What should you pay attention to when choosing tiles?

There are several main aspects.

The same specification is heavier and the density is higher.

Use a black marker pen to make a mark on the surface, and wipe it after a while, which can be easily wiped off It shows that the surface is dense, even if it is a polished brick, the small holes on the surface have been glazed, so that the brick will not be discolored and dirty.

Looking at the back, that is, the embryonic bottom, the color redness is generally not good, but now many crystalline throwing bricks add color to the embryonic bottom, so this method is only suitable for selecting ordinary wall and floor tiles of small specifications such as 30*45.

Dripping water from the back, that is, upstairs This is to see the water absorption rate, the general molecules with high water absorption are loosely arranged, and they are not suitable for use in kitchens and bathrooms and other humid spaces.

From the side, looking at the thickness of the enamel layer, in general, of course, thick is good.

Cost-effective products are the ultimate goal of purchasing, so second- and third-tier brands are more suitable choices, such as Marco Polo, Xinzhongyuan, etc., **The above concessions are also a lot, and you can go to Taobao according to your actual situation, and tell you a secret, but what about ·· Hee-hee··· Yours invite me to dinner haha This secret can help you save a sum of money

1.Whether the surface is smooth and detailed, and whether the brightness is good. 2. Turn over the back and drop a small amount of water to the top to see the degree of water penetration, the water penetration is slow, and the quality of the tile is better if the area is small.

1. Look at the appearance. The color of the tile should be uniform, the surface finish and flatness should be good, the weekly rental sail stove edge is regular, the pattern is complete, and four or five pieces are extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners.

2. Listen to the sound. Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand.

3. Drip test. You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

4. Measurement. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

The main thing to choose ceramic tiles is to pay attention to its quality, reputation, color and quality. Like Jinzun Ceramic Tile is a high-quality, colorful, suitable production, sales as one of the large-scale modern production enterprises. I bought the tiles at his house

Arrange the body force reasonably, try to avoid excessive force on the waist, pay attention to the gentle release, and avoid overwhelming the hands.

<> "What should I pay attention to when choosing tiles?

1. Glazed tiles.

Generally speaking, glazed tiles are coated with a layer of glaze on the surface of the floor tiles, so as to make the surface of the floor tiles smoother, more gorgeous, and easy to clean.

In addition, it also has the characteristics of low water absorption and strong anti-fouling cleaning effect, so it is widely used in home life and production.

Second, the whole body brick.

Contrary to glazed tiles, the surface of the whole body brick does not have a layer of glaze, and the surface of the floor tile is not so smooth, and the anti-slip and wear-resistant properties are relatively strong, which is very suitable for use in some non-slip places, such as some public places and places with the elderly and children, which are very good choices for floor tiles.

Third, the lack of family books and polished tiles.

As the name suggests, the surface of the polished tile has been polished, which has the characteristics of wear resistance and strong hardness, and is also very widely used in home production and life, but in order to ensure the quality of the polished brick, it is generally necessary to choose a big brand of polished brick.

Fourth, vitrified bricks.

Among all the types of bricks, vitrified bricks are the hardest type of bricks, which have the characteristics of strong hardness, waterproof and moisture-proof, easy to clean, etc., while the decoration effect is good, and it is deeply loved by many consumers.

5. Marble bricks.

Marble bricks are relatively cheap, wear resistance is also very good, generally speaking, it is widely used on stairs, but the color is a little monotonous, not easy to match, not suitable for some families with high requirements for home decoration.

Sixth, matte bricks.

Matte brick is a type of brick with low brightness, which has the characteristics of wear resistance and high hardness, and is also a type of brick loved by many consumers.

7. Printed bricks.

There are a variety of patterns on the surface of the floor tiles, which can meet the needs of different people, and a variety of patterns can increase the layering of the whole home life, which is also a very good choice.

Note: 1. Different spaces have different requirements for bricks, and it is necessary to pay attention to the selection of bricks in special areas. For example, the floor tiles of the kitchen and the floor tiles of the bathroom should be glazed tiles, which can effectively prevent water, oil, slip and paint.

2. After calculating the number of tiles needed, try to buy a few more within the range, because it is likely that the first batch of floor tiles and the next batch of floor tiles will be different in appearance, resulting in different appearances.

3. When receiving the goods, be sure to check the edges and corners of the bricks, whether there are bumps and bumps, so that the merchant can compensate.

Answer: I bought Chuangrui tiles, I looked at these aspects when choosing: the first size: the size of the product is the same, which can save construction time and is neat and beautiful.

Water absorption: the lower the water absorption, the better the degree of vitrification, the better the physical and chemical properties of the product, and the less likely it is to crack or peel due to thermal expansion and contraction due to climate change.

Flatness: The tile with good flatness has no bending, no warping angle, easy construction, and the ground is flat after construction. Strength: high flexural strength, good wear resistance and heavy pressure resistance, not easy to wear, long-lasting, suitable for use in public places.

Color difference: lay the tiles flat on the floor, put them together into a square meter, and whether there is a different shade of color or cannot be connected from three meters, resulting in aesthetic obstacles.