After the car is boiled, what is the impact on the car?

1. The impact on the lubrication system, too high water temperature, indicating that the oil temperature may also be too high, and the oil may partially deteriorate, resulting in poor lubrication of the moving parts of the engine, crankshaft, bearing, connecting rod, piston, and piston pin, camshaft, valve assembly, and other core components may have surface strain.

2. The water temperature is too high, which may lead to the plastic parts and rubber parts near the engine also being subjected to high temperatures, and the aging tendency of these parts increases.

3. The coolant may deteriorate, and it is necessary to replace the normal coolant to avoid boiling again;

4. The electric fan may be damaged, or the water temperature sensor may be damaged, which needs to be repaired, or the pressure relief valve of the kettle may be broken, and the lid of the expansion kettle should be replaced.

These are all possible, not necessarily happen, a slight short period of boiling situation generally do not need to worry about the above problems.

There are many reasons for the car to boil, in addition to the hot weather, the overload of the air conditioner, the failure of the heat dissipation element and the lack of water in the water tank will make the car boil. I have compiled the relevant content, welcome to enjoy and learn from it.

What is the reason for the car tank to boil.

1. Long-term water circulation will cause the slow loss of water, resulting in a lack of water in the water tank.

2. If there is dirt in the water tank, such as mud, rainwater, etc., it is easy to rust the water tank.

3. When the temperature is too high, you can use your hand to touch the temperature of the upper water pipe and the lower pipe to judge, if the temperature difference between the two water pipes is large, it can be judged that the thermostat size cycle conversion is not working properly.

4. If there is air in the cooling system, it will form air resistance, which will make the cooling water circulate poorly, resulting in high engine temperature.

5. If the vehicle is driving on a dirt road or muddy road for a long time, there will be some dirt adhering to the radiator, which will affect the heat dissipation effect over time and cause the water temperature to be too high.

Precautions for boiling the car water tank.

In summer, it is easy to open the water tank, which means that the refrigerant in the water tank has reached the boiling point, and the boiling is very harmful, and the car hurts people, so it has also attracted widespread attention.

Driving on the hot asphalt road, suddenly glanced at the water temperature gauge near the dashboard, and found that the temperature had reached 100 degrees Celsius. Maintenance experts warn that this move is too reckless. If you keep adding antifreeze, 100 degrees Celsius is still within the normal temperature range and does not reach the boiling point, the temperature of the antifreeze is between 85 degrees Celsius and 105 degrees Celsius is considered normal, and its boiling point is 120 degrees Celsius.

If you add water, it is estimated that the pot is about to boil, but whether it is antifreeze or water, you can't open the lid of the water tank at this time, because there is water vapor in the tank at this time, and the pressure is very high.

After the car water tank water boils and answers: 1. There is cooling water in the water tank, but there is not enough water around the cylinder wall to dissipate heat, which greatly reduces the heat exchange efficiency, and it is impossible to bring the heat in the cylinder to the water tank for heat dissipation;

2. At this time, the temperature in the cylinder will rise rapidly, if the excessive heat is not dissipated in time and still continue to drive under high load, the strength of the piston, the piston ring, the tamai piston ring, the tanhui rod and other components will be reduced, and even deformed;

3. It can not bear the normal load, and at the same time, it will also destroy the normal gap between the parts, so that the normal oil film can not be maintained between the parts, which will make the engine pull the cylinder and shoe, and the whole engine will be damaged or even scrapped.

Millions of car purchase subsidies.

The car will reduce the strength of the piston, piston ring, connecting rod and other components, and even deform, and can not bear the normal load, and at the same time, it will also destroy the normal gap between the parts, so that the normal oil film can not be maintained between the parts, which will make the engine pull the cylinder, slap, and damage the entire engine or even scrapped.

The reasons for the car to boil are:

1.The pump malfunctioned, causing it to not circulate.

2.Late injection timing can cause afterburning, which can also cause high engine temperatures.

3.Whether the radiator of the water tank is clogged.

4.The thermostat is faulty and cannot be opened.

5.The fan does not rotate, whether the fan belt is too loose and caused by slippage.

6.Antifreeze is a lot less water.