After installing the boneless wiper, how to remove the buckle on the rubber strip?

The rubber strip of the boneless wiper should be removed as follows. Remove the wiper before replacing the rubber strip of the wiper. The rubber strips at both ends of the wiper cannot slide back and forth, and the rubber strips that cannot slide are the parts we need to remove; Find the part of the rubber strip that slides so you can remove the clip that holds this end in place.

In general, the clips are not difficult to remove. If it's very tight, you can use needle nose pliers to help remove it. After the clamp is removed, you can see that the rubber strip to be replaced is fixed to the wiper through a metal buckle, at this time, we only need to pry up the metal buckle with the clip, etc., and the rubber strip can be removed.

<> we have found the part of the rubber strip that can be sliding, we can remove the clip that holds this end in place. In general, the clips are not difficult to get off. If it's particularly tight, you can use needle-nose pliers to help remove it.

After the clamp is removed, we can see that the rubber strip to be replaced is fixed on the wiper through a metal buckle, and then we only need to pry the metal buckle up with the clip, etc., and the rubber strip can be removed; When installing a new wiper rubber strip, you only need to reverse the steps just mentioned, but special attention should be paid to here that the metal buckle that fixes the rubber strip must be fixed tightly, otherwise the rubber strip will have a position deviation when it is used, which will affect the use effect.

Under normal circumstances, traditional wipers must be replaced once a year, while boneless wipers last two to three times as long as traditional wipers. It only takes two or three years to replace it. Boneless wipers are also very rare due to the fact that the wiper rubber strips are tightly catered to the laminated glass, which is often the case with traditional wipers.

Not only does it maintain the windshield, but it's also a great maintenance for the wipers themselves.

Do a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me more, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.

The first thing to do is to find a place where the strip can move back and forth, lift the wiper with a professional tool, and then cut the buckle from where it can be loosened. Try to use needle-nose forceps.

After finding the part of the rubber strip that can slide, remove it, fix it at one end, and push it up and down with the other end.

First blow the rubber strip with a heat gun, soften the rubber strip, and then remove the buckle forcefully.

Replacement method of bone rubbing adhesive strip;

1.Before you replace the wiper rubber strip, you need to remove the wiper first. Check that the strips at both ends of the wiper do not slide back and forth. What can't be slipped is the part we want to remove;

2.Once we have found the part of the strip that can be sliding, we can remove the clip that this end is used to hold it in place. Overall, it's not hard to edit. If it is particularly tight, it can be disassembled with needle-nose forceps;

3.After removing the clip, we can see that the rubber strip to be replaced is attached to the wiper with a metal buckle. Next, we just need to pick up the metal buckle with a clip or something, and the rubber strip can be removed.

4.To install a new wiper rubber strip, simply follow the steps just mentioned in reverse. However, special attention should be paid to the fact that the metal buckle that fixes the rubber strip must be fixed firmly, otherwise the rubber strip will be displaced during use, affecting the use effect.

The method of removing the clip from the rubber strip of a boneless wiper;

1.Before you replace the wiper rubber strip, you need to remove the wiper first.

2.Check that the strips at both ends of the wiper do not slide back and forth. What can't be slipped is the part we want to remove; Once we have found the part of the strip that can be sliding, we can remove the clip that this end is used to hold it in place.

In general, it is not difficult to remove the clamps. If it is particularly tight, it can be disassembled with needle-nose forceps;

3.After removing the clip, we can see that the rubber strip to be replaced is attached to the wiper with a metal buckle. Next, we just need to pick up the metal buckle with a clip or something, and the rubber strip can be removed.

4.To install a new wiper rubber strip, simply follow the steps just mentioned in reverse. However, special attention should be paid to the fact that the metal buckle that fixes the rubber strip must be fixed firmly, otherwise the rubber strip will be displaced during use, affecting the use effect.

When removing it, pay attention to the original factory has a buckle. Just press and push up and down. Some people believe that the longer the wiper blades, the larger the brush area, and the better the visibility.

In fact, the longer the wiper blade, the better. Lengthening the length of the wiper blades can increase the visual range of view, but it can also increase the burden on the wiper motor and wiper lever. Of course, it can be lengthened, but it must be guaranteed that it will never interfere with the normal operation of the wipers.

Once you find the part of the rubber strip that can slide, you can remove the clip used to fix this end, generally speaking, the clip is not difficult to get off, if it is particularly tight, you can use needle-nose pliers to help disassemble. After the clip is removed, you can see that the rubber strip to be replaced is fixed to the wiper through a metal buckle, and then you can remove the rubber strip by priing the metal buckle up with the clip.

It is best to take out the wipers and remove the buckles from them. If the buckle cannot be removed, some tools can be used to remove it. And if you want to replace it. Just warp that metal up and you're ready to take it off.

It should be pushed from the top down, and it should not be too hard, and it should be removed according to the diagram, so that it will be very convenient, and it will be fine.

1. First of all, put the wipers up.

2. Then remove the wiper from the metal swing arm.

3. A small metal hook occludes to fix the original rubber strip.

4. Pry the metal hook up and pull out the wiper strip.

5. Pry open the plastic plug of the wiper on this side.

6. Replace the new rubber strip, cover the plastic plug, clamp the metal hook, and make it bite and fix the new rubber strip.

1. First of all, put the wipers up.

2. Then remove the wiper from the metal swing arm or envy.

3. A small metal hook bite plays a fixed role on the original rubber strip of Futuanzhou.

4. Pry the metal hook up and pull out the wiper strip.

5. Pry open the plastic plug of the wiper on this side.

6. Replace the new rubber strip, cover the plastic plug, clamp the metal hook, and make it bite and fix the new rubber strip.

