How to prevent moisture in the basement when renovating? What waterproofing materials are recommende

When decorating, the decoration materials selected, such as wallpaper, vitrified tiles, etc., must be the best moisture-proof materials, and the floor, walls, and ceilings must be waterproofed. Be sure to do a good job of ventilation. A large reason why the basement is damp is that there is difficulty in ventilation.

Desiccants and moisture-proof pads can be used. In a particularly humid corner of the basement, put some desiccant, quicklime, activated carbon, etc., can play a moisture-proof effect. In fact, the waterproof performance of the coating is definitely not suitable for the best, and the best waterproof performance is the tile.

Diatom mud is not recommended for basement decoration. Diatom mud is not moisture-proof or waterproof.

It is necessary to first investigate the environment of the basement, then check the water pipes and pipes, then use some waterproof materials to coat, and finally use some waterproof equipment or use some waterproof plates, which can have a better waterproof effect, can prevent water pollution, and can also prevent the basement from being flooded. Asphalt waterproofing materials, rubber plastics, waterproofing materials, cement waterproofing materials, metal waterproofing materials, such as profiled steel plates, coated steel plates, waterproofing agents, aerated agents, and polyvinyl chloride.

First of all, we should pay attention to ventilation, when the weather is good, you can open the window to let the air convection, to achieve a certain ventilation effect, and to do a good job of waterproofing, to prevent the wall from mildew due to moisture, but also to use limestone or activated carbon and other adsorption functions to absorb impurities in the air.

1. Brush waterproof paint on the wall and ground: The basement waterproofing can follow the combination of anti-and row, and the walls and floors can be tiled to waterproof, but the waterproof coating should be brushed before tiling. The wall can also use waterproof putty to build, after leveling the construction of the surface to make rough, can better absorb, evaporate moisture, followed by a batch of scraping waterproof putty, the last surface layer is water-resistant topcoat, under multiple prevention, more to avoid the influence of moisture.

2. Install a dehumidifier: There is a noise before waterproof measures are done in the basement in time, but it is inevitable that there will be problems such as wet stains and silver, mildew, etc., at this time, you can install a dehumidifier, which is best to be movable, **damp put**.

3. Install ventilation equipment: the basement is damp many times because of insufficient ventilation, if the basement has a window posture, it can solve the ventilation problem, if there is no window, it is best to install ventilation equipment to strengthen the ventilation effect of the basement and take away the moisture.

The above is the waterproof and moisture-proof method of basement decoration that I shared with you, and those who need it can learn about it.

How to prevent moisture in the basement when renovating? What's the best way to do it? application of waterproofing sheets; When you are in the interior decoration, you need to pay attention to the waterproof problem of the basement, the desktop wallpaper and glazed bricks used in the basement of the villa will have a very good waterproof effect, and the ceiling and walls of the basement need to be waterproofed.

Pay attention to natural ventilation and waterproofing; The basement of the villa is an area with poor indoor ventilation, so under these premises, we must pay attention to the natural ventilation of the basement, and improving air convection can reduce the moisture content in the house, which is also beneficial to waterproofing.

plus dehumidifier manufacturers; In the south or in the rainy season, the temperature of outdoor gas will be very high at this time, and natural ventilation for such a long time is useless, so at this time we need to add some machinery and equipment to dehumidify the human factor. For example, add exhaust fans or air conditioners in the basement, or dehumidifiers and other facilities to achieve dehumidification in the room.

moisture-proof agent dehumidification; If the total area of the basement is not very large, then place some moisture-proof agents or small items with dehumidification effect, such as moisture-proof agents and bamboo charcoal bags can be placed in the basement, and remember to disassemble and replace them often. Look at whether there are gaps or wet and cold spots on the pavement and wall of the basement, if there is such a situation, it is best to shovel off the aging wall with mildew and clammy cold, and the total area of the shovel is slightly wider than the total area of aging, and then brush the sealing paint again.

