How to reset the Xiaomi sliding door lock password

Hello friend. In 2018, Xiaomi finally launched the first smart line of defense for the family - Mi Home Smart Door Lock, the smart door lock can support a variety of unlocking methods, which is very popular with users, so how to change the password of the Xiaomi smart door lock?

How to change the password of Xiaomi smart door lock?

2. Secure password through digital, fingerprint or face verification.

3. Select the user who needs to change the password.

4. You can set a new password after deleting the user, or you can add a new password directly.

Note: Xiaomi smart door lock supports setting 6-10 digit unlocking passwords, and supports 20 as virtual passwords, and also has fingerprint recognition, temporary passwords, Xiaomi mobile phone NFC, mobile phone Bluetooth and emergency key These five unlocking methods.

Good luck.

Step 1: First go to the indoor panel of the fingerprint lock, then find the opening gap of the lid at the bottom of the fingerprint lock, open the lid below, and then slowly remove the entire back cover, because the back cover of this lock is an integrated design, so take it off slowly, otherwise it may break.

Step 2: Locate the reset hole at the top of the fingerprint lock battery slot – a small black hole on the far right.

Step 3: Insert the reset hole with a toothpick or sharp object, and press and hold the initial button for about 5 seconds to restore the fingerprint lock to factory settings.

Hello, glad for your question.

First of all, open the rear cover plate of the door lock, find the reset hole or reset button near the battery**, the reset button directly and manually press and hold for about 5s, and the reset hole needs to be pressed and held for about 5s with a card needle or other sharp object, and then after verifying the identity of the administrator according to the prompts, the door lock can be reset.

Hope mine can help you

The steps to unbind the Mi door lock are as follows:

2. Step 2: Click "Me" in the lower right corner, enter the personal center, and click on the avatar at the top.

3. Step 3: Click "Modify" on the right side of the "Secure Mobile" number in the "Basic Information".

4. The fourth step is to use the original mobile phone number for SMS verification, and then enter the new bound mobile phone number for SMS verification.

In terms of appearance, the Xiaomi Mijia smart door lock is designed with a full-body black design, and the front is the upper password area + the lower physical hidden lock hole design.

In terms of security, Xiaomi Mijia smart door lock uses a true mortise C-level smart lock cylinder. Designed with electromagnetic interference protection. The C-class lock cylinder is also equipped with a key insertion detection sensor, which detects the insertion of foreign objects and gives a real-time alarm.

Equipped with panel anti-pry detection sensor, real-time alarm to detect violent damage; Equipped with deadbolt sensor monitoring, real-time reminder of door lock opening and closing status; The fingerprint module is bound to the door lock one by one; Anti-cat's eye unlocking; Anti-child false anti-lock function.

In terms of fingerprint recognition, Xiaomi Mijia smart door lock adopts an integrated fingerprint recognition design and a PB fingerprint recognition algorithm customized by Precise Biometrics from Sweden, with oval groove fingerprint recognition, the official fingerprint recognition rate is up to, and the sapphire fingerprint recognition area cover is used, with a Mohs hardness of 9.

In terms of intelligent linkage, through the Xiaomi Mi Home app, it can cooperate with other Xiaomi smart devices to automatically turn on the lights when you go home and pause camera monitoring; Turn on the air conditioner and air purifier; Automatically turn off the lights when you leave home, and restore smart home linkage such as monitoring.

Hello, I have seen your question and am sorting out the answer, please wait a while

How to remove the binding of Xiaomi door lock?

Step 2: Click "Me" in the lower right corner, enter the personal center, and click on the avatar at the top end. 3.Step 3: On the right side of the "Secure Phone" number in the "Basic Information", click "Modify".

4.Step 4: Use the original mobile phone number for SMS verification, and then enter the new bound mobile phone number for SMS verification. 5.

Xiaomi smart door lock.

There are still a lot of styles,The general subtle experience is really not good to compare,Unlike mobile phones, you can compare and touch,If you lock it, you can probably only look at the parameters,Let's take a look at how to rebind the Xiaomi smart door lock。

1. Open the rear cover of the door lock, find the rightmost reset hole above the battery compartment, and press and hold it with a card needle or other pointed object for more than 3 seconds to verify the identity of the administrator according to the prompts, and then you can reset the door lock.

2. Re-enter Mi's house.

This article is based on Xiaomi Smart Door Lock Pro&&&Xiaomi 11

As an example, it is applicable to the Miui version of the system.

Summary. Hello dear<>

In the "Smart Lock Settings" interface, find the "Password Management" option. 4.Click on "Password Management" and select "Add Password".

5.Enter a new password, which must be at least 6 characters long and can be a combination of numbers or letters. 6.

After entering the new password, click "OK" to save the new password. 7.If you want to delete an existing password, you can select the password you want to delete in "Password Management" and click "Delete".

How to change the password of Xiaomi smart lock.

How to change the password of Xiaomi smart password lock.

Hello dear<>

In the "Smart Lock Settings" interface, find the "Password Management" option. 4.Click on "Password Management" and select "Add Password".

5.Enter a new password, which must be at least 6 characters long and can be a combination of numbers or letters. 6.

After entering the new password, click "OK" to save the new password. 7.If you want to delete an existing password, you can select the password you want to delete in "Password Management" and click "Delete".

Is it okay if you didn't get it yourself?

You don't need face recognition or anything, do you?

No, you don't. Not if it's me.

Because we bought a second-hand house, the landlord knew that the password would not be changed.

Change the locks. Because a smart lock can only be bound to a person's good number, you can't change it if someone binds it. Only the locks can be changed.

Oh, that means it's not safe even if you change it, right?

Yes. It is safer to change the lock.

Mi Door Lock can directly add residents to reset the old password by setting a new password, and the setting method is as follows:

2. After entering the security code, wait for the Bluetooth connection of the phone to the door lock.

3. Click "User Management".

4. Click " " in the lower right corner

5. Click "Normal User" (if you want to add an administrator, click "Administrator").

6. After entering the new user page, you can add fingerprint and password here, here is to add password as an example. Click on the " " to the right of the password

7. Enter the 6-10 digit unlocking password, click "Continue", enter the password again, and click "Finish".

8. Click "Done" at the bottom of the page.

About this Xiaomi's door lock,If you forgot how to reset this, you can go and see the manual,There are instructions inside,It's very simple。

You can tell you the password, and I personally think this password works very well.

If you want to reset the password of the Xiaomi door lock, you need to reset it in the settings.

The password at the door of Xiaomi can be asked through the official customer service.