Tianyu Bumblebee: Why the screen is always inaccurate, especially on both sides

If there is a problem with the cable or the screen, it will be good to go and repair it. If the error is small, adjust it manually. If you have a problem with the Internet, it may be that the parameters of your mobile phone are not right, search on the Internet, set the parameters, if it still doesn't work, it means that there is a problem with your mobile phone card, or the mobile phone is broken.

There is a quick way to set parameters, you**10086 or 10010 say that the mobile phone is not on the Internet, you report the model of your mobile phone, and the customer service will send you the parameters in the form of SMS.

You first check the network access point settings of the QQ browser of your mobile phone, and use a WAP or NET access point. If it doesn't work, empty the record in the QQ browser of the mobile phone, restart the phone, and try again. If it doesn't work, go to the mobile phone Tencent network to re**install!

Flash it. The screen may be broken if it is not pressed accurately.

Hello, according to your needs, the Tianyu Bumblebee W806 screen is an inch, multi-touch, IPS high strength, 16 million colors, capacitive touch screen.

Tianyu W806 mobile phone configuration is as follows:

The W806 uses Alibaba Cloud system.

The CPU uses an NVIDIA Tegra 2 processor, with a clock speed of 1GHz.

RAM 1G + ROM4G

The display adopts inch, multi-touch, IPS high intensity, 16 million colors, capacitive touch screen.

Camera It has a 5-megapixel camera on the rear and a 300,000-megapixel camera on the front, and it is equipped with a flash.

Sensors are equipped with light, distance, gravity sensors, a digital compass and a three-axis gyroscope.

Bluetooth is equipped with a version.

GPS support.

WiFi support.

WiFi hotspot support.

Built-in fuel gauge Yes.

The battery capacity is 1800mAh

inches 800x480 pixels... The other configurations are very worthy of this**! Dual-core!

Hello, according to the situation you described, it is recommended that you do it in the following way:

1) You can enter the recovery mode first, and then do double clearing.

2) How to enter recovery: Press and hold the volume up button + power button, wait until the red screen is released, use the volume button to select the two lines of English at the beginning of wipe, please press and hold the power button to confirm, and then select the first item to restart the phone.

3) If not, it is recommended that you contact the after-sales service center of Tianyu to check.

The address of Tianyu National After-sales Service Center.

Did you delete the desktop?

Hello, depending on the situation you described, it is recommended that you follow the following method:

1.If it is not effective as a whole, it is generally the failure of the display circuit of the hardware. It is recommended that you go to the workshop for repairs.

2.If it is not working somewhere in use, the thickness of the film will also affect the touch screen, so it is recommended that you take the screen off and try it.

3.If it still doesn't work, it is recommended that you contact the Tianyu after-sales service center to check.

The address of Tianyu National After-sales Service Center.

Hello, depending on the situation you described, it is recommended that you follow the following method:

1.If the screen is white when turned on, it is generally a hardware display circuit failure. It is recommended that you go to the workshop for repairs.

2.If it occurs occasionally in use, it may be related to the system, you can restore the factory settings first.

3.If not, it is recommended that you contact the Tianyu after-sales Zhaoyuanpei Service Center to check.

The address of Tianyu National After-sales Service Center.