Try not to place green plants in the basement of the villa, and you can place a dehumidifier in the basement, which has a very good effect on the basement dehumidifier with a small total area. The basement floor material is best to choose waterproof characteristics better, you can choose some well-known brands of waterproof floor tiles, so that it is reasonable to avoid the situation of dampness and cold in the basement of the villa.

The effective method of moisture-proof and mildew-proof in the basement is to suspend some moisture-proof agents, which can be packed with activated carbon bamboo charcoal, which can be sprinkled there with mothballs and activated toner powder to remove moisture, and can also be sprinkled with some moisture-proof agents on some corners and roads that are easy to get wet and cold, but be sure to replace the moisture-proof agent every once in a while. Natural ventilation is another way to prevent moisture and mildew in the basement, so the basement of the villa can be equipped with some ventilation and cooling equipment, or a few panoramic skylights can be added to achieve natural ventilation.

1. To speed up the air flow, ventilation equipment can be installed in a suitable position, and the ventilation equipment can be divided into two kinds according to the power, one is a non-powered exhaust fan, which is a more passive exhaust device, and the exhaust effect is relatively limited. It is also possible to install strong exhaust devices, such as negative pressure fans and axial fans, which may require exhaust ducts. Exhaust fans can be installed if there are windows.

2. The desiccant can be hung indoors. Hang some adsorption desiccant in the basement, the most common is the activated carbon carbon pack, you can also sprinkle some desiccant on a corner and ground that is more prone to moisture, you can break the mothballs and sprinkle the activated carbon powder there to remove moisture, but the desiccant must be replaced every other time.

It is possible to design the basement to be waterproof and moisture-proof, and the walls should also be treated with moisture-proof treatment to prevent moisture. You can put some formaldehyde removal in the basement, you can also put these green plants, reduce the use of water, put some cleaning supplies, you can also place air fresheners, you can place air purifiers.

The waterproof and moisture-proof methods of basement decoration include making a moisture-proof layer, doing ground waterproofing, setting up skylights, setting up water interception ditches, using waterproof and moisture-proof materials, and installing fresh air systems. Here's how:

1. Do moisture-proof layer: When we decorate the basement, we can do waterproof and moisture-proof by doing moisture-proof layer, ground waterproofing, etc. For example, the exterior wall of the basement can be coated with cement mortar, asphalt, etc. as a moisture-proof layer, and the interior wall can be installed with extruded plastic board to isolate moisture.

The basement floor can be waterproofed and moisture-proofed by laying waterproofing membranes or applying waterproof coatings.

2. Set up skylights: In the decoration process, we can consider setting skylights in the basement to strengthen the indoor lighting and ventilation, and reduce the humidity in the basement to a certain extent.

3. Set up a water interception ditch: You can set up a water interception ditch at the entrance of the basement to avoid the problem of rainwater entering the basement due to the low terrain of the basement.

4. Use waterproof and moisture-proof decoration materials: most of the basements are dark and damp, and when we decorate the basement, we should use waterproof and moisture-proof decoration materials for decoration, such as laying tiles on the ground, etc., which can also play a certain waterproof and moisture-proof effect. Wallpaper is also a good moisture-proof material, if you need to use wood, its wood surface should be coated with waterproof and mildew resistant paint.

5. Install fresh air system: You can install a fresh air system in the basement to strengthen the circulation of indoor air, so as to prevent water and moisture.

Basement renovation is very important to be waterproof and moisture-proof, and here are some common practices and recommendations:

Exterior wall waterproofing: Ensure that the exterior walls of the basement are effectively waterproofed. Waterproof coatings, waterproof membranes, and water retaining layers can be used to ensure that the exterior walls are not invaded by water seepage and rainwater.

Basement floor waterproofing: Laying a waterproof layer on the basement floor, materials such as waterproofing coatings, waterproofing membranes or polyurethane waterproofing coatings can be used. Ensure that the ground waterproofing layer is complete, free of loopholes, and well connected with the wall waterproofing layer.

Basement wall waterproofing: The basement wall of Shenwu also needs to be waterproofed to prevent groundwater residue from seeping. It can be treated with materials such as waterproofing coatings, waterproofing gelling agents or water retaining layers.

