What should I do if the lid of the rice cooker won t open?

1. Rotate the lid clockwise, if the lid moves, it means that there is no air pressure in the pot, and the main reason why the pot cannot be opened is that there is no return to stop the opening and prevent the lid from being opened. The solution is to use a hard object such as chopsticks and put the lid on"Open the lid and lock the valve"Press down firmly and press the check valve.

Push the check valve back into place to open the lid.

2. If you rotate the lid clockwise and do not move, it may be that there is still air pressure in the pot, and the rice cooker cannot be opened is a protective behavior, and it must be cooled and relieved if you want to open it. If you are not in a hurry, you can wait for the rice cooker to cool naturally and release the pressure, and generally do not need to lift the pressure to vent the pressure. If this method is not used, attention should be paid to the gas emitted from the vent at the top of the pressure felling.

1. Use chopsticks to press down the "opening and locking valve" on the lid and press it into place, and then rotate it in the direction of opening to the position of opening the lid to open it.

2. Rinse with cold water until it can be opened.

3. Find the (on-off) position on the lid with one hand, grab the other side with one hand, and slowly exert force along the direction of opening.

1.There is still air pressure inside the rice cooker: If you rotate the lid clockwise and do not move, it may be that the pot still has air pressure and must be cooled and relieved.

The methods of pressure relief are generally natural cooling, wind blowing cooling and lifting pressure felling. If you are not in a hurry to boil the pot, it is best to use natural cooling to relieve pressure, and there is generally no need to lift the pressure to relieve pressure until it is absolutely necessary.

2.Check valve problem: Rotate the lid clockwise, if the lid moves, it means that the pot has no air pressure, and the main reason why the pot can't be opened is that the stop opening is not returned, preventing the lid from being opened.

The solution is to find a hard object (such as chopsticks and the like) and press the check valve to bring the check valve back into place to open the lid.

The lid of the rice cooker can't be opened, first of all, you have to see if the water vapor inside has not been emptied, and then it can't be opened, you can cool it down and then open it.

The lid of the rice cooker can't be opened, which means that the gas inside has not been cleaned, so. I can't open it. The caress exhaust valve puts the steam in and opens.

Press hard to see if it's broken, and if it's broken, take it to a repair shop to fix it.

The lid can't be opened, you can use a vise.

How to open the lid:

1. Use chopsticks to press down the "opening and locking valve" on the lid and press it into place, and then rotate it in the direction of opening to the position of opening the lid to open it.

2. Rinse with cold water until it can be opened.

3. Find the (on-off) position on the lid with one hand, grab the other side with one hand, and slowly exert force along the direction of opening.

Reasons why the lid of the rice cooker won't open:

1. If you don't have a complete pressure relief, just wait patiently for a complete pressure relief.

2. The electric pressure cooker has been used for a long time, although the pressure has dropped to normal atmospheric pressure, but the safety valve cannot naturally fall to the position where the lid can be opened normally due to the increase in resistance between the safety valve and the lid (oil, food residues and oxides).

Check Valve ProblemThe check valve problem of the Supor electric pressure cooker will cause the lid to not be opened. You can rotate the lid of the Supor electric pressure cooker clockwise, if the lid is moving, it means that there is no air pressure in the pot, that is, the check valve has no aftertaste, the solution is to find a hard object (such as chopsticks and the like), press the check valve, and promote the check valve to return, and you can open the lid.

2.There is more gas in the pot, and the electric pressure cooker uses the principle of gas to make the food more comprehensively heated and has high nutritional value. If there is a lot of gas in the Supor electric pressure cooker, it is easy to fail to open the lid.

At this time, natural cooling and wind cooling can be solved, and it is generally not necessary to lift the pressure to vent the pressure until it is absolutely necessary.

3.The pressure lock is lockedThe current Supor electric pressure cooker has the safety protection of opening and closing the lid, which can ensure that the lid and the pot body cannot be pressurized when the lid and the pot body are not in place.

I still can't open the question.

Refer to the fault or problem column can go to the manual, if you can't find a solution, it is best to call after-sales or service ** consultation.

1.For rice cookers with high-pressure functions, attention should be paid to the position of the pressure reducing valve before turning on the power to make porridge, otherwise the air outlet will be too long when the rice is boiling, causing the rice slurry to block the exhaust hole or pressure reducing valve, so that it is not safe and will affect the opening time.

2.In addition, before boiling the pot, disconnect the power supply, and wet two towels with cold water and apply them to both sides of the lid to cool down, paying special attention not to cover the exhaust holes. If there is a blockage, clean the rice pulp particles on the lid of the pot after boiling, especially the vent hole and pot ring must be cleaned.

Hello, dear, I'm glad to answer for you what to do if the lid of the rice cooker can't be opened?If the lid of the rice cooker does not open, you can try the following methods:1

Wait for it to cool and try again: If the rice cooker has just finished cooking and the lid won't open, it may be because of too much pressure inside, you can wait for the rice cooker to cool down and try again. 2.

Press the decompression button: Some rice cookers have a decompression button on the lid, and you can press the button to release the internal pressure before trying to open the lid. 3.

Tap firmly: You can gently tap the lid of the rice cooker with your hands, sometimes this will open the lid. Be careful not to use too much force to avoid damaging the rice cooker.

