fault persists, use the system disk to repair it, open the positive file leakage prompt and enter sfc scannow enter (there is an empty stupid grid between sfc and ), insert the original system disk to repair the system, and the system will automatically compare and repair.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

Use the system's built-in method of system restore:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

If the memory module is unstable, unplug it to clean up and reinsert it.

Hello no before! Lenovo A360 mobile phone often warns that a program closes unexpectedly, has stopped, etc.: this is the way that the Android system is designed to avoid the crash of the whole system when the program reflects slowly or the program is abnormal, and when the abnormal situation occurs, click "Force shutdown or wait" according to the prompt After the system can run normally.

Try to operate: 1. If you open a certain software, it may be that this version is incompatible with A360 and other problems, so you can find the corresponding application software in the application management, and then "clear the comma file", or uninstall this software to use the built-in version of the system;

3. Or restore factory settings in Shanchachao, system settings - backup and reset - factory reset (data will be deleted, important data needs to be backed up);

4. Or upgrade to the latest software version to the Lenovo site to see if it can be improved, the latest software version is A360 S115 120712, system settings - about the phone - software version can be viewed.

Lenovo Le Store.

Site queries.