How do I turn on the flash on the Honor Plus 4 T Pro?

Hello friend. The incoming call flash function can be adjusted to silent state in the mobile phone, prompt in time, if there is no flash prompt, then it is likely to miss a lot**, for everyone to set up the call flash.

How to set up the flash for incoming calls on an Honor phone.

**After installing the call flash software, after installation, remember to let it stay in the background in the mobile phone manager, add the memory acceleration whitelist, and then open it to find that there are call flash, flash frequency, flash times, personalized calls and other operations.

Go to the Call Flash option to turn on the Call Flash, and you can adjust other options to your liking.

This function will only flash when the screen is locked and the screen is closed, and if the screen is unlocked, the incoming call will not flash and glow. If it is not possible when the screen is locked and closed, it is recommended to turn on this function and restart the device.

insc m="3" i="28980"}

Good luck.

1. Open AppGallery on your BAI phone.

Explanation: Incoming call flashing will increase power consumption, resulting in a short standby time of the phone.

1. Open AppGallery on your phone.

Explanation: Incoming call flashing will increase power consumption, resulting in a short standby time of the phone.

4. Click the "On" icon option, and then click "OK".

How to set up the incoming call flash on your phone, it turns out that it's so simple, try it after reading it.

Whether it is taking pictures or videos, there is a small charged icon in the upper left corner, which is turned on. The photo flash is on.

How to turn on the flash function on the phone:

1.Go to the camera - tap the menu key - Settings - tap the gear icon - flash - select OFF (or Auto).

2.Some early models: Go to the camera screen - look for the lightning bolt icon on the left side of the screen - select On Off (or Auto).

Note: Some phones don't support the flash feature. It's a good idea to check if there's a flash near your phone's rear camera first.

1) First open "Settings" on your phone, and then tap "Devices" in "Settings".

2) In "Devices", click on "Accessibility", and then type "" on the right side of "Flashing Notifications" to successfully turn on the function of incoming call flash.

Teach you how to set up incoming call flash on your Huawei phone!

Teach you to turn on the hidden function of the flash on Huawei mobile phone, the flash of incoming calls is very cool, don't lose too much.

My Huawei phone calls flashing light.

Is the phone flash on?

1. Take Huawei Honor V8 as an example, if you are taking a photo with the flash on, turn on the camera, click the flash off icon, and you can switch between various flash states.

2. Automatic: When the camera takes a photo or video, it will automatically choose to turn the flash on or off according to the brightness of the environment.

3. Off: Turn off the flash, and don't turn on the flash when taking photos and videos.

4. On: Turn on the flash mode, which will turn on when taking photos.

5. Always-on: In always-on mode, the flash will always be on.

6. If you need a flashlight, you can select the flashlight function in the drop-down menu bar of the screen, and the flash will always be on.

First turn on the camera, there is a flash icon in the upper left corner of the camera, you can control the different states of the flash by tapping this symbol.

1. The A sign next to the lightning represents the flash auto mode, and the camera will automatically turn the flash on or off according to the ambient light intensity; The flash will be automatically turned on when taking photos in low-lit places, for example, at night.

2. There is a slash sign in the lightning, which means that the flash is turned off, and the flash is not turned on for taking photos and videos.

3. The lightning sign means that the flash is turned on, and the flash will be turned on when taking pictures, and it will not flash when not taking pictures.

4. The sign of a light bulb means that the flashing off light is always on, and it is always on.

Flash function:

It is a photographic accessory that emits strong light in a short period of time and is photosensitive for photography. It is mostly used for instantaneous illumination in low-light occasions, and is also used to fill in the light of the subject in brighter occasions.

It is a kind of fill light device, it can ensure that the picture is clear and bright in dim conditions, and when shooting outdoors, the flash can also be used as an auxiliary light source to emphasize the tone of **. Special effects can also be arranged according to the photographer's requirements.

1.Open Settings on your Huawei phone and go to the settings page. This is shown in the figure below.

