How to quickly clean the water on the floor after showering in the bathroom? Any tips?

How to quickly clean the water on the floor after showering in the bathroom? Any tips?

1.Wipers: Buy ground wipers that are very similar to car windshield wipers. Also known as wipers, wipers. After bathing, use a spatula to scrape the water from the groundwater into the floor drain.

Wipers can quickly clean water from the floor or kitchen countertops. At the same time, you can also scrape off the water stains on the glass of the shower room to avoid leaving water stains; In winter, you can also clean the water mist on the surface of the mirror. This is a relatively simple and effective way to deal with it.

The downside is that you have to use this to clean the bathroom every time you take a shower. **From ten yuan to several tens of yuan.

2.Prepare some absorbent mops, with the continuous improvement of living standards, people have also carried out in-depth research and innovation on traditional tools. For example, when buying a mop, it is difficult to get traditional cotton and linen.

Material. Instead, it is a more modern and absorbent foam. So, is this new mop effective in dealing with stagnant water in the bathroom? If your bathroom uses floor tiles.

The mopping effect of this material is still obvious. But if you have a complex floor tile structure, then the effect of this mop will be greatly reduced. Moreover, the foam absorbent mop has nothing to do with the gaps between the bricks.

It dries out the brick surface but ignores the gaps and the parts that are connected to the wall. This method of mopping the floor is obviously not advisable. So what should be done?

The solution is actually quite simple. We just need to buy a large brush cotton. This kind of brush cotton not only has good water absorption, but also removes stains along the way, which will be found after long-term use.

No matter how long the bathroom is used, the floors will be as clean as new.

3.Laying floor tiles: On top of the original floor tiles, lay a new layer of floor tiles with tile adhesive.

Gluing, filling in the original unevenness. Existing floor tiles can also be removed and relaid. It is easier to lay directly on the original tile.

This is more troublesome, but it can better solve the problem of uneven ground. When relaying the floor tiles, make a water guide pipe on the floor tiles to direct the water to the floor drain. If the middle of the ground is uneven, just stick a layer of floor tiles in the middle and leave a water guide groove around it, provided that the drainage slope around the face of the original ground is good.

The first method: prepare an old towel or bath towel with strong water absorption in the bathroom, spread it on the ground after bathing, take it to dry after absorbing enough water, and then repeat it two or three times, and then open the window to ventilate, or open the exhaust fan, and it will dry quickly. The second method:

Now there is a mop set that can be rotated to dry the water, you can buy a set, drag the mop down the ground after taking a shower, and then put the matching mop bucket to dry, and so on, the water on the ground can be mopped clean by mopping two or three times normally, and it will all dry up if you ventilate.

First of all, you can spread an old towel or bath towel with strong water absorption on the ground, and then spread it directly on the ground after washing your feet, and you can choose to sweep the water with a broom, and then mop it with a mop; The trick is that there are a lot of them now, in fact, there is a kind of scraper mop that scrapes the water directly and the water flows away.

At this time, you can use a broom to sweep all the water into the floor drain, and then use a mop to clean it; At this time, you can stop using the shower room first, then sweep the water on the ground into the floor drain with a broom, mop it with a mop, and wipe it clean with a dry towel.

1. First use white vinegar to spray the dirty place, and then use a soft towel to wipe it, because white vinegar has the effect of corrosive dirt on ceramic tiles, and also plays a certain role in disinfection.

2. Use a vacuum cleaner to vacuum the bathroom floor, the toilet can provide people with the function of bathing, but it cannot avoid the loss of some hair, which leads to the blockage of the sewer, we need to use the vacuum cleaner in time to vacuum the ground of the bathroom to prevent the hair from falling into the sewer, so as to avoid the sewer blockage.

3. Use the candle cleaning method to clean, collect the remaining candle heads, chop them to remove the core, add the same weight of pine oil, put the mixed candles in the pot and boil them through water, so that the candles and pine oil can be fully melted, which can eliminate most of the dirt on the floor tiles.