Drainage system: When renovating a basement, it is very important to design and install a drainage system properly. Ensuring that the drainage pipes in the basement are unobstructed can effectively remove the stagnant water in the basement.

Ventilation and dehumidification: Basement ventilation and dehumidification are also important measures to prevent moisture. Install suitable ventilation equipment, such as ventilation fans or ventilation windows, to ensure air circulation.

Additionally, consider installing dehumidification equipment, such as a dehumidifier or ventilation system, to control the humidity in the basement.

Material selection: In basement decoration, it is very important to choose materials with good moisture-proof properties. For example, you can choose moisture-proof wood flooring, waterproof tiles, etc., and wall materials can choose paints or tiles with good moisture-resistance.

Construction technology: In the construction process of basement decoration, strictly follow the waterproof construction process to ensure that each link is properly handled, such as splicing sealing, joint treatment, integrity of the waterproof layer, etc.

The basement decoration is waterproof and moisture-proof, and the following points need to be paid attention to:1Choosing the Right Waterproofing Material:

Basement waterproofing materials should choose materials with good waterproof properties, such as polyurethane, epoxy resin, acrylic, etc. 2.Construction of the waterproofing layer in the basement:

The construction of the basement waterproof limbs and layers should be carried out in strict accordance with the construction specifications to ensure the integrity and sealing of the waterproof layer. 3.Basement ventilation:

The basement should be well ventilated to reduce dampness and mold growth. 4.Basement drainage:

The basement should be equipped with a good drainage system to ensure that the water in the basement can be discharged in time. 5.Basement wall treatment:

Basement walls should be treated with moisture-proof, such as using moisture-proof paints or keeping the walls moisture-proof. 6.Basement Ground Treatment:

The basement floor should be treated with moisture-proof, such as using a moisture-proof floor or isolating the floor width and denier surface. In short, basement decoration waterproof and moisture-proof needs to consider multiple factors and take a variety of measures to achieve a good waterproof and moisture-proof effect.

How do you protect your basement from moisture? In the past, people used basements as warehouses, but people's minds began to change. If you want to transform your basement into a place for entertaining and entertaining, you definitely need a good design.

Today Tuba Rabbit comes and goes under the consideration of how to prevent dampness and basement renovation under the basement decoration.

How do you protect your basement from moisture?

First of all, deal with the basement of the basement. All walls and floors in the basement were painted three times. The material is usually based on permeable crystallization of cement. Pay attention to the thickness of the cement-based permeable crystals. It can also reach 5 mm.

Secondly, the treatment of the middle layer of the basement is the basis for cement-based penetration and crystallization. In general, it should be scraped with ordinary cement grout. In addition, attention should be paid to the surface and top surface of the cement-based permeable crystal wall. The wall scraping should be done with waterproof putty, both of which are three lives.

Third, the treatment of the basement surface, basement wall and top floor is generally painted. This paint is best used with high-quality waterproof paint. It can also be laid on the floor.

If a floor surface layer is used, then tiles are preferred. Then there are stones, do not use wooden floors, because wooden floors will not be replaced for a long time.

Basic room decoration precautions.

First, moisture-proof treatment.

The basement is not exposed to the sun, the environment is relatively humid, so when decorating the basement, be sure to choose a moisture-proof effect, before buying moisture-proof materials, it is best to check the materials of moisture-proof materials on the Internet, learn more, in order to buy high-quality moisture-proof materials.

Second, indoor lighting.

The basement is darker, the door and window design is not much, if you want to increase the brightness of the basement, it is best to buy some brighter lamps, and the reasonable use of some materials can improve the lighting effect to make the lights in the basement brighter, so that you can use the function of the basement normally.

Third, do a good job of intercepting ditches.

Why cut the ditch, just to prevent the occurrence of heavy rain, rainwater will accumulate on the road surface, will slowly seep into the basement, this time the basement is more dangerous mountains, interception ditch is to avoid this.

You can get it for free