How to fix a faucet on a tile 20

Hello landlord! It is said that the pipe of the installation faucet is about 2 cm away from the wall, (the pipe of the installation faucet is from the surface of the tile, you can see a section, this is the exposed pipe, you can't see the water pipe, you can only see the faucet, this is the hidden pipe) In this way, you can fix the water pipe with a special card for the water pipe, if the faucet is installed on the outlet of the water pipe, and the water pipe is buried in the wall, the water pipe mouth and the faucet will move, as long as the pipe mouth is plugged around it. The following ** can be referred to.

Literally, it should be your installation error, the reserved gap is large, it is not advisable to fix it with white glass glue, and it will become an ugly color after a long time, so choose black glass glue, but it must be handled at one time, and it must be done very sleek, first fill the gap between the faucet and the wall (you can choose to use a small nut to screw it on the bolt between the faucet and the water pipe in the wall), and then seal the surface with black glass glue, and then use the faucet after the glue is dry!

Put a ring on the wall......It can also be used to fix faucets.

Good faucets have fitting covers, and what you buy must not be branded. It's glued with waterproof glue.

Every family can not leave the water equipment, the faucet, as one of the water equipment, has also become an indispensable supplies for every household, but many people in the process of installing the faucet, do not know how to fix the faucet, below I will tell you how to fix the faucet and what to pay attention to in the installation of the faucet, if you want to know it, continue to look at it!

1. How to fix the faucet.

The fixed faucet should first penetrate the water inlet hose and white rubber pad from the lower end of the faucet, and then put the lock nut under the two water inlet hoses, rotate the sleeve of the lock nut, fix the faucet on the single-hole basin, and then connect the drain and the water inlet.

Second, what should be paid attention to in the installation of faucets.

1. When installing the faucet, the strength should be moderate, not too strong, so as not to cause damage to the faucet, in addition, after the installation, the surface of the faucet needs to be cleaned so as not to affect the appearance and use effect. In the case that you don't know how to install the faucet, you should ask a professional master to come to the door to install it.

2. When installing a faucet in a new house, the water is bound to contain a lot of impurities, so before installing the faucet, the debris in the pipe must be cleaned up, and the water must not be stopped until the water becomes clear, and then start to install the faucet, so as not to block the water pipe and cause the faucet to fail to come out.

3. In the process of installing the faucet, the faucet should not be in contact with hard objects, and the surface should not be left with cement, glue and other sundries, so as not to affect the gloss of the faucet surface.

Summary: The relevant content of how to fix the faucet is introduced here for everyone, hoping to help friends in need. When installing the faucet, you can follow the above steps step by step, but it is recommended that you ask a professional master to come to the door for installation, so as to avoid the problem of not being able to receive water due to the wrong steps.

Use a shower nut, one side is flat and one side is threaded, first measure the hole distance of the faucet and fix the plane with screws on the wall board OK, go back to find you a drawing, I hope it will help you!

Buried pipes in the wall, pipe clamp fixing, expansion screws, and tile walls can also try AB glue.

Make a display board out of wooden boards and fix the faucet on the display board.

It's from the model room.

Generally, the counter is done and then displayed accordingly according to the difference in the faucet you prevent. Generally speaking, when you join a brand, he will give you the corresponding decoration drawings. We are CAE Sheen Sanitary Ware and welcome you.

I've seen the shop of the first Tao store. It's beautifully packed. The faucet is also very good. All stainless steel. Scoop stainless steel faucets first. I heard that at the zero threshold, you can buy directly and you can do their dealer call.

1. First of all, the kitchen faucet is used frequently, and it is easy to loosen when it is moved around, so the lock nut must be tightened during installation. Generally, there are two fixing methods, one is the horseshoe, and the other is the threaded column installation, which can be fixed.

2. If the faucet is not installed well, there will be shaking, the faucet is installed above and below the sink with a flat pad with rubber rings, if not, buy a new one, if there is, check whether it has been damaged, if it is damaged, it is good to replace it again.

3. At present, there are some faucets on the market that are fixed with a nut for the solenoid, which has a very good stabilizing effect, and if it can solve the problem of dewatering and lifting, it will be a popular trend in the future.

1. Generally, it is best to use a clip, find a small piece of leftover material 3 or 5 thick steel plates (preferably stainless steel plates), and make one according to the card shape of the fixed support below. After the clip is snapped, glue around the basin.

2. If you really can't use the clip, put glue on the lower edge of the basin, and then glue around after putting it on.

3. Use glass glue to directly hit the edge of the groove and the place where the table top is accepted to prevent water from seeping in.

4. There are some faucets on the market that are fixed with nuts for the solenoid, which has a good stabilizing effect, and if it can solve the problem of water lifting, it is a good choice for fixing the faucet. Before the faucet is installed, it is necessary to confirm that there is no cement and sand in the reserved water level, clean it and then install it.

5. The screw fixing is simpler, find a screw of the same size and a little longer than the other, install it, and use a hacksaw bow to see a slot at the wire head.