4.Tool Aid: If none of the above methods work, you can use some tool aids, such as rubber pads, rubber gloves, fine nose forceps, etc., to hold the lid and twist it firmly to open the lid.

Be careful not to use too much force to avoid damaging the rice cooker or injuring yourself. If none of the above methods can solve the problem, it is recommended that you contact the manufacturer of the rice cooker or the after-sales service center for more professional help and advice. I hope this service can help you, thank you for your consultation, and I wish you all the best!

Step 1, rotate the lid clockwise, if the lid is moving, it means that there is no air pressure in the pot, and the main reason why you can't open the pot is that there is no return to the position, preventing you from opening the lid. The solution is that you can find a hard object, such as chopsticks, and press the check valve to make the check valve return to position to open the lid; What should I do if the pressure cooker can't open the lid Step 2, if you rotate the lid clockwise and don't move, it may be that there is still air pressure in the pot, and you must cool it and relieve the pressure. The methods of pressure relief are generally natural cooling, wind blowing cooling and lifting pressure felling.

If you are not in a hurry to boil the pot, it is best to use the natural cooling method to relieve pressure; Step 3, the main reason for not opening the lid is that the lid is not cleaned in time, there are too many foreign bodies attached to the lid, the residue in the lid should be cleaned in time and often to ensure that the lid is clean; Step 4: If you have made sure that the pot has been fully cooled and there is no air pressure, you can try to find the (on-off) position on the lid with one hand, grab the other side with one hand, and slowly press hard in the direction of opening, and then push harder, it will open without damaging the pressure cooker.

Summary. The reason why the pressure of the electric pressure cooker is not enough and the release valve cannot be pushed up:

1. First of all, it is necessary to see whether there is serious air leakage; For example, whether the rubber seal, float valve, exhaust nozzle root, safety valve, or the upper edge of the inner tank are collided and deformed by external forces.

2. Detect whether the pressure switch is improperly adjusted; If there is no air leakage and the pressure is not enough, readjust the pressure switch.

The electric pressure cooker pressure switch is adjusted as follows:

1. Adjust the adjusting screw of the pressure switch clockwise with a small change cone with the width of the knife edge, until the pressure switch is electrocuted and disconnected (there is a "click" sound) and then slowly adjust the adjusting screw of the pressure switch counterclockwise, and the adjusting screw of the pressure switch is 3 4 turns that continue to adjust the pressure switch in the counterclockwise direction when the contact of the pressure switch is completely closed (there is a "click" sound).

2. Put water not lower than the minimum water level control line into the pot.

3. Close and tighten the lid of the pot, place the pressure limiting deflation valve, and check whether the float has fallen.

4. Energized heating, when the float rises shortly, the water vapor comes out from the pressure limiting waiver valve and emits a "sizzling" sound when disconnecting the power supply, carefully adjust the adjusting screw of the pressure switch from the bottom of the pot to the clockwise direction, and stop the adjustment immediately when the pressure switch is disconnected when the "click" sound is heard, and then energized only to see a slight water vapor coming out of the pressure limiting release valve, which will turn to the pressure holding state for a while, so far the adjustment is completed.

What should I do if the lid of the rice cooker won't open?

Hello Fu Mu La, how to solve the problem that the rice cooker can't open the lid. First of all, it may be that there is air pressure in the pot, and the lid can be opened after the pressure is discharged; Secondly, if there is no air pressure in the pot, it may be because the check valve has not returned to the slippery position, you can use chopsticks to press down the check valve and let it return to the position to open the lid; Hold the lid switch position with the last hand, hold the other side with one hand, and slowly force it in the direction to open.

The return valve can't be pressed.

The reasons why the pressure of the electric pressure cooker is not enough to resist the release valve can not be raised: 1. First of all, it is necessary to see whether there is serious air leakage; For example, whether the rubber seal, float valve, exhaust nozzle root, safety valve, or the upper edge of the inner tank are collided and deformed by external forces. 2. Detect whether the pressure is improperly adjusted; If there is no air leakage and the pressure is not enough, readjust the pressure switch.

The pressure switch of the electric pressure cooker is adjusted as follows: 1. Adjust the adjusting screw of the pressure switch clockwise with a small change cone with the width of the knife edge, until the pressure switch is electrocuted and disconnected (there is a "click" sound), and then slowly adjust the adjusting screw of the pressure switch counterclockwise, and the adjusting screw of the pressure switch is continued to adjust the pressure switch in the counterclockwise direction 3 4 times when the pressure switch contact is completely closed (there is a "click" sound). 2. Put water not lower than the minimum water level control line into the pot.

3. Close and tighten the lid of the pot, place the pressure limiting deflation valve, and check whether the float has fallen. 4. Energized heating, when the float rises shortly, the water vapor comes out from the pressure limiting waiver valve and emits a "sizzling" sound when disconnecting the power supply, carefully adjust the adjusting screw of the pressure switch from the bottom of the pot to the clockwise direction, and stop the adjustment immediately when the pressure switch is disconnected when the "click" sound is heard, and then energized only to see a slight water vapor coming out of the pressure limiting release valve, which will turn to the pressure holding state for a while, so far the adjustment is completed.