The handle of my pressure cooker is broken, what should I do Can I fix it

Pressure cooker. The handle is broken, it can be repaired, and it can be replaced, just to say that this can be replaced with a new cover, and then you can replace the handle with a new one.

The handle of the pressure cooker can be installed from the new, and these can be replaced with something, so you can find a professional repair location and ask him to help you install a handle, even if it is definitely not possible to install it yourself, it is also unsafe, so be sure to repair it.

It can be replaced, you can buy accessories for replacement by yourself if you have the ability to do it, you can't go to the manufacturer for after-sales, and there are even mobile vendors to repair.

If the handle of the pressure cooker is broken, you can go to the place where the small appliance is repaired, and ask a professional maintenance person to help you replace it with a new handle. It doesn't cost much to change the handle of a pressure cooker, this one is very convenient.

However, pressure cookers also have a service life, if they have been used for a long time and have aged, it is best to change to a new pressure cooker, which is safer to use.

You can repair it, just take it to the home appliance maintenance gear on the side of the market and change the handle.

If the pressure cooker handle is broken, you can buy the same type of pressure cooker handle by yourself, or take it to a master who can repair the pressure cooker to replace and repair it. If it's an old pressure cooker that has been used for many years, don't fix it, just replace it with a new one.

If the handle of the pressure cooker is broken, it is very strict, and it will be inflated there, and it is very dangerous to suppress, so it will not be repaired if it is repaired.

The handle of the pot can be replaced. I usually have to buy this from the small commodity market. Be sure to buy ***.

The handle of the pressure cooker is broken, it is a small problem, and you can get one to the maintenance department, which does not affect the use.

What to do if the handle of the pressure cooker is broken? Can it be repaired? I think it should be no problem, you can take it to the place where small appliances are repaired and have a look.

What to do if the handle of the pressure cooker is broken? I think this should look at whether there is any value in repair? If the maintenance is high, it is better to buy a new one.

Buy a handle online and come back and install it yourself.

1.Go to the hardware store and buy a handle retaining ring to reattach the handle to the pot. 2.

Weld the handle to the edge of the pot with electric welding. 3.Buy a new handle and use super glue to glue the handle to the handle.

4.Take the pot to the repair stall on the side of the street, ask the master to repair it, and you can use it again. 5.

Use an electric drill to drill two fine holes on the side of the pot, and then drill two holes of the same caliber on the handle, fix the pot and the handle with screws, and you can buy a new one to replace it if the handle is broken, prepare a Phillips screwdriver, the fixing screw of the wok handle needs to be unscrewed first, and then connect the wok handle and the wok, and the fixing holes should be aligned. Place the screws into the holes and tighten them with a screwdriver. If the handle of the pressure cooker lid is loose, you can pry the half of the lid on the handle open, tighten the screws inside, and also tighten the big nut of the exhaust nozzle, otherwise it will come loose.

How to repair the pressure cooker is brokenHello, dear, the maintenance method of the pressure cooker: it is difficult to close the lid of the electric pressure cooker, the sealing ring is not placed, and the sealing ring is replaced; Or the float jams the pusher, and gently pushes the rod with your hand to make the float fall; It may also be that the lid and body of the pot are deformed, and the lid and body of the pot need to be repaired or replaced for the electric pressure cooker; If the self-sustaining valve does not fall, use a sharp object to make the self-locking valve. It is difficult to open the lid of the electric pressure cooker, if the float does not fall after deflation, use chopsticks to gently press the float valve; If the lid and pot body are deformed, the electric pressure cooker lid and pot body need to be repaired or replaced.

The electric pressure cooker float cannot rise, and the float valve sealing ring is not placed, and the float valve sealing ring is placed; Air leakage around the lid, check the lid and the sealing ring of the lid; If the lid seal is not placed, put the lid seal; If the float valve is broken, replace the float valve. The electric pressure cooker float leaks air after rising, if the float seal is stuck with food, it will also cause air leakage, and the seal needs to be cleaned; The float seal is worn out, and the float seal is replaced; The float valve is not tightened, tighten the float valve. The lid of the electric pressure cooker is leaking, and the sealing ring of the lid is not placed, and the sealing ring is put on; If the lid is not closed, the lid is closed; The sealing ring is glued with food residue, and the sealing ring is cleaned; The sealing ring is worn, and the sealing ring is replaced; Deformation of the lid and pot body will also lead to air leakage, and the lid and pot body need to be repaired or replaced; If the inner pot is deformed, the inner pot needs to be replaced.

I hope it can help you, if my answer is helpful to you, please give a like (rate in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. Finally, I wish you good health and a good mood!

Dear, glad for your question, the first step: find the computer control panel, the computer control panel of the electric pressure cooker is generally on the wall of the pot, we need to open the lid at the bottom. Step 2:

Disassemble and fix the fixing screws with a screwdriver. Step 3: Remove the base of the electric pressure cooker, the computer board is generally installed with the base, and the computer board can only be removed by removing the base.

