Why did Chopard watches suddenly go so slowly?

1. Insufficient activity energy, resulting in insufficient kinetic energy.

For automatic mechanical watches, if you wear them normally for 8 hours a day, the normal amount of exercise can support the time, generally speaking, the watch can walk normally for 36 hours, if you don't wear it often, the duration of the goods is not long, that is the reason for the lack of energy, if there is enough energy every day to support the rotation of the watch and there is a big deviation, you need to go to a special institution to check what the situation is.

Second, the watch is magnetized.

Generally, when the watch is close to the magnetic field, such as placing it next to a speaker or computer at home, it is easy to disturb the normal walking of the hands, resulting in slow walking or stopping walking. If your watch is getting slower and slower within a year of buying it, it may be that the watch has come into contact with magnetic items, you can go to the repair center to demagnetize, and then please avoid the contact between the watch and the magnetic items.

3. The oil of the movement is dry.

If you wear it for a long time, it may be that the oil in the watch movement is dry, the rotational friction resistance of each part becomes larger, and the watch will slow down, and you have to oil the movement, otherwise it will cause the parts to be worn out for a long time.

What is the reason why the watch is always slow?

1. Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is very small, the power reserve may be insufficient, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2. Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3. Hit or impacted: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems.

4. Need for maintenance: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained and sent to the designated maintenance point for maintenance services.

5. In addition to the above common situations, the watch is magnetized under the influence of some ambient temperatures: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error.

But you don't need to worry, please send the watch to the designated repair point for professional inspection and adjustment, and the watch can be restored to the normal error range.

The watch is rusty because it has been worn for a long time, so it walks very slowly.

Chopard watch slow after-sales maintenance center is located in Room 1502, Block A, Victory Plaza, Office Building, No. 103, Tiyu West Road, Tianhe District, Guangzhou.

Aftermarket**Chopard watch after-sales service center.

Chopard watch does not go for what reason how to deal with it.

The best way is to send it to the regular watch maintenance service center for professional maintenance as soon as possible, because it is not possible to determine the specific reason for the watch not to go and delay the maintenance of the watch, which will cause more serious damage to the watch and increase the maintenance cost.

There may be many reasons why Chopard watches do not go, when the wearer accidentally causes the watch to get water or moisture, and fails to get timely and thorough treatment, resulting in the situation caused by moisture erosion of parts afterwards; Although the quartz watch will not be magnetized, it will stop in a strong magnetic field, and it should be kept away from the magnetic field or the TV, radio and other objects that will produce a magnetic field; If the watch is not worn, it should be removed and habitually put back in the watch box, and should not be placed in a wardrobe with mothballs, and the mechanical watch should be manually wound regularly to keep the watch in running condition.

The main reason for the stop of automatic mechanical watches is because of lack of power, especially in the office, because of the long-term operation of the hand as a computer, so the watch is also prone to lack of power in a relatively stationary situation, you can first wind up in the morning, and then observe whether there will be a situation of stopping, if this situation still occurs, it is recommended that you go to a professional repair shop to find a master to check the reason.

Hello, first you have to confirm that the second hand does not go, and the hour hand du and the minute hand continue to go?

If it's just that the DAO second hand doesn't go, that.

The internal problem is in the movement gears, but the capacity is stuck;

If the hour, minute, and second hands don't move, there are two possibilities for your watch:

1. The lubricating oil of the movement is exhausted and needs to be maintained.

2. The movement is damaged.

1. Lack of power: Yes.

Some friends do not wear watches every day, or wear them for a short time every day, which leads to the lack of power of automatic watches and the watch does not go. Automatic watches wind the watch by moving the arm, and if you don't exercise enough or don't wear it, the watch won't go. This principle is the case with various brands of automatic watches.

The solution is to wear more, exercise more, and remember to wind it when you don't wear it.

2. The watch hand touches the watch mask: the second hand is too high or the second hand is uneven, and the center hole of the main plate is worn, which will cause the concentricity of the center tooth shaft and the second tooth shaft to decrease, and the watch glass is deformed. The way to repair it is to go to a professional watch repair shop to open the cover and overhaul it.

3. The watch hand touches the dial: the hour hand touches the dial or trademark, and the hour hand rubs against the dial, sometimes although it will not cause the watch to stop, it will affect the duration of the time, and even scratch the dial surface. The way to repair it is to go to a professional watch repair shop to open the cover and overhaul it.

Our mechanical watches often have the situation that the time is not accurate, and most people think that the mechanical watch is not broken.

There are many reasons for the theft of mechanical watches, mainly the following main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

The easiest way is to take it to repair, but it may be the following situations, 1, card on the Xuan 2, the second hand is loose,,, shake a few times to see if it works, if it doesn't work, you can only send it over for repair.

You first confirm for yourself whether only the second hand does not go, the others are normal, if everything else is normal, it is estimated that it is stuck on the hyun.

The watch is a part of our life, the second hand of the watch does not go, don't blame him, let him rest, think about it from his point of view, if it were you, what would you do, when you are tired, just think about the watch, he is very tired, and he really can't stop. You, not the most tired, but he, as a tool to control time, can't cut corners and leave a little time for him to rest.

