-
Wooden locker production process 1: Preparation before construction: Before construction, the quality of the fir finger joint board should be checked. Look at whether the plate has cracking, bending, warping and other problems, and small problems can be repaired before assembly. If the quality of the plate is too poor, a change of material should be requested.
2. Although woodworking glue only plays a role in reinforcing when making storage cabinets, and the amount is not much, you should still choose panda white glue with better environmental performance. 3. Not only should the material be checked, but the wall surface of the wall cabinet should also be checked with a plumb line to check whether it is perpendicular to the ground. If the deviation of the wall is large, you need to ask the mason master to level the wall.
4. The specific process of construction uses the indoor unified elevation line, and determines the corresponding position according to the elevation of the wall cabinet and wall cabinet and the height of the upper and lower mouths required by the design and construction drawings, and the ink line pops up to represent it clearly. At this time, the fixed eye of the focus point of the cabinet and the wall is drilled with a percussion drill, which is convenient to determine the accurate position during installation. 5. According to the size of the design storage cabinet, draw the specific size with a carpentry pencil on the finger joint board, and then cut it into plates of different sizes by a cutting machine, and arrange them neatly.
When assembling the cabinet, it is necessary to simply apply white glue. In this way, the amount of glue applied will be moderate and fast. 6 In order to reinforce, the glue is applied to the junction of the plate.
Then fix it with twist nails to ensure the firmness of the cabinet. The spacing between each nail should be kept at about 150mm. The skilled workers can control the distance when operating, and we asked the master workers to measure it for us.
7. After the cabinet is roughly done, some small details should be processed with a planer to make the cabinet more flat. In general, it is necessary to confirm the feeling of the hand again. After the whole cabinet is ready, it is also necessary to repeatedly check the various sizes and angles of the cabinet.
In particular, the angle should be standard, so as to ensure that it is closely connected with the wall. After the cabinet is ready, it can be installed in the designated place. If the wall is not vertical, but not severe, fill the gaps with wood, which should be considered as leveling the wall.
Determine the holes in the wall that were drilled by percussion drilling, and then use percussion drills to punch holes in the cabinet, and then use Megu nails to penetrate them. Ordinary steel nails are not guaranteed to be strong. The spacing of the nails should also be kept at about 500mm.
If the spacing is too large, it may not be firmly fixed; If the spacing is too small, the material will be wasted. When all the Megu nails are secured, the whole wall cabinet is complete. As long as the previous operation specification, the cabinet basically does not need to be adjusted.
-
Lockers are used a lot in people's daily life, because with the continuous improvement of people's quality of life, there will be a lot of things in each home, and they are constantly increasing. Nowadays, there are multi-functional lockers in basically every home, and the use of multi-functional lockers makes the home more comfortable and warm. Here's a brief introduction to multi-purpose lockers.
A brief introduction to the multifunctional locker
With people's pursuit of quality of life and the need for personalization, more and more products tend to be multi-functional, and lockers are no exception. Compared with the traditional single cabinet, the multi-functional cabinet can be placed in different places such as kitchen, living room, and horizontal to serve as a simple cabinet, shoe cabinet, cabinet, bedside table and other storage functions.
Multi-functional locker style recommendation
Multi-purpose locker – all solid wood.
The so-called all-solid wood multi-functional locker means that there is no wood-based board, five veneers, drawer boards and back panels are high-quality solid wood, and they are corrosion-resistant and wear-resistant and about 2,000 yuan. This multi-functional cabinet is painted in an open, eco-friendly way that clearly expresses the natural oak principle of oak and perfectly preserves the texture of wood. The all-solid wood multi-functional locker has a mountain-shaped pattern like flowing water, and no two places are exactly the same, even a small color difference, all of which are carved by nature.
Multi-functional locker - green free combination.
This multifunctional cabinet can be a storage cabinet, a display case, or a partition. Open cell design, multi-compartment cabinets, free placement, capacity for more elements, all panels can be interchanged, change color at will, and easy to install. In the home environment, not only home ornaments and home accessories can play a decorative role, but also beautiful furniture can become a part of home decoration, just like multi-functional lockers.
Multi-functional lockers – freely combined.
The best thing about this locker is that it can be freely combined into various shapes depending on the size of the room. Using fir as raw material, the hardness is moderate, there are log knots, and the fir wood has good stability, physical compression, alkali resistance, durability and strong air permeability. The multi-purpose locker can be freely combined without being practical due to the structure of the room or being too small, so you can rest assured.
And this free combination of multi-functional lockers** is cheaper at about 500 yuan.
After a brief introduction of the above content, everyone should have a more detailed understanding of multi-functional lockers. In the current market, there are many kinds of multi-functional cabinets for everyone to choose, when purchasing, you should choose according to the decoration style of your room and your own preferences, through multi-functional cabinets to give the room better decoration and practicality at the same time, to a certain extent to facilitate your own life. Through multi-functional lockers, we can store a lot of things, not just one kind of things, so it has greater convenience for people's lives, I hope the above content is helpful to everyone.
The shared smart lockers in the scenic spot are paid by WeChat payment, and different types of cabinets in different places can set different charging rules, and there are detailed payment and use records, with clear statistics and convenient reconciliation. In this way, users are very clear about how long they have been using it and the details of the payment fees, so they don't have to worry about the billing error, and they can enjoy high-quality services in a transparent and affordable way. >>>More
1. Generally speaking, the reasonable area of this small function is about 1-2 square meters. The interior can usually be designed as a U-shaped, L-shaped or flat cabinet, which can effectively improve the space utilization. >>>More
The shared smart locker in the scenic spot is the use of advanced technologies such as Internet + mobile payment + Internet of Things + AI intelligence to achieve one-click automatic access to items, flexible on-time billing + per-time billing mode relying on WeChat payment, allowing users to use mobile phones to complete the storage action. Users only need a smart phone, open WeChat to scan the cabinet on *** Follow*** Click on the access function Hourly billing to open the door Access package, open the cabinet door many times in the middle of the scenic spot to share the smart locker operator can cooperate with the scenic spot to combine online and offline operations, and use the cabinet and WeChat *** to place accurate advertisements in the process of user use, in addition to bringing traffic to merchants, it can also be mutually beneficial and reciprocal to enjoy advertising revenue. The 6108 program of scenic spot shared intelligent lockers has been put into major stations, scenic spots, bars, gymnasiums, convention and exhibition centers, water parks, beach baths, playgrounds and other places across the country.
I heard that the multi-functional needle is good, and it is a new type of needle method that is now more widely used, because of the feeling, many people are willing to try.
1. The time setting of the electronic watch is confirmed to the time function by clicking or pressing continuously for 2-3 seconds through the "mode mode" in the lower left corner, as shown in the figure below. >>>More