Step 4: Disassemble the computer board After removing the base, you can see the screws that fix the computer board, at this time, use a screwdriver to unscrew the screws, and you're done. Step 5:

Replace the computer board with a new one, buy a computer board of the same model, follow the steps above, install the new computer board back into the electric pressure cooker, and then turn on the computer for a test run. That's all for me, I hope mine can help you.

How to repair the pressure cooker when it is broken, hello, 1. The reason for the difficulty in closing the lid: the sealing ring is not placed; Handling method of float stuck push rod: put the sealing ring; Nudge the putter with your hand.

2. The reason for the difficulty of opening the cover: the float does not fall after exhausting; There is pressure in the pot. Solution:

Gently press the float with chopsticks; Wait for the pressure in the pot to drop and open the lid. 3. Cause of air leakage of the pot lid: the sealing ring is not put on; Food scraps are stuck to the sealing ring; Broken seals; The lid is not closed.

Treatment: Put on the sealing ring; cleaning the seals; Replace the seal; Close the lid as specified. 4. Cause of float valve leakage:

The float valve seal ring is stuck with food residue; The float valve seal is broken. Treatment: Clean the float valve seal; Replace the float valve seal.

5. The reason why the float cannot rise: too little food and water in the pot; The lid or pressure limiting exhaust valve is leaking. Solution:

Put food and water as prescribed; Send it to a repair point for repair. 6. The reason why the energized light is not lit: the power socket is not in good contact.

Solution: Please check the power outlet. There are many common faults in electric pressure cookers, such as difficulty in closing the lid, difficulty in opening the lid, air leakage from the lid of the pot, leakage of the float valve, failure of the float to rise, and failure of the light on.

I hope my answer is helpful to you, and I wish you good health and a happy mood! <>

Method 1: You can put plastic bottles.

Instead of the lid handle, first cut off the bottle part of the plastic bottle, pay attention to the bottle body part when cutting, and then poke a small hole in the middle of the bottle cap after cutting, this hole should be screwed with the pot lid.

The diameter of the same. Then put the cap on the lid of the pot, tighten the screws, and tighten the plastic bottle.

Method 2: Or use the long tail clip as a temporary handle, remove the handle of the long tail clip, and jam it in the hole of the pot lid. Then remove the other handle of the long tail clip, buckle the handle on the top of the pot lid, and then snap it back on.

Method 3: You can also use the handle of the soy sauce bucket as the handle of the pot lid, as long as the handle of the soy sauce bottle is removed, and in the middle of the handle, poke a small hole with a knife, and the size of the small hole should be consistent with the diameter of the screw. Then thread the screw through the hole in the handle, and then thread it together to the lid and fix it with a nut.

Summary. How to repair a broken pressure cooker is as follows: first check whether the pressure cooker has an electrical short circuit, whether the controller is faulty, and check whether the safety valve and high-pressure pipeline are leaking.

2.Inspection and maintenance: first disconnect the power supply of the pressure cooker, check the shell, connecting pipes and internal electrical system of the pressure cooker in accordance with the high voltage safety requirements to ensure the internal safety of the pressure cooker, and check whether the connection of the safety relay and other electrical equipment on the electrical system is firm.

If there are any errors, they should be corrected in a timely manner. 3.Carry out repairs:

If the fault may be caused by the failure of the high-pressure pipeline or safety valve or other electrical system, it should be repaired or replaced. After maintenance, the high-pressure pipeline should be inflated and inspected to ensure that the gas pipeline is safe and usable. 4.

Test operation: When the pressure cooker completes the installation and secondary maintenance, the test of low temperature and low pressure operation should be carried out first to verify the operation status of the system. After the test is completed, the pressure cooker can be used normally.

How to fix a broken pressure cooker.

How to repair a broken pressure cooker is as follows: first check whether the pressure cooker has an electrical short circuit, whether the controller is faulty, and check whether the safety valve and high-pressure pipeline are leaking. 2.

Inspection and maintenance: first disconnect the power supply of the pressure cooker, check the shell, connecting pipes and internal electrical system of the pressure cooker in accordance with the high voltage safety requirements to ensure the internal safety of the pressure cooker, and check whether the connection of the safety relay and other electrical equipment on the electrical system is firm. If there are any errors, they should be corrected in a timely manner.

3.Carry out repairs: If the fault may be caused by the failure of the high-pressure pipeline or safety valve and other electrical systems, it should be repaired or replaced.

After maintenance, the high-pressure pipeline should be inflated and inspected to ensure that the gas pipeline is safe and usable. 4.Test run:

When the pressure cooker is installed and maintained, the test of low temperature and low pressure operation should be carried out first to verify the operation status of the system. After the test is completed, the pressure cooker can be used normally.

A pressure cooker, also known as a pressure cooker, is a kind of kitchen cooker. The boiling point of a liquid at a higher air pressure is elevated by a pressure cooker, allowing water to reach a higher temperature without boiling, thus speeding up the efficiency of stewing food. What else can help you, dear, I hope it can help you, I wish you a happy life