Job responsibilities of concrete batching plant, what is the work content of commercial concrete bat

Concrete batching plant job responsibilities:

1. During the installation process, it is strictly forbidden to tilt the silo body and deform the legs.

2. The bottom of the outrigger is firmly welded with the foundation embedded parts.

3. Do a good job of wind protection and lightning protection.

4. It is strictly forbidden to strongly impact the outriggers and the warehouse.

5. Regularly check the cement adhesion of the dust collector bag and clean it up in time.

6. The foundation must be firm and conform to the architectural design code.

7. Once the bag is blocked, the pressure in the warehouse exceeds the safety pressure of the top pressure safety valve, and the pressure safety valve can be opened to release the pressure in the warehouse to prevent the occurrence of the warehouse explosion.

8. When the cement silo is working, it must be erected by a special crane, and then put on the precast concrete foundation, and check the perpendicularity between the cement silo and the horizontal plane after it is erected, and then weld the bottom firmly with the foundation embedded parts.

The material of the concreter.

It is mainly engaged in the delivery of materials, mixing and transportation of concrete, pouring of concrete, curing and repair of defects of concrete, quality control and acceptance of concrete, and safety production of concrete.

Vocational ability is characterized by certain learning ability, strong spatial sense and calculation ability, accurate observation and analysis ability, and flexible fingers and arms.

The above content refers to Encyclopedia - Concrete Batching Plant.

You can go to China Concrete to see the job information posted by the batching plant, and the job responsibilities will generally be listed.

The daily work of a concrete batching plant is the process of production, distribution, construction and maintenance. The departments involved in each process are raw materials, mixing table, dispatching table, and on-site technical services.

Implement the current national standards, norms and relevant documents of the superiors, and be responsible for collecting and implementing relevant new technologies and standards. Fully responsible for the production technology of the laboratory and mixing plant. Responsible for establishing and improving the laboratory management system, and assessing the professional ethics and responsibility system of all laboratory employees.

Monitor and measure the concrete production process of the station, and inspect the use of the concrete mix ratio, and adjust the mix ratio accordingly according to the inspection results if necessary. Monitor the construction performance of the concrete mixture to meet the user's construction requirements.

To put it simply, the work content of the mixing plant is the process of production, distribution, construction and maintenance. The departments involved in each process are raw materials, mixing table, dispatching table, and on-site technical services. I think there are two most important departments in a mature mixing plant

Laboratory and dispatching room, the laboratory ensures the quality of concrete products, and the dispatching room ensures the smooth distribution of concrete during the construction process. The other departments are in the service of both.

Either the operator, responsible for the feeding, or the laboratory specialist, the experimental concrete formulation, or the station manager, who manages the operation of the entire batching plant, or the mixer truck driver, or the handyman.

It is estimated that you can put the material according to the proportion and then start the mixer, or you can manage the accounting such as calculating costs and account records, and see what part of the work you do.

1) The main work of the production department is to organize the production and transportation of the whole process from the procurement of raw materials to the use of products on the site, so as to ensure the normal use and operation of the production equipment of the mixing plant.

2) The sales department, this is mainly for the production line of the commercial concrete mixing plant, most of the engineering mixing plant production line is for their own projects to produce concrete, and there is no need for external concrete. For the production line of the Great Wall Construction Machinery Commercial Concrete Mixing Plant, the sales department is one of the important departments, and its work content is not quite the same as that of ordinary salesmen, first of all, it is necessary to understand the market and competition of concrete around the mixing plant, and then to carry out various marketing work to complete the designated sales tasks.

3) The main work of the financial department is daily financial accounting and account processing, with cash **, to ensure the normal financial expenditure of the mixing plant production line; The other is to put forward plans to strengthen financial management, relevant financial measures and reasonable proposals.

4) The quality control department, whose work content collectively includes: 1. Formulate scientific concrete formulas according to customer needs; 2. Monitor raw materials; 3. The monitoring room is produced according to the quality requirements; 4. Monitor the quality of products to ensure that customers are provided with high-quality products;

5) The administrative department, whose work content is 1, responsible for external relations and external work; 2. Otherwise, the situation will be issued and the department will be coordinated to communicate; 3. Manage logistics services and security work; 4. Manage employee personnel files and organize the implementation of human resources work.

