How do you put away the Audi Q5 rearview mirror?

There is a button with the rearview mirror logo on the main driver's door panel, which can be folded with the lock car when opened.

How to put away the Audi Q5 rearview mirror: the position on the cab door has a rearview mirror, ** can be collected. Hope.

Adjust the exterior mirrors.

Turn the rotation button to the appropriate position:

Fold the exterior mirrors. When you want the mirror, turn the knob to another position. In the infotainment system, the automatic folding function of the rearview mirror can be turned on and off when the car is locked.

If you can fold the option in the large screen of the car, after entering the vehicle settings, check the reflector (rearview mirror) to set it successfully. Benefits of mirror (rearview mirror) folding: Mirror automatic folding means that the mirrors on both sides of the car can be folded and retracted if necessary.

The vehicle will inevitably have some accidents in the process of driving, the rearview mirror as the widest part installed on the vehicle, in the case of causing friction, the most susceptible to impact, in order to avoid scratches to the greatest extent, it is necessary for the rearview mirror to have a folding function.

Rearview mirror precautions.

Adjust the driver's seat to a suitable position for you, and then adjust the position of the mirrors. If you are in the mirror, you can see that the proportion of the body in the mirror does not exceed 1 4 in the mirrorThe distant horizon is in the middle line of the mirror, and the road surface accounts for half of the proportion in the rearview mirror.

The entire rear window is located in the mirror, and the horizon in the distance is right in the middle of the mirror, and if all this is done, then this is the most suitable position for the mirror. Observe the road conditions behind Driving in the country, you need to change lanes frequently. When you are ready to change lanes, turn on your turn signal in advance, and then look at the vehicle behind you through the rearview mirror to confirm that it is safe to change lanes.

Answer: Hello dear! Audi Q5 sets the rearview mirror to automatically fold as follows: 1. Click the one-button start button of the vehicle to start the vehicle engine; 2. Find the control unit of the vehicle rearview mirror in the cab; 3. The knob of the rearview mirror can be rotated left and right to achieve different functions; 4. Rotate the button above to turn on the automatic folding function of the rearview mirror.

In order to achieve better driving performance, the Audi Q5 is equipped with a drive force distribution system that distributes 40 percent of the drive force to the front axle and 60 percent to the rear axle, and uses a Quattro gearbox, a 6-speed manual gearbox and a Stronic 7-speed dual-clutch transmission, the drive force is distributed through a self-locking** differential, and the torque is transmitted through the drive shaft to the front axle differential and through the propeller shaft to the rear axle gearbox. You are welcome to consult me again.

If you can fold the option in the large screen of the car, after entering the vehicle settings, check the rearview mirror and set it successfully.

The electric folding of the rearview mirror completes the folding function through the motor in the mirror, which is operated by the button in the car, and the button position is different depending on the car. The driver only needs to operate the button to realize the electric folding of the rearview mirror, and the long-term folding will not cause damage to the rearview mirror itself.

Precautions for driving in the car.

When parking, starting, overtaking, turning, turning and other driving routes are about to change, the corresponding driving signals are given first, and at the same time, we must pay attention to the rearview mirror, timely understand the traffic conditions on both sides and the rear, and prevent being caught off guard when there is a sudden situation.

Before driving, adjust the position and angle of the 70-mile smart rearview mirror. In driving, due to the driving vibration of the vehicle, it is easy to cause the position and angle of the rearview mirror to change, which should be observed and adjusted in time.

There is a button!! Look at the switch.

You need to start the Audi Q5 engine and turn on the electric Hu Xiaoyuan of the Audi Q5 whole car, and the specific operation steps are as follows:

1. Open the door on this side of the Audi Q5 cab.

Second, press the brake pedal of the Audi Q5 to prepare to start the engine.

3. Twist the key of the Audi Q5 to start the engine and run idle.

Fourth, the instrument of Audi Q5 lights up, which proves that the whole car has been connected to the power supply.

5. Press the buttons on the door of the Audi Q5 driver to retract the mirrors on both sides.

1. First click the one-button start button of the vehicle to start the vehicle engine, otherwise the rearview mirror cannot be adjusted empty.

2. After that, on the left side of the cockpit of the vehicle, you can find the reversing mirror operation button of the vehicle at the position shown in the figure.