Boneless wiper replacement strip method, first find the sliding part of the rubber strip, remove one end of the fixed clip, the rubber strip is fixed on the wiper through a metal buckle, pry the metal buckle liquid up with the clip, and then remove the rubber strip, and then install a new wiper strip up, fix the metal buckle again, and finally install it back according to the original way. Generally, the wiper should be replaced once a year, and the boneless wiper should be replaced once every two or three years.

The boneless wipers fit more closely with the curved glass and are stressed more evenly, so the scraping process is quieter and smoother.

The steel sheet of the boneless wiper is better, it adopts a floating steel plate structure, which can reduce the jitter wear and prolong the service life.

It has a simpler mechanism, lighter weight and stronger adhesion.

Boneless wipers are composed of four accessories: wiper rubber strips, boneless wiper steel sheets, wiper protective sleeves and plastic parts.

The built-in steel sheet disperses the pressure, so the force of the Jiaochang buried stupid strip is more uniform, the wiper effect is better, the water marks, scratches, and noise are reduced, and the safety is higher in the use of the company.

Millions of car purchase subsidies.

The process of disassembling the boneless wiper film is as follows:

1. After looking for the rubber strip that can be rolled, you can remove this end of the clip used to determine, generally speaking, the clip will not be too difficult to get out, if it is especially tight, you can use diagonal pliers to help disassemble the hall.

2. After the clip is removed, we can see that the rubber strip to be replaced in advance is fixed on the top of the wiper according to a metal buckle.

3. The new wiper rubber strip only needs to be carried out in reverse according to the process just said, but it must be noted here that the metal buckle of the fixed rubber strip must be fixed and tight, otherwise the rubber strip will cause deviation of the part in the application, and then endanger the actual effect of use.

Under normal circumstances, traditional wipers must be replaced once a year, while boneless wipers have a service life of two to three times that of traditional wipers, and only need to be replaced once every two or three years. Because the wiper rubber strip is closely catered to the laminated glass, the boneless wiper is also very rare to have the condition of mixed grit between the brush blades often encountered in traditional wipers, which is not only the key to spring maintenance of the windshield, but also a very good maintenance for the wiper itself.

Millions of car purchase subsidies.

The steps to replace the boneless wiper film are as follows:

1. After finding the rubber strip that can slide, we can remove the clip used to fix this end, generally speaking, the clip is not difficult to get down, if it is particularly tight, you can use needle-nose pliers to assist in dismantling.

2. After the clip is removed, we can see that the rubber strip to be replaced is fixed on the wiper through a metal buckle, and then we only need to use the clip or the like to pry up the metal buckle to regret it, and then we can remove the rubber strip.

3. The installation of new wiper rubber strips can be followed as long as they are carried out in reverse according to the steps just mentioned, but special attention should be paid to here that the metal buckle that fixes the rubber strip must be fixed tightly, otherwise the rubber strip will be offset in use, which will affect the use effect.

In general, traditional wipers need to be replaced once a year, while boneless wipers have a lifespan of two to three times that of traditional wipers, as long as they are replaced every two or three years. Because the rubber strip of the wiper is closely attached to the glass, the boneless wiper rarely appears to be mixed with sand and gravel between the wipers that are often encountered in traditional wipers, which not only protects the windshield, but also a good protection for the wipers themselves.

First of all, you can turn on the wiper to the maintenance position, (the maintenance position is operated, and the wiper switch is turned down after the power is off). Then it is very convenient to lift the orange wiper, and then remove the wiper, as shown in the figure: press the positioning block to pull it up, it may be very light to prepare for the old You can try to slowly shake the imitation Wu Sheng until it is pulled out, be careful not to smash the wiper rod into the glass, the same operation of the two wipers.

Afraid of smashing the glass can pad a towel, I am looking for a carton pad, the next installation, it is simpler, the new wiper placed in the card slot position press down until, the positioning block is installed in place. Then gently put it down.

1. First of all, follow the direction of the wiper and naturally lift the wiper arm upwards to keep it away from the body, 2. Then pull the buckle to the side to untie it from the wiper blade connection, and then replace the wiper strip after the wiper blade and wiper arm are separated.

The installation of the car wiper is very particular, if there are some details that are not noticed, then it will affect the cleaning effect of the car wiper blade, will make the front windshield look more confused, thus affecting our driving safety, so the installation of the wiper blade is very important. The specific steps are as follows:

1. Remove the wipers. This step is relatively simple, pull up the wiper spring arm rod to make the wiper stand up, you will find a square opening in the middle, press the plastic block inside, and at the same time the other hand goes up, you can pull out the wiper. At this time, remember to put the wiper spring arm back into the windshield slowly and carefully immediately, so as not to accidentally touch the spring and bounce back to smash the windshield.

2. Disassemble the wiper strip. Removed wipers with a plastic cap at each end. Use a slight force to pry open the fixed cap with a screwdriver, and do not rush to pull out the strip at this time.

Because there is also a metal buckle, which plays the role of clamping and fixing the adhesive strip, use a screwdriver to gently pry it open a little, and the adhesive strip can be pulled out smoothly.

3. Replace the rubber strip. If you buy a new rubber strip online, the rubber strip has 2 and a half layers from the inside to the outside, and the innermost 1 layer is stuck in the groove of the wiper, put it in, clamp the metal buckle to fix it, and cover it with a plastic cap, just like the original factory.