How to distinguish formaldehyde smell from wood smell

Formaldehyde scavenger actively adsorbs, captures and reacts to formaldehyde free molecules, and once the reaction generates non-toxic polymer compounds, so as to achieve the purpose of quickly and effectively eliminating formaldehyde, but it is a high concentration of chemical substances, and it is recommended that you use it as little as possible. Compared with chemical aldehyde removal methods such as formaldehyde scavengers, the following physical aldehyde removal methods are worth a try.

1. Activated carbon.

Activated carbon to remove formaldehyde is the most commonly used way to remove formaldehyde in life, and the cost is low, but activated carbon is prone to adsorption saturation in a short period of time, and it needs to be replaced or dried after saturation. Another point to note is that if the amount of activated carbon is not enough, it will not play much role in removing formaldehyde indoors.

2. Ventilation. The most common way to remove formaldehyde indoors is to open windows for ventilation, and this method has almost no cost. But the ventilation method also has disadvantages, first of all, the location of the house should be good to achieve the effect of ventilation, and secondly, the formaldehyde in the decoration materials is in a state of continuous release, and it is impossible to completely remove formaldehyde through window ventilation, it can only play an auxiliary role in removing formaldehyde.

3. Plants. The use of green plants to purify formaldehyde is a very promising way to remove formaldehyde, plants will adsorb a part of formaldehyde during photosynthesis, but the absorption is extremely small, and it is recommended as an auxiliary method when removing formaldehyde.

Fourth, the Wise Stone. Ruishi is a new generation of air purification products, mainly used to eliminate formaldehyde, benzene, TOVC and other harmful gases released by interior decoration materials and various items, the adsorption capacity is dozens of times that of activated carbon, but also has the function of decomposition, and no need to dry, easy to use.

Fifth, high temperature. The release rate of formaldehyde mainly depends on two factors, one is temperature, the other is humidity, so we can use this characteristic of formaldehyde, use heaters, humidifiers, etc. to keep the room in a state of high temperature and high humidity, and then we can cooperate with ventilation or adsorption materials to absorb the formaldehyde that has been released at home, this method is mainly to treat the latent formaldehyde in the home, and the effect is very good.

Sixth, Muguang blue.

It is a high-quality formaldehyde removal product that has a better effect than photocatalysts. After use, it can quickly penetrate into the inside of the formaldehyde pollution source, and the formaldehyde that takes 3-15 years to volatilize is released at one time, and then it is decomposed into harmless carbon dioxide and water.

By addressing indoor formaldehyde pollution at the source, it protects the internal and surface structure of the substrate without adversely affecting the aesthetics of the interior.

In addition to formaldehyde is to pay attention to the method, choose the right method, the work of removing aldehyde will be much faster, but can not be blindly chosen, now there is too much false information on the market, choose the wrong method, aldehyde removal is not timely, will damage people's health, the following is for you to introduce several methods of removing aldehyde, so that you can easily and quickly remove formaldehyde.

1. Opening the window for ventilation is the best way to remove free formaldehyde, when the window is opened, there will be a steady stream of fresh air to dilute the indoor air containing formaldehyde to achieve the purpose of purifying formaldehyde, but the window is easily affected by the weather, and the effect is also affected by the house type.

2. Muguanglan is a more excellent formaldehyde removal product than photocatalyst, which can quickly penetrate into the inside of the pollution source after spraying, and the formaldehyde that takes 3-15 years to volatilize is triggered at one time, and then decomposed into harmless carbon dioxide and water.

The product does not require specific reaction conditions, does not produce any harmful volatiles during the reaction, and does not cause secondary pollution. Solve the problem of indoor formaldehyde pollution from the source, without causing damage to the internal and surface structure of the substrate, while maintaining the indoor aesthetics.

3. High temperature and drying can accelerate the volatilization of formaldehyde and other harmful substances, so you can take out drawers, movable furniture, mattresses, etc., and take them to the balcony for ventilation and drying.