At the same time, we should cherish our watch, if we know how to cherish her, he will not lose his temper.

Secondly, I wore the watch for a long time and found a rule, if the watch is worn on the hand all the time, it will not be so easy to break, he also seems to have feelings, and he can't let him get cold. Carry it often, and you will find that he is not so easy to break.

The second hand of the watch does not go, what is going on? Table, just like your friend, you have to warm him up from time to time and keep in touch with him from time to time in order to keep the friendship going. Friend, they have helped us so much, and we, when we don't need to, don't think of him.

Or don't think of him until they strike at you, will it be too unfair to him, watch, has been working for us, and we, without a word of gratitude, we don't have to say anything, just cherish her, just love her.

The second hand of the watch is gone, put it on, perhaps, after you put it on, it won't be long before you will walk by yourself.

Chopard watches are not gone, and the repair location is at the South Block of Hong Kong Plaza, No. 283 Huaihai Middle Road, Huangpu District, Shanghai.

Room 04-05, 11th floor, public building. Expert.

Because of long-term wear, the watch strap will bear the brunt of wear and tear, and it is easy to have problems such as poor buckle of the strap, screw bolts or other types of connections that are tied out or falling off, scratches on the surface, and fading of the gold plating layer.

Hello, the watch hands are not moving, there are the following solutions:

1. Take it directly to the store for maintenance.

Whatever the reason. For the stop problem caused by the collision, the general layman can not get it, only let the professional maintenance person can help you repair it, so the more direct way is to take the mechanical watch to the watch shop for maintenance. Let the professional staff help you repair, they can also tell you more accurately the extent of the damaged layer and how to repair it.

2. Replace the mirror.

If it is caused by damage to the mirror, you must replace the mirror first, and clean up the internal debris by the way. This method can directly solve the problem of the watch stopping. Note that if you are not a professional maintenance personnel, it is recommended that you do not act rashly, so as not to repair the watch more and more bad, and the result will outweigh the losses.

3. Full clockwork.

Generally speaking, there is a certain very common factor for mechanical watches not to go, and that is the lack of power. Usually you just need to wind it by exercise or by hand.

4. Reinstall.

If the second hand falls off and detaches from the second wheel shaft due to a serious collision, you must find a watch repairer to reinstall it. However, if the second wheel shaft on which the second hand is installed is broken, then the second wheel (mechanical) must be replaced, and the quartz watch movement is not easy to change (if it is a commonly used model, it is OK, but the watch repair is generally not replaced), and the watch movement is changed.

However, it is still recommended to go to a professional Cartier after-sales maintenance service center for processing and repair, I know that there is one in Beijing.

Room 1102, Block D, Central World Trade Center (Bloomage International Center), No. 6A, Jianguomenwai Street, Chaoyang District, Beijing).

Hope it helps.

Reasons why the watch doesn't go:

The main problems such as the misalignment of the core gear, the magnetization of the watch, the bump, and the long shelving time and the oil sludge are dry. The most common reason for the failure of the watch is that the watch lacks power and the watch movement does not work.

When the mechanical watch suddenly stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

It is recommended to go to the regular point system of after-sales maintenance for the recurrence of the watch, not only the technician is more professional, the instrument is also more precise, and there is zhi** penetration

Bright and not chaotic**. My personal advice is to pass as soon as possible, otherwise the longer the time, the greater the problem with the watch, and the greater the economic loss. The main thing is that it is still more troublesome, and the repair time will become longer.

The after-sales center of Chopard watches is copied at:

BAI Room 1003, 10th Floor, Hongyi International Plaza, No. 299 Nanjing East Road, Huangpu District, Shanghai, when your watch has a faulty sales DAO, you should go to the regular after-sales center, and the watch will be comprehensively maintained and inspected by professional technicians.

What is Face-to-Face Service?

It's like etymology. "Full service" refers to the comprehensive inspection of the watch, the most important of which is the inspection and maintenance of the movement. Just like your car, regular inspection and maintenance is a prerequisite for normal use.

What does the full service do?

It is mainly divided into 4 processes: pre-inspection observation, cleaning and grinding, service maintenance, and time simulation and inspection.

The reason for the watch to stop is bai:

The kinetic energy is insufficient, and the automaton is to use the arm activity to complete the winding dao. If the watch is placed for too long or the amount of arm movement is less every day, the clockwork energy of the watch will be due to insufficient winding, and it is easy to produce inaccurate time or night stopping.

The hairspring is faulty, and the clockwork will be tighter if the amount of exercise is large. If there is a problem with the upper bar mechanism that causes insufficient power, it generally appears between 9 o'clock and 12 o'clock in the evening, "with a calendar function table" because at this time the hour wheel begins to drive the calendar wheel, and the load is large, if the power is insufficient, it is easy to stop during this time period. This time should not be reversed dial pin, now many mechanical watches use plastic parts of the calendar wheel, accidentally will break the gear, once the tooth is broken, every day at this time will be stuck, or to a fixed date will no longer jump.

As a result, the mechanical watch was stopped.

Bump failure, the watch is a precision instrument, once the bump receives a violent vibration, then the parts may fall off or damaged, you can make the watch steal stop.