1. Responsible for the quality inspection of all the company's materials and products (including incoming semi-finished products) equipment; The right to order the prohibition of nonconforming products and propose treatment measures;

2. Responsible for the generation, sorting and archiving of quality inspection records;

3. Responsible for tracing the causes of defective products and taking corrective and preventive measures;

4. Responsible for the quality inspection of products before warehousing and the quality inspection of products before leaving the factory;

5. Responsible for verifying and implementing inspection specifications and system formulation such as incoming materials and final inspection;

6. Assist in the company's ISO9000 quality management standards;

7. Be fully responsible for the work undertaken

8. Participate in the investigation and analysis of product quality accidents, and track the implementation of corrective measures;

9. Inspection, storage and maintenance of measuring instruments;

10. Archiving and archiving of quality inspection documents;

11. If major problems are found in the process of quality inspection and supervision, report to the superior in a timely manner, and assist the superior to complete other quality management system work;

1. Abide by the company's rules and regulations, adhere to the principle of "quality first" in work, be selfless, dare to point out people and things that violate the process, and be ruthless;

2. Be fair and honest, do not deceive, and do a good job of various inspection records in a realistic manner;

3. Implement the work in strict accordance with the inspection process, so that the four inspection processes (incoming materials, semi-finished products, finished products, and ex-factory) are carried out in strict accordance with the inspection standards and specifications, and the inspection records are made;

4. Strictly control the entry of nonconforming products into the production line, prevent nonconforming products from entering the next process, and save the inspection records, and strictly prohibit the tolerance of errors and omissions;

5. Be familiar with the production process procedures and quality control requirements, strictly supervise the production operations of each post to operate according to the process requirements, and stop illegal operations in time to ensure product quality;

6. Study hard, study hard, and constantly improve your business quality, technical level and work ability.

7. Warm service, respect for customers, patiently answer and deal with the problems raised by customers, and take the initiative to communicate with customers;

8. When there is a problem involving product quality, it should be reported to the company in time, and it is strictly forbidden to conceal or deceive the company.

1. Responsible for supervising the supplier to provide the "Ex-factory Product Quality Inspection Report" of the relevant raw material procurement batch;

2. Familiar with the quality standards and inspection procedures of various raw and auxiliary materials, and be able to conduct inspections skillfully and strictly in accordance with the inspection requirements and regulations;

3. Carry out project inspection in strict accordance with the company's "Quality Standards for Raw and Auxiliary Materials" and inspection procedures, supervise and urge the warehouse keeper to do a good job of inspection status identification after passing the inspection, and conscientiously do a good job in the quality record of "Raw Material Inspection Report";

4. The unqualified raw materials must be issued with the "Unqualified Inspection Report", submitted to the Minister of Quality Inspection for approval, and the corresponding nonconforming products must be treated;

5. Maintain and properly keep the measuring tools and measuring equipment in use, calibrate them before use, ensure their accuracy, and adjust or send them for repair in time if deviations are found;

6. Be directly responsible for the losses caused by personal misdetection, omission and misjudgment;

7. Be directly responsible for the losses caused by not filling in the inspection records or the records are not true;

8. In the process of inspection, it is strictly forbidden to adopt the attitude of "accommodation" and "understanding" and relax the inspection. If the inspection and acceptance are not serious or the problems found in the inspection and acceptance are not corrected in time, once found, a heavy penalty will be imposed.

At present, due to the low threshold of the concrete industry and the fact that the market management has not yet been standardized, many unqualified and chaotic concrete enterprises are competing in disorderly or maliciously lowering prices, resulting in the first step of concrete all the way down, so the cost of concrete has begun to become one of the important factors in the competition between mixing plants. The cost directly affects the formulation of concrete products and is related to the profitability of the mixing plant.

Good and effective technical quality management can continuously reduce costs and increase efficiency through corresponding cost reduction and efficiency improvement measures such as mix ratio optimization, new materials, and new technologies, so as to gain more markets and form an effective competitive advantage by virtue of its best advantages. Therefore, effective technical quality management is a favorable guarantee for the mixing plant to win in the competition.

1. Responsible for the implementation of relevant laws and regulations, standards, and quality management regulations of the company and superiors.

