Meals are often clogged with grease and often clog kitchen drains, what are the ways to dredge them

Updated on home 2024-06-27
14 answers
  1. Anonymous users2024-02-12

    First, a pipeline dredging agent is used. Clogged sewers are a nuisance. If not dredged in time, water accumulation will occur.

    The most effective method of pipeline dredging is to use pipeline dredging agents. If there is no water in the drain, **half a cup of water. At this point, the pipes are boiling.

    After about 20 minutes, rinse with plenty of water. Second, caustic soda is used. It is estimated that many people have heard of caustic soda, which is highly corrosive.

    You can unclog the drain with caustic soda. The method is simple: put caustic soda in the drain mouth and pour in a pot of boiling water.

    This is not a warm pot, but a large pot of water. Similarly, you can use soda and vinegar to unclog your drains. Third, boiling water.

    The causes of clogged sewers are varied. We should take measures accordingly depending on the cause of the blockage. If the sewer is clogged with oil, you can use boiling water.

    Of course, if you can buy concentrated sulfuric acid, the effect will be even better. To ensure the safety of our lives, we need to be careful with the use of sulfuric acid. Fourth, spring steel wire.

    If the sewer is clogged with hair or debris, you can buy a spring steel wire of about 2 meters in the market, and then bend it 10-20 degrees at the top 1-20 cm, dredge it back and forth at the inlet and outlet of the sewer, and rinse it with water, you can also achieve a good dredging effect.

    Also, finally, laundry detergent. If your pipe blockage is not severe, I will teach you a very environmentally friendly method of dredging. Start by pouring a tablespoon of laundry detergent into the water pipe, then pour in 3 cups of hot water.

    If this does not unclog the drain, pour another glass of vinegar to soften the stain and unclog the drain. The above is about the method of dredging sewage pipes, as well as the relevant sharing of five commonly used methods of dredging sewage pipes.

  2. Anonymous users2024-02-11

    You can use chemical principles to solve oil blockage, you can use the cleaning agent dissolution method, you can also take the disassembly and cleaning method, the boiling water dissolution method, and the pipeline dredging agent, which are all very good methods.

  3. Anonymous users2024-02-10

    Usually do not pour the food directly into the kitchen sewer pipe, you can add baking soda or white vinegar, you can also add decontamination powder to it and rinse it with hot water, wash it several times.

  4. Anonymous users2024-02-09

    Solidification of food often clogs kitchen drains, and the way I know is to boil a pot of boiling water and flush it down, or to buy a soft elbow to poke the drain through.

  5. Anonymous users2024-02-08

    1. Rice washing water, baking soda.

    Rice washing water has a strong decontamination ability, and when used with baking soda, the cleaning effect will be doubled.

    The method is to add a small amount of rice washing water and an appropriate amount of baking soda, mix well, pour it into the drain, and wait for 10 minutes to see the effect.

    2. Laundry detergent.

    Laundry detergent not only has the ability to remove stains, but also dissolves oil stains.

    Method: Add an appropriate amount of laundry detergent to three cups of hot water, add a little vinegar, mix and pour into the drain.

    3. Round wooden sticks.

    In addition to using chemical principles to solve oil blockages, it can also be solved by physical means.

    Find a stick that is slightly smaller than the diameter of the drain, tie a towel, put some water in the sink, and quickly pump the stick up and down to poke the garbage and oil clogged in the drain and the kitchen drain will be unblocked. And it can not only solve the problem of oil pollution, but also if the sewer is blocked by solid objects such as bones, it can also be solved by this method.

    Ways to prevent sewer blockage:

    1. You can install a filter screen device at the drain of the sink and clean the filter screen frequently.

    2. Before washing the tableware, it is best to remove the grease and leftovers from the tableware, wash it with warm water, or pour it directly into the trash.

    3. When the weather is cold, the grease on the tableware will solidify, and it is very likely to adhere to the sewer pipe wall.

    4. When using the kitchen sink, if you want to clean more tableware, vegetables and fruits, remember to fill the water in the sink, and after cleaning, the dirty water in the sink should be put away at one time, so that a certain impulse will be formed to wash away the dirty things in the sewer, and the oil stain on the sewer pipe wall is not easy to form.

  6. Anonymous users2024-02-07

    The kitchen drain is always blocked, it turns out that it is because of grease, how to solve it.