3. The picture shows the operation knob of the reversing mirror, which can be rotated to achieve different posture shooting functions.

4. Turn the knob and rush the protrusion of the knob to the illustrated button, and the rearside mirror will automatically fold up.

5. You can see that the rearview mirror of the vehicle is automatically folded.

To disassemble the Audi Q5 reversing mirror lens, you only need to prepare a flathead screwdriver, and Tang Jingbi will introduce the specific removal steps in detail:

1. First adjust the rearview mirror lens of the Audi Q5 car to the limit position with a manuscript branch, and then use the prepared screwdriver to insert the lens into the clamping position of the lens and the driver.

2. Then pry the slotted screwdriver slightly, you can separate the lenses of Audi Q5 from the driver, here you should be careful not to use too much force, to avoid breaking the lenses, 3, Audi Q5 car rearview mirror lenses are electrically heated, at this time, you also need to pull out the Audi Q5 rearview mirror plus ** bundle head.

4. Finally, the Audi Q5 reversing mirror lens lens was removed.

Summary. Hello <>

The method of adjusting the Audi Q5 interior mirror is as follows: open the door on the side of the Audi Q5 cab, press the brake pedal of the Audi Q5, which is used to prepare to start the engine, press the Audi Q5 one-button start button, start the engine, run idle, the instrument of the Audi Q5 lights up, the whole car has been turned on by power, up and down and dial the button of the Audi Q5 steering wheel left side combination switch to adjust the rearview mirror in the car, adjust the rearview mirror in the car to the appropriate angle, and stop the toggle button. <>

How to adjust the interior mirrors of the Audi Q5.

Hello <>

The method of adjusting the Audi Q5 interior mirror is as follows: open the door of the Audi Q5 cab, press the brake pedal of the Audi Q5, which is used to prepare to start the engine, press the Audi Q5 one-button start button, start the engine, run idle, Audi Q5 instrument lights up, the whole car has been turned on by power, up and down Xinhu send back and forth to adjust the button of the rear slide mirror in the car in the combination switch on the left side of the Audi Q5 steering wheel, and adjust the rearview mirror in the car to the appropriate angle, Just stop toggle the button. <>

Audi takes the golden mean, and has a strong sense of science and technology. Fight it to drive a BMW, ride a Mercedes-Benz, and taste the Audi air sensitive bend. Audi did not take and highlight the advantages.

Its comfort and luxury xing are not as good as Mercedes, and the handling xing is not as good as BMW. Audi's Xing can be somewhere between Mercedes and BMW. The price of the Audi Xing is higher than that of the Zui, and the discount margin is large.

You need to start the Audi Q5 engine and turn on the power supply of the whole Audi Q5 car, the specific operation steps are as follows:

1. Open the door on this side of the Audi Q5 cab.

2. Press the brake pedal of the Audi Q5 to prepare to start the engine.

3. Twist the key of the Audi Q5 to start the engine and run idle.

Fourth, the instrument of Audi Q5 lights up, which proves that the whole car has been connected to the power supply.

5. Press the buttons on the door of the Audi Q5 driver to retract the mirrors on both sides.

Just do have a mirror switch on the front door and screw it to the closed position.

Pacific Automobile Network] Hang R gear, rearview mirror knob select the right rearview mirror, adjust to the angle you want, and then hang R gear, if the knob in the right rearview mirror position will automatically turn down.

The rearview mirror reflects the situation behind, sideways and below the car, allowing the driver to see these positions indirectly, and it acts as a "second eye" to expand the driver's field of vision.

The exterior mirrors reflect the rear side of the car, the lower mirrors reflect the front and bottom of the car, and the interior mirrors reflect the rear and interior of the car. The mirror structure will be different if you use Fenghuitu. There are two main kinds of general rearview mirror mirrors, one is a plane mirror, as the name suggests, the mirror surface is flat, and the glossary Yinchang answers that it is "the surface curvature radius r infinity", which is the same as the general family mirror, and the image can be obtained with the same visual size, and this plane mirror is often used as an inner rearview mirror.

The other is a convex mirror, the mirror is spherical, with a radius of curvature of different sizes, its image is smaller than that of the eye, but the field of view is large, like the role of the camera's "wide-angle lens", this convex mirror is often used as an exterior mirror and a lower rearview mirror. (Photo by Cao Bo of Pacific Automobile Network).