4. According to different tile floors for different cleaning, the floor is divided into tile floors, marble floors, wooden floors, according to different kinds of floors their removal methods are also different, in general, the cleaning methods of tile floors and marble floors are similar, wooden floors can not be cleaned with corrosive detergents to prevent the floor from rotting.

The use of shower rooms in home decoration is becoming more and more common, and glass is used most frequently among many materials, but although glass is durable, it is also more troublesome in terms of cleaning, so what aspects do shower room cleaning need to do? Let's take a look!

How to clean the shower room?

How is the shower room designed?

How to install the glass of the shower room to be safe?

It can be washed with a mixture of vinegar and salt, and it will not take long to remove the stain. You can also paint the glass in the bathroom with glassware cleaning liquid, then wipe it with a toothbrush, and clean it with warm or slightly hot water.

I think if we have a shower in the bathroom, if we want to clean it better, we need to prepare some cleaning items, such as detergent and brushes, and then we can clean it once a week.

1. The surface of the tile is dirty, the brick surface layer of the glazed tile in the bathroom is a very dense substance, the colored liquid and dirty things will not penetrate into the brick, if there is dirt on the surface of the tile, you can use a rag to wipe the brick surface with water or some washing spirits.

2. For tiles with a strong sense of concave and convex, if there is a lot of dust hidden in the uneven gaps, you should use a brush brush, and then rinse with clean water to remove the dirt on the brick surface.

3. Rusty stains on tiles, in addition to washing, the bathroom may also be used for cleaning ordinary vegetables and fruits or water cups. At this time, the floor tiles or wall tiles of the bathroom will often have traces left by unclean stains.

4. Stains such as tea stains, fruit stains, coffee sauce vinegar and other stains can be diluted with sodium hypochlorite (bleach), soaked for 20-30 minutes and then wiped with a cloth; Some stains are longer and take several hours to soak.

5. The mildew spots formed by the mildew of ink and antifouling wax can be diluted with sodium hypochlorite (bleach). To use, simply apply bleach to the stain, soak it for a few minutes, and wipe it off.

6. There are also cement, scale, rust, rust spots, these stains, using hydrochloric acid or phosphoric acid solution to rub several times is also effective. Paints, oils, oil-based markers, and surface antifouling wax layers can be cleaned with alkaline detergents or organic solvents (acetone, triethylene), paint removers, and degreasing agents.

7. In other cases, in addition to dirt and water traces, if the tile surface is accidentally scratched and leaves traces, we can also wipe some toothpaste on the scratched place, and then wipe off the toothpaste with a dry cloth to eliminate the traces.

1. Laundry detergent, detergent, and the tiles for cleaning the toilet can be cleaned with laundry detergent, first use a clean towel dipped in dry laundry detergent, wipe them all on the stained walls and tiles on the ground, and then wipe them again with a scouring pad dipped in water, and finally wash the scouring pad and wipe it again. The tiles cleaned in this way are clean and have a fresh fragrance.

2. Special cleaner, for the toilet wall, the floor of the tile, some stubborn stains or to use a professional tile cleaner will not hurt the surface of the tile, as long as there is a stain in the place lightly sprayed, infiltrate a minute after a wipe with a rag to clean, not only save time and effort to wipe clean, but also protect the tile. In addition, after wiping the stain with a special detergent, be sure to brush the detergent remaining on the surface of the tile with clean water, otherwise the residue will corrode the tiles.

3. Toothpaste decontamination, toothpaste is the most ideal cleaner for tile decontamination, and toothpaste is only the cheapest white milky toothpaste. When there are stains on the tiles, squeeze a little toothpaste, twist the rag into a kind that is not wet or dry, and wipe the tiles twice to restore the white and new appearance. Toothpaste is also suitable for tiles in various places such as living rooms, kitchens, etc.