  7. Anonymous users2024-02-06

    Answer 1, directly pour hot water, because the pipe is blocked by some oil, hot water can effectively dissolve the oil, directly boil a pot of boiling water, quickly pour into the sewer pipe, the stain can be dredged when dissolved. 2. It can also be used to pump and dredge the method, with a pump hose directly into the sewer mouth, and then continue to pump and pour water, which can also play a certain role. 3. Through the water pressure, increase the water pressure, connect the faucet and the sewer pipe with a plastic pipe, open the faucet to the maximum, continuously fill the water, and through the high-pressure water flow, it can play a role in dredging.

    4. If the above methods still do not work, it is necessary to use a combination of dredging agents to effectively dissolve the dirt. Baking soda and white vinegar are both able to quickly dissolve stains. In addition, it can also be diluted with hydrochloric acid and poured into the sewer, pay attention to be diluted, otherwise it is easy to corrode the inner wall of the pipe.

    Not only can it be dredged, but it can also play a disinfection role. 5. If there is no effect, the ultimate method is to disconnect the connection of the pipeline interface and remove the debris on the inner wall of the pipeline, so as to solve the blockage problem from the root.

  8. Anonymous users2024-02-05

    The best way to unclog the kitchen drain from the oil stain is:

    Ingredients: baking soda, laundry detergent, grease dissolver.

    1. The kitchen drain is easy to be blocked by oil, and we can use baking soda to dredge it. Baking soda contains sodium bicarbonate, which has strong detergency; We first pour some boiling water into the drain, then pour in baking soda and white vinegar; Baking soda reacts with white vinegar to promote the dissolution of oil stains; Wait until the bubbles are gone, and then pour hot water into the drain.

    2. The detergent has a very strong ability to remove stains and grease stains, you can pour the laundry detergent into the kitchen drain, and then pour an appropriate amount of boiling water; Or we mix hot water, vinegar, and laundry detergent, pour it into the drain, and repeat it several times to dredge the drain. You can also consider using caustic soda to unclog the sewer, we mix caustic soda with hot water and pour it into the drain slowly. Caustic soda is very corrosive, so you should be careful when using it.

    3. We can also consider using pipeline oil scale dissolving agent products to dredge the sewer oil blockage, which can quickly emulsify the oil pollution; Or we pour boiling water into the sewer, and then use a thick iron wire to quickly poke a few times to dredge the sewer; The kitchen drain is clogged, you can buy a spring wire pipe dredging tool to dredge it and so on.

  9. Anonymous users2024-02-04

    Look through it yourself, but watch out for PVC or cast iron. Buy a 2-meter pipe dredger at a street stall, bend it 2 cm at the head, put water into the dredger at the outlet, shake it in, and then put it into the dredger at the inlet at the same time as the water is released, and you can repeat it several times. At the same time, it will be dredged every other week in the future.

    Laundry detergent can also be used**. This is because laundry detergent actually has a good degreasing function. Wash with oil.

    The "Love Life" sold on the market is clean and clean, with a net content of 500 ml in the barrel. Spray about 5ml into the sewer pipe each time, stay for about 5 10 minutes, so that the oil stain can be fully decomposed. Then rinse the kitchen drain pipe repeatedly with warm water until the water runs smoothly.

    If the main pipe of the kitchen drain is clogged, it is usually more likely to be clogged by debris, so we need to clean the drain from the debris. You can use a long-handled pick-up device that can reach into the sewer to pick it up, and it can be cleaned while draining, which helps to unclog the sewer. When the weather is cold, the grease on the dishes will solidify and will most likely stick to the walls of the sewer pipes.

    It is recommended to scald the sewer pipe with boiling water every once in a while (if the quality of the sewer pipe is not too hard, do not use water that is too hot, the pipe is easy to deform), which can effectively prevent the sewer pipe from being clogged by oil.

    The easiest and most practical way is to go to the supermarket and buy a bottle of pipe unclogging agent. It is suitable for blockage caused by hair, paper, greasy matter in sewer pipes, etc., and is widely used in hotels, restaurants, homes and other places, such as vegetable washbasins, wash basins, floor drains, bathtubs, toilets, etc. There is sludge in the kitchen drain and it is easy to clog.

    How to clean?Usually, when using the kitchen, some kitchen waste can be emptied into the trash can. If you can't get through, you can also find a professional to unclog the pipe. Rice washing water has a strong decontamination ability, and when used with baking soda, the cleaning effect will be doubled.

