How to identify the quality of floor tiles? As the title suggests, thank you

Home decoration floor tile acceptance three tricks "look, knock, splash" floor tiles occupy a very important position in home decoration. Not only bathrooms, kitchens, and balcony floors are indispensable, but also the hall, dining room, and living room often need to be decorated with floor tiles. Therefore, the quality of the floor tiles and the quality of the inlay will directly affect the living quality, overall appearance and use function of the house.

So what links should be paid attention to in the inspection of the quality of floor tiles? There are three ways to do this. A look:

There are many varieties of floor tiles according to the variety and process, which can be divided into glazed bricks, non-skid bricks, vitrified tiles, polished tiles, micro powder bricks, seepage tiles and other tiles. There are also many quality grades: excellent, qualified, and other foreign products.

The quality of the floor tile itself and the quality of the inlay are often "exposed" through careful observation: the surface of the floor tile is uneven, the corners are uneven and the surface layer of the floor tile is bright, but there are inclusions in the glaze layer or the glaze layer has color difference, which can generally be judged as the poor quality of the floor tile itself, which belongs to the inferior product that must be replaced. In addition, the quality of floor tile decoration and inlay mainly depends on whether the flatness of the overall surface is greater than 2 mm in the range of 2 meters long, whether the height of the joints between bricks and bricks is greater than millimeters, and whether the straightness of the joints exceeds 3 mm within the length of 5 meters.

Second knock: check whether there is a hollow drum in the floor tile inlay The inspection method usually uses a special small steel hammer or a small hammer and a small iron rod to gently tap the four corners and middle of the floor tiles around the room to detect whether the floor tiles have a hollow drum sound. The sound is crisp and normal; If there is a hollow sound for the hollow drum, it means that the inlay is not real, the decoration quality is unqualified, and it must be removed and replaced in time.

During the inspection, the hollow drum floor tiles were marked, and the floor tiles were found to be broken and violent, and they were also marked to be replaced. A home inspector told reporters that some decoration companies often mislead consumers with "a small amount of hollow drums within the allowable range of quality", which is actually contrary to laws and regulations. Owners are reminded to pay attention to rights protection.

Three splashes: you may wish to splash water test Brick inlay has a drainage slope requirement for balconies, bathrooms, and kitchens. Check whether there are potholes on the floor of the bathroom, kitchen, and balcony, and whether the water is smooth, and you will know if you splash a lot of water.

This "process" can be put to the end, when everything else has been checked, use the water container to fill the water and splash it on the ground, wait for a while, the water will indicate that the floor tiles are uneven, or the slope of the water is not enough. Reference (Xiamen Building Materials Joint Network - Information).

<>1. It can be distinguished by weighing the weight of the floor tile: the floor tile of the same size has a greater density and is heavier. 2. It can be identified by measuring the length of the four sides and the diagonal length of the floor tile

If the length of each side of the floor tile is basically the same, the error is included, and the diagonal length is basically the same, it means that the quality of the floor tile is better. 3. You can pour water on the floor tile to identify: a good floor tile has a higher density, and the wetting is relatively slow after pouring water, on the contrary, if the absorption is fast after pouring water, it means that the quality of this floor tile is poor.

4. You can distinguish by knocking on the floor tile and listening to the sound it makes: put the floor tile vertically on the plane, bend your finger to tap the floor tile, and then listen to the sound it makes, if the sound is crisp, it means that the quality of the floor tile is better, on the contrary, if the sound is dull, it represents the poor quality.

Look at the hardness, the four sides should be positive, the easiest way, after looking at the color, you should take a small piece or buy a piece directly home, pour vinegar or colored permeable substances that you have been exposed to in your daily life and pour it on it, and wait for the next day to get up and wipe it with a rag, it is good if it does not penetrate in, and you have to consider changing it if you penetrate it.

The easiest way to do this is to put ten identical tiles on a flat surface and see if they are the same color. Good tiles should all be the same, and bad tiles will be different, the thickness of the glaze and the color are different. Another look at the incision and geometric size, you can put together a few tiles, if the geometric size is not right, the joint will appear different lengths and right angles are not straight.

The incision must be horizontal, so that there will be no cracks when installed, and there is also to see whether the tile itself is flat. The quality of the tiles is not good, and they will decompose and crack after a few years. The worst tiles, if they are regularly scalded with hot water, will turn into powder in two years.

Ceramic tiles are also a large category in the current decoration, and there are more places to use, so how to identify the worst of ceramic tiles, the following will teach you a few tricks to see: 1 Observe whether the product has obvious quality defects such as missing sleeves, spots, cracks, shaft bubbles, corrugations, etc., and the above defects can never be selected. 2 Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality.

You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand. 3. Water can be dropped on the back of the tile, to see the speed of infiltration after the water is dispersed, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior. 4. After striking each other with two bricks with fingers, the sound is crisp and loud for qualified products, and the sound is low and dull, and there must be inherent quality defects.

5. Due to the large number of wall tiles purchased at one time, if there is an obvious color difference between multiple packages, the decoration effect will be very affected. 6. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. The above are also when I went to buy tiles, those salesmen told me, you can refer to it, I hope my answer can help you, thank you.