What should I do if the bathroom at home is bulging on four walls due to water seepage from the main

First of all, the restroomGet into the waterThe water seepage of the pipes causes problems with the tiles, and the sewer pipes in the toilet are all normally on the floor, and the sewer pipes are very rarely on the wallsIn addition to special circumstances, such as the toilet and washbasin of the wall row, the problem of the wall drain sewer pipe is actually not difficult to repair, because the sewer pipe is all able to accurately determine the location, the destruction of a few wall tiles can also be carried out maintenance, this maintenance even the tiles do not need to be destroyed, of course, the master also needs to use his brains when repairing.

In the end, there is also a situation that is not necessarily due to the seepage of the sewer pipe, it may be the seepage of the water pipe of the wall and mistakenly thought to be the seepage of the sewer pipe, so you can contact professional and technical personnel to carry out the manometer for drinking water, and you can know whether there is water seepage through the piezometer, even if the water seepage maintenance occurs if the water pipe is all protected by the wall, it is very easy to go down, if it is the old way to walk the floor, then the maintenance is very difficult, It is also necessary to completely repair to solve this problem.

Naturally, the water pipes should be repaired first, otherwise the wall will need to be hollowed out for water seepage.

If the tile wall hollowing is not very serious, and the tile or ninety percent new, I propose to pry off the old tile with a special tile adhesive dry hanging glue and the like to restore, and then paste the concrete. If possible, it is best to renovate it again. The condition of water seepage is the most annoying and disturbing.

My house was experiencing water seepage.

Bathroom drain leakage, a period of time did not live at home, and when I went home, I found that the bathroom ceiling into the water dripping, it took my brother to remove the roof, and found that it was the sewer pipe seepage, at that time I thought it was the upstairs bathroom in the washing clothes caused by the tap water, hard work, open the door to see that there is no running water on the roof, how is it leaking, we have no such thing as our house downstairs, and then consider whether the sewer pipe is blocked. All in all, it was annoying to kill people, and the reason was not found, and it was not leaked after a few days.

The best thing to do is to find a property to repair the general manager, and then re-lay the bricks at your own expense.

For such a situation, you can find a professional maintenance personnel to check, or you can replace the sewer pipe, or you can remove the bulging wall, do a series of treatments for the base layer, and then re-apply the tiles.

I think you have the option of using a water retainer. Also, clean the sewer pipes. Or replace a sewer pipe, because it must be leaking.

I've dealt with these kinds of issues!

The reasons can be many!

1. If the packaging is from the first floor to the pipe, and the developer unifies the pipe, the water leakage will be complicated, and it may be a leakage from several floors and flowing down the water pipe.

2. The possibility of the upstairs is greater, if the upstairs water pipe is broken, it must be taken over again. If the leakage is not serious, it may seep down the floor tile joints when using water, then it is easy to do, you can use the Huabian to fill the material, the construction is very simple, and all the joints can be fully closed.

3. It is also possible for you to have your own home, of course, it is not very likely, because you turn off the water, there is a sand layer under the floor tiles, and the sand layer will store a lot of water.

It could be that there is a leak in the downpipe.