4. Ruishi is a pure natural ore, with regular honeycomb voids inside, its specific area is huge, it can efficiently adsorb formaldehyde, its adsorption capacity is strong, it can reach more than 20 times that of traditional activated carbon, not only has a large adsorption capacity, but also has an ion exchange function, which can decompose harmful substances such as formaldehyde into harmless carbon dioxide and water, and can be used for a long time without replacement.

5. Under certain conditions, the formaldehyde scavenger reacts with formaldehyde to generate other substances that are not harmful to health, so as to reduce the concentration of formaldehyde in the room. But it's also a chemical in its own right, and if used incorrectly, it can be another source of pollution indoors.

6. Use an air purifier to remove formaldehyde, which is a popular method in recent years, but now there are many brands on the market, and it is recommended to choose products marked with the function of "removing formaldehyde", you must be cautious when choosing, it is not recommended to choose below 1500, and the formaldehyde filter element also needs to be replaced regularly when used!

Formaldehyde volatilization above 19 degrees will be accelerated, if the indoor formaldehyde exceeds the standard, we can use some heating equipment to accelerate the volatilization of formaldehyde, and then release formaldehyde by opening windows for ventilation, but using heating equipment, you must be careful to avoid fire and other risks, and the following will introduce you to some methods of removing formaldehyde, so that you can remove formaldehyde efficiently.

1. Open windows for ventilation.

If you want to remove formaldehyde and odor as soon as possible, the first thing to do is to open the window for ventilation, open the cabinet doors and drawers at the same time, and dilute and discharge the formaldehyde to the outside through air convection. Although this step is simple, it is also necessary to pay attention to the weather conditions, so as not to break the newly renovated home environment with strong wind and rain.

2. Activated carbon.

Using activated charcoal is also a great option. The surface of activated carbon is rich in pores, which can adsorb the peculiar smell in the car, and also has a certain effect on pollution control, but the activated carbon treatment capacity is limited, and it will produce saturation after about half a month of use, and it is impossible to continue to work.

3. Muguang blue.

It is a high-quality formaldehyde removal product that has a better effect than photocatalysts. Although it requires strong operability and professional knowledge when it is used, it does not require any specific reaction conditions, and the reaction process will not produce harmful volatiles or cause secondary pollution. The product can solve the problem of indoor formaldehyde pollution from the source, without damaging the internal and surface structure of the substrate, and at the same time, it will not affect the aesthetics of the room.

4. Air purifiers.

The air purifier has a good filtering effect on odors and indoor pollutants, and can achieve the purification effect relatively quickly, but it needs to be continuously turned on 24 hours a day, and the purification range of each machine is limited, and each room needs to be configured, so the cost of using it will be relatively high, and the cost of using the whole house is a bit high, and families with enough budget can give it a try.

5. Fresh air system.

The fresh air system can ensure that the home is in a ventilated state 24 hours a day, which can greatly increase the exchange of indoor air and the outside world, although the effect is very good, but the first time of this fresh air system is more expensive, and it is a better choice to install it before decoration.

I'm afraid the subject has some misunderstanding about formaldehyde and wood, right? Personally, I suggest that you don't distinguish the smell of formaldehyde and wood, after all, you have less types of wood to touch, and you don't even know what formaldehyde is.

First of all, formaldehyde is colorless and odorless, not all wood products contain formaldehyde, but those synthetic wood products contain formaldehyde, like some bonded plywood, sandwich wood MDF, etc., not that the wood contains formaldehyde, but the glue that binds these wood contains formaldehyde, and these woods are almost very dry, the so-called wood smell is also very difficult to smell, plus the colorless and odorless formaldehyde, if you want to distinguish by smell, this is really too difficult.

At present, there are many ways to test formaldehyde concentration, some use a test agent, some use a tester, I personally don't believe in the data of the tester, although accurate, but this thing is not so good, and the test agent test results are more accurate. Therefore, I suggest that the subject don't think about how to distinguish the smell of wood from the smell of formaldehyde, directly after the decoration, use the test agent to test the indoor air, if the formaldehyde in the wood continues to volatilize in the air, then the formaldehyde will be tested by the test agent, if the concentration exceeds the standard, just find a way to clean it up.

