How to get the computer can t connect to the wireless network

1. Open the "Service" management interface first, find "DHCP Client", "Network Location Awareness", "IP Helper", "WinHTTP Web Proxy Auto-DiscoveryService", and "Network List Service" to see if the current status is "Running".

If the "Startup Type" is "Manual", right-click and click "Start" in this service;

If the "Startup Type" is "Disabled", right-click on the service and select "Properties", set the "Startup Type" to "Startup" on the interface that appears, click "Application", then click "Start", and then click OK.

Once all the services involved have been completed, try to reconnect to the wireless network.

2. Use the command to try to re-obtain the IP address.

Press the windows key and the R key at the same time, enter cmd and click OK, then enter "ipconfig release" and press the enter key, and then enter "ipconfig new" and press the enter key, it will try to obtain the IP address again, and you can test whether it can be successful.

3. If the above operation is invalid, you can try to reset the network configuration and then restart the computer for testing.

Press the Windows key and the R key at the same time, type cmd, click OK, then type "netsh winsock reset" and press the enter key, wait for the display operation to be successful, and then restart the computer for testing.

4. The above operation is invalid, you can try to reinstall the driver of the wireless network card and then test.

1.First, let's check if it's a wireless router issue. In order to confirm if there is a problem with the wireless router, we can remove it and use a wired Internet connection directly.

If you can access the Internet normally at this time, it means that there is a problem with the wireless router. If you can't access the internet normally, it's not a router problem.

2.Problems with wireless routers can be divided into hardware failures and setup issues. The likelihood of hardware failure is not high.

Usually, they are caused by problems with the wireless router settings. First of all, we need to confirm that the wireless function is turned on. Enter the router settings interface, find the wireless settings, and click Basic Settings to see if the wireless function and SSID broadcast are turned on.

3.When using a wireless network, it is important to see if the correct wireless password has been entered. If you change your password, don't forget to change the wireless password for your laptop that uses wireless Internet access.

4.There is also a "Wireless MAC Address Filtering" option in the wireless settings. You can control your computer's access to your wireless network through MAC address filtering.

The default filter rule is prohibited, which means that any MAC address added here will not be able to access the wireless network. , on the contrary is allowed. Although the average user will not set up a wireless network, only the entries added here will be able to access the wireless network, just in case.

5.A computer that does not have a wireless card driver cannot receive a wireless signal, but the driver needs to be installed according to the model. If you don't know, you can detect and install the software.

6.Although the possibility of hardware failure is small, it cannot be ruled out, but it is not easy to tell if they are faulty, so we put this reason last. Of course, you can try to replace it if you can. Confirm that there is no damage.

What should I do if my computer can't connect to the Wi-Fi?

Install the Driver Wizard with a network card driver.

There are diagnostics in it.

In ordinary life, whether it is a mobile phone or a computer, we can't do without wifi, but if the computer can't connect to wifi, how can we do it stupidly? Let's take a look at how to get the computer can't connect to the wireless.

What should I do if my computer can't connect to wifi?

Step 1: We right-click on the wireless network symbol in the lower right corner of the celery and open the network sharing center.

Step 2: Find "Change Adapter Settings" on the left side of the "Network and Sharing Center" and click to enter.

Step 3: The Wi-Fi connection in "Network Connection" may be grayed out, if it is gray, right-click, and then left-click "Enable".

Step 4: Another situation is that we open the network connection interface, and there is no "Wi-Fi connection" in it.

Step 5: Right-click on the "Computer" icon on the desktop and select "Manage".

Step 6: Select "Device Manager" on the left, Step 7:

Then click on "Network Adapter" on the right, if you don't find the exclamation point of the network controller, it may be caused by a hardware failure of the wireless network card. Or restart the computer, if it still doesn't work, it is recommended to reinstall the system.

Step 8: It is also possible that the wireless wifi function is turned off, just turn it on. Press the shortcut key FN+F2 to open it.

What are the uses of ant points?

How to cancel AlipayAlipayHow to cancel Alipay.