How much does it take for the toilet to sink before the squatting toilet can be installed, and the s

The main purpose of installing a squatting toilet is to make it easy to clean, and if it is 20 cm high, it is better to install a toilet. Theoretically, a 40 cm sink would allow you to install a squatting toilet, but there is another constraint that is the way your drains are arranged. There are basically two forms of squatting toilets, one is not with a return bend, which is relatively thin, but the drain pipe needs to be added with a return bend, and the other is with a return bend, which is mostly used now, the height is basically 30 cm, and there is a kind of thin 23 cm or so.

If your drain is reserved (straight from the floor), you can just buy a 30 cm high one and install it without going beyond the ground. If you don't have a reserved drain pipe, you need to connect the drain pipe yourself, you connect the drain pipe to the floor plan, and then buy a 23 cm one, which will not exceed the ground, 23 cm plus 11 cm of water pipe, plus 2 cm of elbow, 35 cm can be, and the slope of the bathroom drainage will not be affected. I have smashed the floor slab through the squatting toilet before, and it can be used normally, if the squatting toilet is not installed at 40 cm, it can be said that the workers do not understand water and electricity at all.

It is recommended to buy a squatting toilet with a trap, about 20 22cm, 110pvc with elbow about 15cm, and put the water outlet of the squatting toilet into the pvc pipe elbow 2 3cmThe total installation height is about 35cm, and the ground elevation of the bathroom building is about 5cm higher than the ground elevation of the indoor building

If it's not high, if it's in the way, you won't be able to shoot it.

1. If you live upstairs or downstairs, if you live on the first floor, you can dig down, you can dig 30cm; After the floor is covered with concrete and waterproofing.

2. If you live upstairs, you must raise the ground 200 high, and 180 is the lowest line.

3. Generally, the squatting toilet is 18-26cm high, you must first choose a good squatting toilet, compared to do, when choosing a squatting toilet, you should also pay attention to the direction and length of the squatting toilet outlet, whether it can be connected with your bathroom sewer, pay attention to the front mouth or the back mouth, in short, you must measure well to choose the right one, so that you can raise the ground according to the height of the toilet.

Summary. Hello, dear, the bathroom sinks 30 cm. Before installing the squatting toilet, it is first necessary to determine its sewage outlet, and at the same time, the sewer pipe should be installed from the suitable position of the wall, and the position and distance between the sewer pipe mouth and the ground should be determined.

Determine the location, to do a good job of a pit, because the bathroom is 30 cm, when setting the height is generally higher than the squatting toilet, the installation is more time-saving.

How much does it take for the bathroom to sink before the squatting toilet can be installed, and ask for the specific algorithm.

Hello, dear, the bathroom sinks 30 cm. Before installing the squatting toilet, it is first necessary to determine its sewage outlet, and at the same time, it is necessary to install the sewer pipe from the suitable position of the wall, and determine the location and distance between the sewer pipe mouth and the ground. Determine the location, to do a good job of a pit, because the bathroom has become 30 cm, when setting the height, the wisdom is generally higher than the squatting toilet, and the installation is more time-saving.

If you choose a squatting toilet with a Zheng yard trap, the height of the installation should be in the range of 25 28 cm, with a depth of volume, and it is not easy to clog the problem.

The house you live in is on the first floor, you can dig down, you can dig 30cm down and use concrete to add waterproofing to the floor.

If it's upstairs, you can't get through the floor slab, so the upstairs must raise the ground 200 high, 180 is the lowest line, and some construction is poor.

Specifically, depending on how high the squatting toilet you bought, generally 18-26cm high, you must first choose a good squatting toilet, compared to do, when choosing a squatting toilet, you should also pay attention to the direction and length of the squatting toilet drain, whether it can be connected to your bathroom drain, pay attention to whether it is the front mouth or the back mouth, in short, you must measure well to choose the right one, so that you can raise the ground according to the height of the toilet.

Yes, squatting on the spot and raising the ground. Generally, the elevation is about 18 cm.

It's just that the bottom of the squatting urinal should be built with bricks, that is, the height of the squatting urinal.

Yes, how much you raise depends on how high you buy a squatting toilet.

Normally, when decorating, the slope can be increased during construction!

Although the toilet is very common now, in fact, many people still like to squat toilets, which can not only be convenient to use, but also can reduce the floor area, so that the bathroom looks more spacious, but the installation method of squatting toilets is more special, and now most developers will not reserve squatting pits. So, how to install a squatting toilet with a non-sinking type? What do I need to pay attention to when installing a squatting toilet?

Let's take a brief look at it together.

1. How to install a squatting toilet with a non-sinking type.

You can make a platform about 20cm high, and then install a squatting toilet on the platform, so that it is not easy to destroy the waterproof layer, because the water consumption of the bathroom is very large, so it is best not to dig a pit at will, if you accidentally damage the waterproof layer, there will be leakage, it is very troublesome to repair, and the downstairs neighbors will not agree, therefore, the installation of the floor is a relatively safe method.

2. What should be paid attention to when installing a squatting toilet.

1. When installing the squatting toilet, the size of the squatting toilet should be measured first, and then the installation position should be reserved.

2. According to Qeeka Home experts, brushing asphalt or butter on the surface of the squatting toilet can effectively avoid the squatting toilet swelling and cracking, but when heating the asphalt, it is necessary to pay attention to controlling the temperature to avoid the rupture of the squatting toilet due to overheating.

3. The trap has the effect of odor isolation, so if the squatting toilet is not empty, it needs to be added at the sewer pipe, but if the squatting toilet itself already has a trap, it does not need to be installed separately, otherwise it is easy to affect the function of flushing.

4. When the squatting toilet is installed, it should be constructed in strict accordance with the requirements to avoid the situation of heavy objects hitting violently, otherwise it is easy to damage the waterproof layer.

Summary: The above about how to install a non-sinking squatting toilet, and what you need to pay attention to when installing a squatting toilet, is introduced here, I hope it will help you. If you want to know more about related information, please pay attention to Qeeka Home.