The sewer pipe will accumulate oil after a long time, how to deal with the oil accumulation to preve

To teach you a little trick, we can boil water in a kettle and pour it into the pipe, so that the temperature of the hot water can wash away the oil in the pipe, which is very simple.

Chemicals can be dissolved in special pipes. You can add some hot water to the pipe, which can play a certain role.

Take a chemical approach Prepare baking soda and white vinegar, mix it with boiling hot water, and pour it directly into the sewer pipe, because both white vinegar and baking soda can dissolve stains.

Method 1: Find a professional plumber to get through the pipes.

Method 2: It stands to reason that the oil will not agglomerate under normal circumstances, but in the case of narrow pipes, in a colder environment, it may condense, there is no special way, the pipe is insulated, the pipeline is thickened, the sharp bends are reduced, etc., after the blockage, boil the water to irrigate, but this method depends on the location of the blockage, if it is far away from the drain where you pour hot water, and there is already stagnant water in it, it is not good, you can pass it first, wait for the water, and then pour hot water, pour more, hot water can dissolve oil, But if it is dirty, it is not easy to make hot water, and how to get it has to be analyzed specifically.

Method 3: Pipe grease dissolver can also be used. It is specially used to dissolve all pipes such as kitchen pipes, sewer pipes, factory pipes, etc., which are clogged due to oil condensation and form oil scale, which has the following characteristics:

1. Quickly dissolve oil and grease, so that the oil and grease cannot be attached to the pipeline, and the water is flushed. Solve problems that cannot be solved manually.

2. Professionally dredge all kinds of grease pipelines. The pipeline grease dissolver is solid.

3. How to use: Put the pipeline oil scale dissolving agent into the pipeline, add water, and immediately dissolve the oil and oil scale, and use it immediately.

Do not use boiling water to pour into the pipe (PVC) I have done experiments, a pot of boiling water slowly poured into the pipe body will be deformed, the link will open glue. I used a big brand of pipe for the experiment, and if you burn the pipe, it will be miserable if you flush the downstairs.

The sewer can be said to be an important sewage facility in life, once the sewer is blocked, our life will also be affected, and in daily life, there is often the phenomenon of oil blocking the sewer, then, how to dredge the sewer pipe blocked by oil pollution, how to prevent oil from blocking the sewer? Let's find out.

1. How to dredge the sewer pipe blocked by oil pollution.

1. Take a chemical approach.

Prepare baking soda and white vinegar, mix it with piping hot water, and pour it directly into the sewer pipe, because both white vinegar and baking soda can dissolve stains. We will see that the pipe mouth may be blistering up, which means that the pipe has been unblocked, and if it is more serious, we can try a few more times.

2. Take a physical approach.

Prepare a round stick, slightly smaller than the diameter of the sewer pipe, to be able to stick into. Poke it back and forth a few more times to dredge some of the oil in the pipeline. Increase the hot water to rinse down, you can also use caustic soda, and the principle of baking soda and white vinegar is the same.

3. Other methods.

If chemical and physical methods do not work, it is recommended to unscrew the coupling of the water pipe, remove the hose, and clean the blockage from the sewer pipe. Some of them are because of the dirt that accumulates inside, which cannot be dredged, so it will be more thorough with this kind of use.

2. How to prevent oil from clogging the sewer.

1. Before cleaning the dishes, remove the grease on the dishes, and then clean them with warm water, the filter screen is generally installed at the drain port of the dishwashing barrel, in order to prevent the filter from clogging, it is necessary to regularly clean the filter screen into the mountain, so as not to accumulate too much oil and dirt on the filter screen, which will affect the smooth drainage of the sewer.

2. When draining the sewer in the bathroom, do not lift the lid of the floor drain, otherwise it will affect the drainage speed of the sewer, and will flush larger substances into the sewer, and at the same time will increase the amount of hair flowing into the sewer, resulting in the sewer being blocked by debris and hair.

3. Every once in a while, you need to use laundry detergent and boiling water to rinse the sewer, you can first boil a pot of boiling water, pour it into the basin, add an appropriate amount of washing powder, stir evenly and pour it into the sewer, so that you can remove the dirt on the sewer pipe wall to melt, this method is particularly effective in winter.

The above is all about how to dredge the oil clogged sewer pipe, how to prevent oil from clogging the sewer, I hope it can help you understand the oil clogged water pipe, more decoration knowledge, decoration company evaluation, decoration cases, please continue to pay attention!