How to unclog the toilet yourself, how to unclog the toilet yourself

The easiest way to do this is to use the toilet bowl to create air pressure, adjust its position and flush it out of the small drain, and here's how to do it:

Tools Required: Toilet Bowl.

The first step is to align the toilet drain with a wrench, as shown in the figure below

The second step is to block the sewer mouth of the toilet bowl with force, as shown in the figure below

The third step is to start pumping the toilet bowl without stopping, as shown in the figure below

Fourth, after the dredging is completed, press the flush button and pull out the toilet bowl, as shown in the figure below

1. Picks. A toilet plug or toilet plug is the most common tool that people think of, and it is also the work that many people will prepare at home. This tool is indeed your first choice, as it can be done 90% of the time.

All you have to do is suck it into the place of the drain hole and repeat the push and push motion. When you try it for the first time, you should be gentle, and then a little more forceful.

2. Dish soap.

If you can't unclog the toilet with a wrench, you can go to the kitchen and get some dish soap and squeeze some of it out into the toilet. Wait about 5 to 10 minutes so they have time to move from the sewer to the blockage. Then, add non-boiling hot water to a bowl and pour it in.

In most cases, soap acts as a lubricant, lubricating the toilet drain and making it easier to unclog.

3. Baking soda and vinegar.

If your toilet is not only clogged but also full of water, you can use another option. Start by emptying the water inside, but keep some of it. Subsequently, pour a cup of baking soda and a cup of vinegar into the toilet drain.

When vinegar and baking soda are combined, the natural chemical reaction bubbles up and loosens the blockage. After about half an hour, pour some more hot water into it and see if it drains. If the blockage still doesn't work, you can try again.

4. Plastic water bottles.

If you don't have a crush in your home, you can also try using a plastic water bottle to unclog it. But considering that plastic water bottles are generally not that long, you should wear a rubber glove first. First, remove as much water as you can from the flush toilet.

Fill a large plastic bottle with warm water. Place your thumb on top and place the top of the bottle into the outlet at the bottom of the toilet. Remove your thumb and hold the bottle tightly with both hands.

Squeeze the bottle and let the water shoot into the toilet drain. The pressure created in this way may clear the blockage. When you do, it's a good idea to wear a mask and goggles to prevent splashing water.

Then pour hot water into the toilet, and if the water level drops, the blockage has been cleared. You can repeat these operations if necessary.

5. Plastic wrap.

In some cases, plastic wrap can also help you, but first make sure that your plastic wrap is of good quality. You will need enough plastic wrap to cover the toilet. The better the quality, the better the dredging effect.

First, wrap the toilet bowl in plastic wrap to form a seal. The plastic wrapper is then pushed to allow the air trapped underneath to push the water into it. You can repeat these movements as needed until the toilet is unclogged.

1.Rinse with a large vat.

The toilet is clogged, there is too little water, of course it can't be flushed, you can use a large bucket, fill it with water and flush it directly into the toilet. Flush the poop down with the pressure of water. Rinse several times until the water flows smoothly.

2.Use a toilet plug.

If the water can't be flushed, then use the toilet plug, use the toilet plug in the toilet bowl and press it several times, remember, be sure to adsorb it before pressing, let the pressure of the vacuum suck up the clogged things, and then press it down, and finally flush it with water until the water can flow smoothly, which proves that the toilet is unobstructed.

3.Make use of a toilet unclogger.

For deeper places that are blocked, this method is very effective. Go to the hardware store to buy a toilet dredge or a bicycle tie, because this tie is hard and easy to bend, and then bring rubber gloves to insert the toilet dredge into the toilet, be patient, take your time, stir back and forth after insertion, back and forth dredge, slowly you will feel that the agitation is easier than at the beginning, then it proves that the dredging is effective, and it feels almost flushed with water and flushed until the water runs smoothly.

4.Find a property.

It's also a good idea to find a property or an experienced neighbor to help clean it up. If you don't have the strength, you can also find someone to help, after all, the person in the property has experience, knows where the problem is, and has the tools to help clean up.

5.Find a professional toilet unclogger.

Find a professional toilet unclogger to help, but it will cost a little money! They will bring professional dredging tools, put the pipe into the toilet, start the engine and stir, and let it go for one or two minutes to ensure that it can be unobstructed.

Dun cloth method: use your mopping cloth to mop the floor. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth.

Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

Find a longer stretch of plastic water pipe, connect one end to the tap water, plug the other end into the toilet mouth, then plug the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to unclog the pipe.

Go to a 2 yuan store or a grocery store to buy a manual dredge (something that looks like a spring), and dredge it yourself, a dredge is a few yuan.

endSpecific causes and solutions.

Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools.

Toilet blockage: Accidentally fall into plastic brushes, bottle caps, soaps, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

Toilet aging and blockage: The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

Squatting pit to toilet: some old houses are installed when building a squatting pit, the bottom of the sewer pipe is used U-shaped waterproof elbow, when recreating the toilet, it is best to replace the bottom elbow with a direct bend, if you can't change it, then you must do a good job of cleaning the bottom bend before installing the toilet, and the installation is to avoid letting cement or tile fragments fall in.