    The method is to add a small amount of rice water and an appropriate amount of baking soda, mix well, pour it into the drain, and wait for 10 minutes. This completes the cleanup.

  10. Anonymous users2024-02-03

    It can be dissolved with baking soda and boiling water, or a special unclogging agent can be used. The pipes can be removed to clean up the dirt inside.

  11. Anonymous users2024-02-02

    Buy a pipe unclogger, put one end of the pipe unclog in the sewer pipe, the other end to the faucet, and start flushing with water.

  12. Anonymous users2024-02-01

    Pipe unclogging agents can be used to unclog or poured directly into it with baking soda, which is very convenient to use.

  13. Anonymous users2024-01-31

    The kitchen will use water for washing vegetables and cooking, and after a long time, the sewer may cause blockage, so the sewer in the kitchen is blocked, and it is generally easier to dredge, so the following will teach you common dredging methods.

    1.When it gets clogged, we can try it out at home. We can buy a 2-meter pipe dredging device, bend its head, and then put the water into the pipe while collapsing, while shaking and shaking, repeating it a few times, and at the same time should dredge it every other week in the future.

    If a professional comes, you can use manual methods first, do not pour water, or you can surround the pool to prevent water from splashing. Of course, everything else has to be put away. And you have to make sure that it is dredged in a short time, otherwise the smell will be very strong.

    2.If the sewer is full of water, then we need to press the plug down hard, and then lift it hard, so that it will form a certain pressure and pumping force, which can flush away the clogged debris in the water pipe; But if it's stuffed too hard, I'm afraid only the serpentine pipe will do, and you can also use the wire mentioned above, but this is expensive and difficult to get, so it's easy to find someone to dredge it, and there is also a thing called pipe dredging agent, which is sold in supermarkets, so you can also try it.

    1.When we use it, we accidentally discharge foreign matter, and it is difficult to discharge it when it gets stuck in the water pipe, which causes the sewer to be blocked.

    2.The water pipes have been used for a long time, and there are excessive oil stains and dirt accumulated in them.

    3.If your tuanshen sewer pipe is relatively small, and it is not straight, and there are many elbows, then it is easy to have sewer blockage when you use it.

    4.There is also a situation where we accidentally drop cement into it during installation and construction, which causes a blockage in the sewer.

    1.Most of its clogging is caused by grease, so it is recommended that we can remove the grease from the plate first when we wash the plate, or try to wash it with warm water.

    2.In the mouth of the sink, we need to clean the surface of the garbage in a timely manner, and it is best to install a filter device, and then clean it regularly.

    3.When the water in the sink is used up, we can first put the dirty water in the sink at one time, and when the water flows out, this can form a certain momentum, flush the swag in the sewer, and the garbage on the pipe wall is not easy to form.

    4.When the weather is cold, we can use hot water to scald the pipe about once a week, but it should be noted that the temperature is not too high to scald, so as not to deform the pipeline, so as to effectively prevent the blockage of the pipeline, or even avoid the blockage of the pipeline.

  14. Anonymous users2024-01-30

    The solution to too much grease and clogged kitchen drain is as follows:

    Tools: rice washing water, baking soda, alkali, laundry detergent, boiling water, vinegar, pipe unclogging.

    1. The rice washing water itself has a strong decontamination ability, and with baking soda, the effect is even better. We just need to prepare a little rice and put it in a bowl, then mix it with the right amount of baking soda and water, then pour it into the clogged drain and wait for 10 minutes.

    2. Caustic soda, because caustic soda has strong corrosiveness, so it can corrode the residue inside the sewer, we prepare an appropriate amount of caustic soda, put it in a basin, add some hot water in it, the temperature of this hot water is about 60 degrees, and after the caustic soda and water are fully integrated, you can slowly pour it into the sewer, and wait for 20 minutes to only be able to see the effect of the dull lead fruit.

    3. Laundry detergent also has a strong ability to remove stains, and can also dissolve oil stains, if the sewer is filled with slag caused by oil stains, you can add some laundry detergent, and then mix 3 cups of hot water, if not, you can also add some vinegar.

    4. We all know that boiling water has the effect of decontamination, if the blockage is not serious, you can consider using boiling water for decontamination, but be careful not to pour too much at one time to destroy the pipe.

    5. If the pipeline needs to be bent, you can purchase a pipeline dredge to dredge the pipeline, and the pipeline can be dredged according to the requirements.

Related questions