-
Why don't you buy a SLI motherboard if you don't do SLI dual graphics cards?
-
It is recommended to choose Yingtai's board, not that the Panzheng board is not good, the key is that the company's Taiwan branch has closed down, if there is a problem with the board, I am afraid that it will not be easy to do after-sales.
-
1 In terms of **, Panzheng AF570+SLI is between 700-730. Yingtai's 570SLI is around 760.
2 In terms of power supply, it is a little better, but in terms of overall performance, these two boards are a little better than Yingtai. It is recommended to choose the dry Jing Yingtai. Of course, it's a little bit better than Panzheng, and it can be ignored.
3 The board is still very defeated, and the important point is to look at the after-sales service, and see which one is better to protect the money.
4 S is more than U with dual cards, it seems that the materials are slightly better, but the benefits can still be ignored. There is no gap in daily use.
-
Pansho Chao Pante AF570 SLI
This one is absolutely good.
That's all I use
-
Yingtai TF570 SLI is well made, and the performance is about the same
-
It depends on what CPU you have.
Panzheng and Yingtai have a good reputation in second-tier manufacturers, and the products are also very good, and I also use Panzheng motherboards.
These 2 motherboards** are a lot worse,If you want to talk about the value,It must be the value of Yingtai,The machine that my friend just matched,4800+,Yingtai TF570U,It's also very stable to use。
The ** of this motherboard of Panzheng can be bought from the motherboard of the first-line factory.
In contrast, it is more suitable to use Yingtai's.
-
Panzheng, my Panzheng's PC133 can still be used for more than 6 years.
-
It's very simple The current Panzheng is not the old Piwan Panzheng who did not accompany the front.
It's just a brand made by the dealers in the country.
You can see that the factory address on the box is from Shenzhen.
It's not Taiwan's, it's not as good as the original Panzheng, and the cost has dropped or something, so it's not that expensive.
-
It's hard to say about this.,In fact, in terms of workmanship and performance, Panzheng Chao Panshou AF590 SLI is higher than the latter.,It's hard to say the specific**,**This thing is a person and a report.。 js sees people talking about people, and sees ghosts talking nonsense. What exactly do you want, Zheng has to look at it himself!
-
Pansho Chao Pante AF590 SLI
Socket AM2 ATHLON 64 ATHLON 64 FX processors are supported.
The audio core is integrated with the Realtek ALC883 chip.
The NFORCE 570 Ultra's MCP55 Ultra chipset is targeted at the mainstream market, and compared to the high-end NFORCE 590SLI, the two have a high reputation for dual graphics SLIs - the NFORCE 570 Ultra does not support dual card interconnect.
Intech TF570 SLI
Supports Athlon's 64 FX X2 Sepron processors.
Support dual-channel DDR2 533 667 800 memory, up to 4GB with 1 serial port.
Integrated Realtek ALC888 audio chipset.
Although the NFORCE 570 SLI is not as good as the flagship NFORCE 590 SLI in terms of PCIe lane count and chipset capabilities, the latter's dual x16 mode rarely comes in handy for 3D performance testing and real-world gaming. Considering that the 2GB S bandwidth provided by PCI-Express X8 is sufficient to meet the needs of most 3D performance applications, the NFORCE 570 SLI motherboard with dual x8 form factor is more practical.
-
Yingtai's good point.
Yingtai's overclocking ability is definitely stronger than Panzheng ((Panzheng doesn't even have a special edition on the overclocking forum,
If you're upgrading. Just 5200. Because the 6600 and 5200 are not much different in performance. That's just a 1 second or a few nanoseconds. After all, the AGP limit problem. It is no longer possible to improve the quality and speed of the display. >>>More
In addition to CPU heat dissipation and memory problems, this phenomenon of the landlord is not the same. >>>More
Wash your hands first, pour a little white vinegar into warm water, soak your hands, about 20 minutes or so, wipe dry, apply oily skin care products, wear gloves, after a few hours, you will find that your hands are smooth and delicate, there is a great improvement, if you maintain it regularly, the effect is obvious, you might as well give it a try.
Orthognathic surgery is a piece of plastic surgery, changing the shape of the bone, suitable for the ground and the buck teeth (bony), about 1 week after the operation, the total cost is about 3-50,000 yuan; After the surgery is orthodontics, which is mainly about aligning your teeth.
Ingredients: 1 pork knuckle, 2 parsley, 5 or 6 peppers.
Seasoning: green onion, ginger, ginger powder, garlic, Sichuan pepper, white pepper, sugar, vinegar, salt, dried scallops, red pepper oil, Sichuan pepper oil. >>>More