3.Click the indicator to enter the indicator settings page, as shown in the following figure.

4.Turn the start switch on at the back. Depending on the flashing light settings you want to set.

5.Turn on the required flash and you're good to go. This is shown in the figure below.

If you turn on the camera, you can't turn on the flash by clicking the lightning bolt icon directly, but if you want to click the IA, you need to switch to AI photo mode, and then tap the lightning bolt icon to turn on the flash.

If you take a flash, there is usually a lightning-like button on the photo interface, just at the top of the screen, and you can switch the flash mode with one click.

If it's a flashlight, I usually don't know that I can't find it in **, and you can directly enter the mobile phone voice assistant. and turn on.

Are you talking about turning on the flash when taking a photo, or turning on the flashlight?

The flash at the top of the photo mode is turned to auto or the flash is turned on... That is, to switch to flash A, or only the flash logo.

1. Find the system settings in your phone and click on it.

2. After going to the phone system settings, scroll down to find the Notifications and Status Bar options.

3. After completing the previous step, you can see that the Receive Notification indicator flashing option is turned off.

4. Turn on the Receive notification indicator flashing option, when the app sends a notification, the mobile phone's indicator light will flash.

5. You can set which apps can send notifications to avoid interference, and click Notification Management.

6. Select the app you want to view, and turn on Allow notifications to send notifications.

The steps are as follows:

1. Open AppGallery on your phone.

Explanation: Incoming call flashing will increase power consumption, resulting in a short standby time of the phone.

Teach you how to set up incoming call flash on your Huawei phone!

2. After installation, remember to let it stay in the background in the mobile phone manager, and add it to the memory acceleration whitelist3. In the [Mobile Manager] permission settings, open the permissions for this software, especially to open **, camera, and SMS.

4. In the task interface, lock the background of this software.

5. After the setting, after the ** comes, you will find that your mobile phone also has a cool call flash.

How to set up Huawei's incoming call flash, the incoming call flash is very cool and practical.

How should I set up the incoming call flash on my Huawei phone?

Step 1: Tap Settings.

Step 2: Click on Display.

Step 3: Turn the indicator on or off.

The incoming call flash can only be turned on by the geek version of the Honor series.

The steps are as follows:

1. Open AppGallery on your phone.

Explanation: Incoming call flashing will increase power consumption, resulting in a short standby time of the phone.

Huawei Honor Play 4X has a flash function, but it is the camera's photo flash, not the phone's incoming call flash function, so it can't be set.

Huawei Honor Play 4 version information introduction:

HUAWEI Honor Play 4X (CHE1-CL20 Full Netcom);

HUAWEI Honor Play 4X (CHE-TL00 Mobile 4G);

HUAWEI Honor Play 4X (CHE-TL00H High Edition Mobile 4G);

HUAWEI Honor Play 4X (CHE1-CL10 Telecom 4G);

HUAWEI Honor Play 4X (CHE2-UL00 High Edition Unicom 4G);

Huawei Honor Play 4X (CHE2-UL00 Unicom 4G).

Flash or indicator light No.

1. Tools that need to be prepared.

Take the Huawei P20 phone as an example.

2. Steps.

1. To get started, first open the app "Incoming Call Flash" on the desktop of your phone to enter a new interface.

2. Then, after entering the incoming flash operation interface, find the "Function" option at the bottom and click to open it.

3. After entering the function operation interface, find the "Call Flash" option and click to open.

4. Click the "On" icon option, and then click "OK".

Material Tool: Huawei 5X

1. First of all, open the application software market on the interface of your Huawei phone.

Teach you how to set up incoming call flash on your Huawei phone!

The steps are as follows:

1. Open AppGallery on your phone.

Explanation: Incoming call flashing will increase power consumption, resulting in a short standby time of the phone.

If there is an update that will be posted through the official pollen forum, it is recommended to keep an eye out for the latest developments.

How should I set up the incoming call flash on my Huawei phone?