2. Responsible for the quality plan of the project, formulate measures, and organize the implementation to achieve the quality objectives.

3. Assist technicians to determine the quality standards in the technical disclosure, put forward suggestions for improving common quality problems, and achieve the quality objectives of sub-projects, sub-divisions and unit projects.

4. Responsible for the quality supervision of the on-site project, inspect and accept the construction process, find and put forward quality problems in a timely manner, and be responsible for recording and rectifying.

5. Organize the assessment of sub-projects and sub-projects, fill in the quality assessment of sub-projects and sub-projects, approve the quality level of sub-projects and sub-projects, verify the quality of raw materials, implement the right of veto on quality, and solve disputes over material quality and process quality.

6. Receive the quality inspection of the project by the relevant departments, listen to the quality work report, propose and supervise the quality improvement measures and review the results.

7. Assist technicians to carry out technical research, eliminate common quality problems, and improve the quality of projects.

8. Responsible for the quality education of employees and improve quality awareness.

The quality of concrete is related to the structural safety of construction projects, and the safety of the lives and property of the masses of people is closely linked, the potential crisis and risk in the production process of the mixing plant, once it occurs, will not only bring a huge negative impact on the enterprise itself, but also cause irreparable losses to the society, the consequences are unimaginable.

Technical quality management is a strong guarantee for the quality of concrete products and a decisive factor for the good operation of the batching plant. Concrete is a commodity, the commodity is facing the market, once the commodity enters the market, it faces competition, there are many factors that affect the market competitiveness of enterprises, but the quality of commodities is the core that determines the competitiveness of enterprises. Effective technical quality management can ensure that concrete products are effectively controlled in all aspects of the realization and fully guarantee the quality of concrete.

The direct supervisor of the quality inspector is responsible for the head of the quality inspection section; He is responsible for the quality inspection of materials, products and equipment; The work goal of the quality inspector is to be responsible for the quality inspection of all materials, products and equipment of the company. Quality inspectors need training and certification, need to pass the quality inspector qualification examination, and carry the quality inspector qualification certificate to work.

Engaged in different positions, quality inspectors have different work arrangements.

1. The main job responsibilities of the quality inspector of the mixing plant are as follows:

1. Familiar with the technical conditions, quality standards and safety operation procedures of high-performance concrete, and supervise the implementation of the situation;

2. Prepare various quality assurance plans, supervise and inspect the implementation plans of relevant departments, and coordinate the quality management of relevant departments;

3. Responsible for the quality inspection and monitoring of incoming raw materials;

4. Responsible for the quality control of concrete safety production in the mixing plant;

5. Responsible for checking the safety inspection of the special personnel in the mixing plant who are certified to work;

6. Responsible for inspecting the implementation of the environment, occupational health and safety, and environmental protection in the construction process;

7. Responsible for the work contact with the superior safety department, and convey and implement the methods, systems, documents and requirements related to safety production;

8. Responsible for the appearance quality of the transported concrete, and inspect the strength, air content and slump control;

9. Collect and sort out relevant quality information, grasp the quality dynamics, and conduct quality analysis and evaluation;

10. Responsible for on-site self-inspection and cooperate with the supervision engineer to do a good job of quality inspection. Carry out process control and intermediate inspection, strict completion inspection, and give full play to the role of self-inspection, mutual inspection and special inspection;

11. Check the efficiency and effectiveness of the quality management system, and put forward suggestions for improvement in a timely manner. Responsible for the inspection and evaluation of project quality, participate in the formulation and implementation of the disposal plan of unqualified products and their corrective and preventive measures, and compile quality records;

12. Responsible for carrying out training, publicity and consulting activities for quality management personnel.

2. The job requirements of the quality inspector of the mixing plant are as follows:

1. More than 2 years of work experience as a quality inspector of concrete batching plant, and those with building materials inspector certificate are preferred;

2. College degree or above in silicate, industrial and civil construction, construction, materials engineering or related majors;

3. Strong sense of responsibility and certain ability to analyze and solve;

4. Strong organization and coordination skills;

5. Have a good team spirit.

The incoming and outgoing inspection of various raw materials is qualified (sand, stone, cement, mineral powder, fly ash, admixtures). The most important tests for concrete appearance include, cohesiveness, water retention, fluidity, i.e. workability.