Is the apron responsible for laying the floor glue in the table tennis room?

In this case, you can consult with him, and then both parties can communicate.

If you are an activity room or a kick-off hall in the unit, it is recommended to spread it, after paving, it feels completely different, but you can't wear leather shoes to enter the venue, otherwise it will leave a black mark, which is ugly. If it's your own home, forget it, there's no point, the concrete floor is the same, it's better to use money to upgrade equipment.

It's really not bad for money, it's okay to pave it, but pay attention to ventilation, it is said that it is stuffy in it for a long time, which is not good for the body, hehe.

If you want to pave, you can pave, and if you don't want to, you can not pave.

Pay attention to the seams when laying the floor glue, which needs to be welded, which is the kind of long scraps;

Secondly, it is also necessary to pay attention to the bottom plate to be flat;

It should also be noted that the floor glue should be pasted when laying, which is not easy to wrinkle;

The last thing is to cut, cut neatly, and cut to the end.

Remember.

Super glue can be applied to the floor.

First use sandpaper to polish the back of the original ground and the rubber floor, and then brush the super glue, brush the two contact surfaces of the ground and the rubber floor, and when the super glue is half dry, cover the rubber floor, and then call the rubber hammer to shoot it down, and you can do it.

The special connecting belt between the floor glue and the floor glue is bonded into one (or not connected) with the special connecting belt that the manufacturer matches, and the floor glue is not bonded to the ground to facilitate future movement. It can be paved on flat cement floor, marble tile, terrazzo, epoxy floor, wood floor and other ground, and the surface interface can be welded with special PVC welding rod to achieve seamless smoothness.

Fixed Installation:

Local bonding: On the ground, the edge line of the floor glue is used as the benchmark to bond inward with the special connecting belt matched by the manufacturer.

Full glue bonding: On the ground under the ground glue, the gluing joints of the two places are all bonded with the special connecting belt supporting by the manufacturer and the ground.

Specific paving methods:

The paved floor must be flat and clean.

Arrange the glue in order, align and merge, and pay attention to the overall effect of the site during the paving process.

Open the adjacent two pieces of floor glue along the joint, put the manufacturer's special connecting belt on the lower side of the joint, first glue one of the pieces of floor glue to half of the connecting belt, and then glue the other piece of floor glue to the remaining connecting belt, and close the gap closely.

After the hot melt glue is applied, it can be heated with a hair dryer and bonded.

Get a professional and fix it automatically.

Oh estimated that the couple sent VUCV according to VFHCF

1.It may be that the shop is unprofessional in the late drumming.

2.It may be caused by the thermal expansion and contraction of the floor glue.

3.Professional double-sided tape handling is required.

Tape is attached to the back, and the front is welded.

Admission Instructions.

In order to improve the quality of sports for table tennis enthusiasts, the stadium is specially laid with floor glue. The relevant matters are hereby notified as follows:

1. Please change your shoes before entering the venue.

2. Smoking and spitting are prohibited in the venue.

3. Replenish water, it is best to drink water outside the venue, in order to keep the venue dry and good sports environment, you need the support of all golfers, thank you for your understanding and support.

Absolutely. The best match for the professional floor of the table tennis hall is to lay the sports wood floor on the basic ground first, and then lay the floor glue. You can also directly lay PVC flooring on the foundation floor, and you need to pay attention to whether the foundation floor of the stadium meets the laying requirements.

PVC resilient flooring material is a good choice for all ball sports courts, including basketball, which are officially international. Only PVC sports flooring can be used to lay internationally recognized playing surfaces for badminton, table tennis, volleyball, handball, etc.

The construction of the ground needs workers to complete the operation, the process is relatively long and complex, you want to build a table tennis court can be searched, Mahayana environmental protection or water-based eau court, you can take classes (training) materials while construction.

Suzhou Mahayana environmental protection.

Suzhou Mahayana environmental protection.

Suzhou Mahayana environmental protection.

Hope it helps.

Kemp table tennis floor paving requires the cement floor to be flat, do proper waterproof treatment, the surface of the base has no hemp surface, cracks, in the process of grassroots maintenance shall not be on people, pressure, etc.

The installation method can adopt a unique double-sided seamless welding process, which makes the joints of each floor more firm, not easy to deform, and makes the site more flexible.

1. After the construction personnel enter the site, check the size of the site, calculate the quantity and size of the materials, and determine the starting position of the pavement.

3. Spread the floor rubber and lay it flat for 12 hours to restore the extrusion deformation of the floor rubber in the transportation process.

7. Pave the floor glue to the position, and make the distance between each one and the other splicing not too far or too tight.

1. After the paving is completed, the bottom of the two strips of floor glue is connected and fixed with tape.

7. Use a slotting machine to make a uniform V-shaped welding groove at the junction of the two strips of floor glue.

7. Use a hot melt welding torch to grasp the appropriate temperature and hot melt the PVC welding wire in the V-shaped welding groove.

3. After the welding wire is cooled, use a shovel blade to shovel off the welding wire that is higher than the rubber part and trim it.

5. Use a steel ruler to measure the size of the ground line of the basketball court and stick it straight with masking paper, and then evenly brush with special ink, and tear off the masking after the ink dries.

9. Remove and straighten the excess floor glue according to the design requirements.

5. Clear the remaining materials in the venue and clean it.

5.Read vertically.