Hair causes sewer blockage: After a period of use of the sewer, the hair that usually takes a bath will hang on the pipe wall and accumulate too much will cause blockage, and hair will generally cause blockage in the bathroom floor drain, washbasin blockage, bathtub blockage, and shower room blockage. Therefore, when you usually use it, you must cover the floor drain cover and other protective facilities, and if you have hair, you can pick it up and throw it into the trash.

What should I do if my hair is too much and my drain is clogged? This kind of blockage is easy to solve, you can dredge the water with a hand-cranked dredge, and if it is serious, you have to use a pipe dredging machine.

1. Check whether the toilet is aging.

After using the toilet, if there is no water or the water pressure is not enough when flushing, the dirt in the toilet bowl will not be flushed away.

Slowly, the dirt inside the toilet will block the place where the toilet turns and cause the toilet to clog. If it is determined that the reason for the aging of the toilet is causing the blockage, then there is no need to repair it, and it is better to replace it with a new one!

Second, the toilet suction is dredged.

The toilet is blocked, go to the store to buy a toilet suction, put the rubber on the end of the toilet mouth, and then press it down hard, and then lift it up and press it again, so try back and forth a few more times, and the toilet will be dredged under normal circumstances.

3. Dredging with wire hangers.

Find a wire hanger, bend the hanger, and put it inside the toilet pipe, and then use the hanger to unclog the clogged pipe in the toilet bowl in a variety of ways such as pushing, pulling, twisting, etc.

Fourth, the use of vinegar and baking soda for dredging and broadcasting.

You can pour baking soda and vinegar into the toilet, when pouring the vinegar will make a hissing sound, when the foam bubbles in the toilet, stop adding vinegar, pour in 4 liters of hot water to help dissolve the baking soda and vinegar, this is also an effective way to unclog the toilet.

Fifth, the use of caustic soda for dredging.

Go to the store to buy some caustic soda (sodium hydroxide), melt the caustic soda with boiling water, pour it into the toilet, and wait for ten minutes for the toilet to be unblocked. However, caustic soda is strongly alkaline and extremely corrosive, so care must be taken when using it.

Sixth, the use of pipeline dredging agent for dredging.

Buy a pipe unclog in the store and pour one-third of the unclogging agent every 3 minutes. After pouring it all, wait for the dredging agent to stay for 5 minutes, pour in hot water, and leave it for about 10 minutes to wash with clean water, which can also effectively dredge the toilet.

7. Find a professional dredge.

If the above methods are useless, then you need to ask a professional dredge personnel to dredge, although there will be a certain cost, but this is the most time-saving and labor-saving, the effect is also the fastest, can quickly solve the problem of toilet blockage.

1. Prepare a large bucket, fill the bucket with water, pour it all into the toilet bowl at one time, and use the momentum of the water to flush the toothbrush down; 2. Fill the toilet with water, then use the toilet to suction the flush port, pump a few times, and wash the toothbrush out; 3. Find a professional sewer maintenance personnel, use professional tools to dredge the sewer, and easily solve the blockage problem.

1. The indoor toilet is blocked, the mop that can be used must be the kind with the dun cloth, use the dun cloth to block the drain of the toilet, and then add water to the toilet until the dun cloth is submerged, and then press down the dun cloth with force, so that it can enter the toilet sewer, and then quickly lift the dun cloth, do it a few more times, and you can suck things out.

2. Buy a relatively long plastic water pipe, connect one end of the water pipe to the faucet, and the other end is plugged into the drain of the toilet, and use rags to block the drain, then open the faucet, let the water flow into the drain, and use the water pressure to achieve the purpose of dredging the drain.

3. The use of manual dredge can also solve the problem of toilet blockage, and the manual dredge is not expensive, you can buy it for a few yuan. If none of the above methods can solve the problem, then it is best to ask a professional construction master to dredge the toilet as soon as possible, so as not to affect the normal use in the later stage.

The dredging method is as follows:

1.You can find a half-inch wide bamboo strip and put it into the toilet to dredge it, which can solve the problem.

2.You can make the toilet flush more often, and it will be cleared by itself, especially if it is a soluble or breakable item such as dirt or paper. If it is greasy, then rinse a basin of boiling water to melt it. Half a lemon may not go down well.

3.Buy some caustic soda, boil water to melt the caustic soda, and pour it into the toilet. After ten minutes, everything will be cleared.

4.Find a property they have the responsibility and obligation to help you.

5.Use an appropriate amount of oxalic acid (you can usually use oxalic acid to clean the toilet, just neutralize with the urine alkali to make the toilet unblocked). The effect on lemons should also be ideal.

6.The kind of old-fashioned mop fills the toilet bowl with half of the spike wide water, and then uses the mop to press the hole a few times, moving quickly, relying on pressure to get it through.

7.You pour half of the water into it, use a round mop, or a round-tipped soft brush, and aim it at the hole in the sewer and poke it hard.

8.Go to the grocery store and buy a simple toilet. The plastic one is only 2 yuan. Fill the toilet with water, then use the toilet bowl to target the mouth of the toilet bowl and pump it a few times. It is made by using its air pressure.

9.The ultimate solution is to find a professional who unclogs the pipes to unclog the toilet imitation lead.