You must know that formaldehyde is a carcinogen, and every time you inhale an extra breath of air containing formaldehyde, it may cause cancer, so don't distinguish the taste with that nose, quickly find a way to test it, and then find a way to remove it after the test. Personally, it is recommended to use chlorine dioxide, gases, powders, and liquids, which can decompose formaldehyde and decompose it into carbon dioxide, inorganic salts, and water. While using this thing, ventilating the room can speed up the volatilization and diffusion of formaldehyde.

1. Formaldehyde smell on furniture, sawdust smell, wood smell, wood residue smell, that is, the smell of wood mixed with formaldehyde, merchants generally say that this is the smell of wood, the wind is gone, in fact, it is formaldehyde. 2. The formaldehyde smell of cloth and curtains is usually emitted by a mixture of cloth and formaldehyde. It has a sour and pungent smell, like gasoline, but it smells worse than gasoline, a bit like burnt plastic.

3. The paint on the furniture is a mixture of benzene, formaldehyde, and banana water. When buying furniture, you must smell it first, don't believe that the merchant will be tasteless, brown mats, furniture boards and paints are the main ones of formaldehyde.

The smell of wood generally has a pure natural plant freshness, which will feel pleasant after smelling, while the formaldehyde smell is very pungent, which is unacceptable and harmful to the body.

Just a personal experience, my family renovated the house last year, I hope it can help you.

The smell of formaldehyde is very pungent, and when the concentration is high, the eyes will feel uncomfortable, and even tears, and you can't open your eyes. The smell of wood does not have a pungent sensation, and the eyes do not feel uncomfortable (except for allergies). Because the wood for home decoration is natural, unless you are allergic, you will not feel uncomfortable in your body, and you will even feel that the smell of wood is very fragrant.

If you want to see the indoor formaldehyde content after decoration, you can also find a formaldehyde test person to test it, ** is not expensive, generally 10 30 yuan.

It enters the human body through the respiratory tract, which is very harmful to the body, and long-term exposure to a high concentration of formaldehyde will lead to ** disease and respiratory diseases, so it is still necessary to pay attention to it, you can refer to the following removal methods:

1. Muguang blue, Muguang blue is a photocatalyst, which can effectively penetrate into the interior of decoration materials and has a high removal efficiency, 2. Odor machine, which removes aldehyde by filtering formaldehyde, is a very ideal way to remove aldehyde. Both of these treasures can be bought.

3. Choose a convenient formaldehyde removal method according to the characteristics of formaldehyde. In my new house, I used to spray formaldehyde in Quanshibang, and the effect is also very good, because formaldehyde is soluble in water, so it can be used in the air with higher humidity than normal, with activated carbon to help adsorb formaldehyde.

It is certainly useful to use a purifier to eliminate formaldehyde, but the effect is not very obvious, because the purifier can mainly purify dust, pollen, dust mites and bacteria and viruses in the air, giving everyone a clean breathing environment, which does not play a big role in formaldehyde. In addition, some air purifiers have a humidification function, which can humidify the air and avoid dryness, which is more comfortable for people with allergies and can effectively reduce allergies. In general, if you want indoor air ***, it doesn't hurt to have a purifier.

However, the choice should be based on their actual situation, the newly renovated house due to the heavy formaldehyde, the air purifier is not good in removing formaldehyde, you can use some Quanshibang formaldehyde remover to put in a corner of the room, photocatalyst wood essential oil can be brushed on the wooden furniture or floor to decompose the formaldehyde off the effect is good. Or keep the indoor ventilation, raise more green plants, the best plants to absorb formaldehyde are spider plants, pothos, we have prepared a lot of green plants when we decorated our home before, and the effect of absorbing formaldehyde is very good.

In fact, the most effective way to remove formaldehyde, I used to spray the whole Shibang these can effectively remove formaldehyde, three months into the taste, is from the material, materials and other sources to solve, if has caused the facts, then the next method is more difficult, some people through the method of covering and sealing, some people use a variety of plants to adsorption, can only reduce the harm of formaldehyde, can not avoid its harm, the existence of formaldehyde, sometimes to prevent our home from the threat of pests and diseases and preservatives.